Service bulletin PS414
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10089763 |
| Published by NHTSA | 2017-01-27 |
| Manufacturer's number | PS414 |
| Manufacturer's date | 2015-06-19 |
| NHTSA component | SUSPENSION |
NHTSA's summary
PITSTOP: DIFFICULTY ASSEMBLING STRUT BEARING/INSULATOR - ON SOME OPTIMA VEHICLES, WHEN REPLACING THE STRUT INSULATOR OR STRUT BEARING WITH NEW PARTS YOU MAY ENCOUNTER DIFFICULTY INSTALLING THE NEW STRUT BEARING INTO PLACE ON THE INSULATOR. THIS CONDITION IS DUE TO A CHANGE IN THE DESIGN OF THE STRUT BEARING (A) WHICH RESULTS IN TIGHTER TOLERANCES BETWEEN THE BEARING AND INSULATOR. REFER TO THE PROCEDURE BELOW FOR MORE INFORMATION.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Suspension
| KIA OPTIMA | 2011, 2012, 2013, 2014, 2015 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| TSB_CHA066 | 2020-12-04. Service bulletin. TECHNICAL SERVICE BULLETIN: FRONT STABILIZER LINK REPLACEMENT - This bulletin provides the procedure to replace the front stabilizer links of some Optima (TF/QF), Optima Hybrid (TF HEV) and Rio (UB) vehicles, which may experience an abnormal noise emanating from the front of the vehicle when going over bumps or uneven pavement. |
|---|---|
| TSB-CHA066R1 | 2017-08-31. Service bulletin. TSB: FRONT STABILIZER LINK REPLACEMENT - This bulletin provides the procedure to replace the front stabilizer links of some Optima (TF/QF), Optima Hybrid (TF HEV) and Rio (UB) vehicles, which may experience an abnormal noise emanating from the front of the vehicle when going over bumps or uneven pavement. To resolve the noise concern, perform the procedure outlined in this bulletin to replace the front stabilizer links with the improved parts. |
| PS297 | 2017-08-02. Service bulletin. PIT STOP: SQUEAKING NOISE FROM REAR OF VEHICLE - When addressing a customer complaint related to a squeaking sound emanating from the rear of the vehicle, and the noise can be isolated to the rear suspension, check the right and left rear shock towers as the most likely source of the noise. |
| PS414 | 2017-02-17. Service bulletin. PITSTOP: DIFFICULTY ASSEMBLING STRUT BEARING/INSULATOR - ON SOME OPTIMA VEHICLES, WHEN REPLACING THE STRUT INSULATOR OR STRUT BEARING WITH NEW PARTS YOU MAY ENCOUNTER DIFFICULTY INSTALLING THE NEW STRUT BEARING INTO PLACE ON THE INSULATOR. THIS CONDITION IS DUE TO A CHANGE IN THE DESIGN OF THE STRUT BEARING (A) WHICH RESULTS IN TIGHTER TOLERANCES BETWEEN THE BEARING AND INSULATOR. REFER TO THE PROCEDURE BELOW FOR MORE INFORMATION. |
| TSBCHA040 | 2017-02-06. Service bulletin. SERVICE ACTION: REAR LOWER CONTROL ARM REPLACEMENT PROCEDURE (SA150) - THIS BULLETIN PROVIDES THE PROCEDURE FOR REPLACING BOTH REAR LOWER CONTROL ARMS ON SOME OPTIMA (TF), OPTIMA (QF) AND OPTIMA HYBRID (TF HEV) VEHICLES PRODUCED FROM FEBRUARY 15, 2011 THROUGH APRIL 5, 2012, THAT ARE IN STATES WHERE HEAVY AMOUNTS OF ROAD SALT ARE USED FOR DE-ICING IN THE WINTER MONTHS. |
| PS251 | 2017-02-06. Service bulletin. PITSTOP: ALIGNMENT SPECIFICATIONS FOR OPTIMA - THIS ARTICLE PROVIDES NEW ALIGNMENT SPECIFICATIONS FOR OPTIMA (QF) VEHICLES DUE TO A MODIFICATION TO THE DESIGN OF THE FRONT SUSPENSION. |
| TSBCHA034R1 | 2017-02-03. Service bulletin. TSB: OPTIMA VEHICLE TRACKING DIAGNOSIS & REPAIR - THIS BULLETIN PROVIDES INFORMATION ABOUT SOME 2011MY OPTIMA VEHICLES PRODUCED FROM SEPTEMBER 1, 2010 TO AUGUST 31, 2011 THAT MAY BE SENSITIVE TO ROAD CONDITIONS AND EXHIBIT A SLIGHT DRIFT TO THE LEFT, ESPECIALLY WHEN DRIVING ON LONG STRAIGHT ROADS, AND LEAD TO CUSTOMER ANNOYANCE COMPLAINTS. THIS BULLETIN OUTLINES PROCEDURES TO HELP CORRECT THE “DRIFT TO THE LEFT” CONDITION. |
| TSBCHA071 | 2017-01-26. Service bulletin. TSB: FRONT WHEEL BEARING NOISE - THIS BULLETIN PROVIDES THE PROCEDURE TO REPLACE BOTH FRONT WHEEL BEARINGS ON 2014MY OPTIMA (QF) VEHICLES THAT EXPERIENCE AN UNUSUAL NOISE (HUMMING OR POPPING) THAT IS ISOLATED TO THE FRONT WHEEL BEARING. THE BEARINGS NORMALLY DO NOT HAVE ANY LOOSENESS; THE CONCERN IS SOLELY NOISE-RELATED AND MAY BE VERY DIFFICULT TO PINPOINT. TO ENHANCE CUSTOMER SATISFACTION, THIS BULLETIN OUTLINES THE REPLACEMENT OF BOTH FRONT WHEEL BEARINGS, EVEN WHEN ONLY ONE SIDE IS AFFECTED. |
| TSBCHA066 | 2017-01-24. Service bulletin. "FRONT STABILIZER LINK REPLACEMENT - THIS BULLETIN PROVIDES THE PROCEDURE TO REPLACE THE FRONT STABILIZER LINKS OF SOME OPTIMA (TF/QF), OPTIMA HYBRID (TF HEV) AND RIO (UB) VEHICLES, WHICH MAY EXPERIENCE AN ABNORMAL NOISE EMANATING FROM THE FRONT OF THE VEHICLE WHEN GOING OVER BUMPS OR UNEVEN PAVEMENT. TO RESOLVE THE NOISE CONCERN, PERFORM THE PROCEDURE OUTLINED IN THIS BULLETIN TO REPLACE THE FRONT STABILIZER LINKS WITH THE IMPROVED PARTS." |
| PS297 | 2016-03-16. Service bulletin. SUMMARY TO BE PROVIDED ON A FUTURE DATE. |