WenmarOpen by Wenmar Pro

Service bulletin SA130

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10091801
Published by NHTSA2017-02-15
Manufacturer's numberSA130
Manufacturer's date2016-06-23
NHTSA componentPARKING BRAKE; ELECTRICAL SYSTEM

NHTSA's summary

WHEN PERFORMING SERVICE ON THE ELECTRIC PARKING BRAKE (EPB) SYSTEM, BE AWARE THAT SOME EPB PARTS REQUIRE UNIQUE REMOVAL/REPLACEMENT PROCEDURES. IF THE VEHICLE IS DELIVERED TO THE CUSTOMER WITH INCOMPLETE EPB SERVICE, THE CUSTOMER MAY EXPERIENCE IMPROPER OPERATION OF THE EPB SYSTEM.WHEN THE ELECTRIC PARKING BRAKE IS OPERATED/RELEASED, THE ELECTRIC PARKING BRAKE CONTROL MODULE PERFORMS AUTOMATIC ADJUSTMENT OF THE EPB AND DIAGNOSIS OF EPB SYSTEM.NOTE: IF ANY WARNING LIGHT IS ON AFTER OPERATING THE EPB SWITCH, REFER TO WORKSHOP MANUAL TROUBLESHOOTING.

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Brakes, Electrical system, Parking brake

Vehicles listed
MAZDA CX-52016
MAZDA MAZDA62016

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
04002152022-06-06. Service bulletin. Electric parking brake (EPB) warning light on/EPB will not release in cold weather
SA3372021-02-08. Service bulletin. Electric parking brake (EPB) maintenance mode procedure change.
04-007-20-3713a2020-12-03. Service bulletin. Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise.
04-007-20-37132020-11-03. Service bulletin. Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. To eliminate this concern, the brake pad material has been changed in order to improve the rust-removing capability.
040011733032017-09-27. Service bulletin. Some vehicles may exhibit a squeak type noise from the rear brakes when driving at approximately 6-12mph (10-20km/h) with or without light braking. The noise usually occurs when driving immediately after the parking brake is released. The noise may be caused by poor bake pad adhesive tape contact.
04-001-17-3303a2017-08-10. Service bulletin. Some vehicles may exhibit a squeak type noise from the rear brakes when driving at approximately 6-12mph (10-20km/h) with or without light braking. The noise usually occurs when driving immediately after the parking brake is released. The noise may be caused by poor bake pad adhesive tape contact.
SB-04-002-152016-06-17. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE.