Service bulletin PIT-5504
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10078671 |
| Published by NHTSA | 2016-08-13 |
| Manufacturer's number | PIT-5504 |
| Manufacturer's date | 2016-04-11 |
| NHTSA component | ELECTRICAL SYSTEM:SOFTWARE |
NHTSA's summary
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON THE STEPS ON HOW TO PROGRAM THE INSTRUMENT PANEL CLUSTER AFTER AN ANDROID AUTO UPDATE. DEALER WILL NEED TO CONTACT GM TECHNICAL ASSISTANCE CENTER TECHLINE CUSTOMER SUPPORT AT 1-800-828-6860 FOR ADDITIONAL INSTRUMENT PANEL CLUSTER USB PROGRAMMING ASSISTANCE.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Electrical system, Software
| CHEVROLET SILVERADO 1500 | 2016 (the catalog's model; the bulletin names a series or trim of it) |
|---|---|
| CHEVROLET SUBURBAN | 2016 |
| CHEVROLET TAHOE | 2016 |
| GMC SIERRA 1500 | 2016 (the catalog's model; the bulletin names a series or trim of it) |
| GMC YUKON | 2016 |
| GMC YUKON XL | 2016 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 16V084000 | 2016-02-11. ELECTRICAL SYSTEM:SOFTWARE |
|---|
A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.
| 20-NA-132 | 2024-04-05. Service bulletin. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements. |
|---|---|
| PIP5632G | 2023-01-30. Service bulletin. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question. |
| PIP4902Q | 2023-01-30. Service bulletin. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question. |
| 15-NA-083 | 2021-04-20. Service bulletin. Recovery Process from a Controller Reprogramming Interruption During service reprogramming of the T87 TCM, some technicians may notice the TCM may fail during the reprogramming event and become unresponsive to the Service Programming System (SPS), unresponsive to the GDS2 tool. This bulletin addresses corrective actions to attempt to recover the module before declaring the TCM as a bad part and replacing. During reprogramming, an interruption can cause the module to lock up. A module reset may recover the TCM |
| 21NA010 | 2021-03-01. Service bulletin. This technical bulletin provides a procedure to reset the DTCs and take the vehicle for a test drive to verify the codes do not return. |
| 16NA019 | 2021-02-01. Service bulletin. This informational bulletin provides information on Transmission Adaptive Functions and Correcting Low Mileage Harsh Shifts, Slips, or Flares. |
| 16NA205 | 2020-09-28. Service bulletin. This Technical bulletin provides a procedure to correct a customer concern of Blu-Ray Movies Do Not Start After Play Icon Selected on Menu. |
| 17NA291 | 2019-11-25. Service bulletin. This technical bulletin provides a procedure to replace the radio for vehicles with the condition of Intermittent Pop Noise from the Speakers Followed by a Reset of the Radio and Clock due to a software issue. |
| PIT5448E | 2019-08-12. Service bulletin. This Preliminary Information communication advises the technician with a tip when the vehicle stops running after it has been idling for 2.5 hours. This is normal operation of the vehicle built with regular production code BTM and without Regular Production Option Code AVF. If the vehicle was built with regular production code BTM and AVF only has a 1 hour idle time. |
| PIP5369C | 2019-06-03. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have "Service 4 Wheel Drive" message on the Driver Information Center. Provides the technician with additional information to ensure that the TCCM contains the latest software released to address previous issues, also advises of default action changes. Calls out specific circuits to be inspected to help isolate intermittent codes. |