Service bulletin PI0934
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10071590 |
| Published by NHTSA | 2016-06-17 |
| Manufacturer's number | PI0934 |
| Manufacturer's date | 2013-03-01 |
| NHTSA component | ELECTRONIC STABILITY CONTROL (ESC); SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT |
NHTSA's summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Brakes, Driver assistance, Anti-lock brakes
| CHEVROLET EQUINOX | 2013 |
|---|---|
| GMC TERRAIN | 2013 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| PIT5171C | 2023-12-26. Service bulletin. Service Stability, Traction, ABS Rear Wheel Speed DTC Or Chassis Expansion |
|---|---|
| PIT5569B | 2022-08-15. Service bulletin. This Preliminary information communicates direction and examples when diagnosing multiple DTCs, one of which includes U**** Byte 71 DTC. |
| PIT3271J | 2019-12-09. Service bulletin. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection. |
| PI0934 | 2018-04-23. Service bulletin. This preliminary information bulletin provides a procedure for replacing a connector with leads assembly to eliminate the service stabilitrak or antilock brake system warning lamp from being illuminated. |
| PIT5427 | 2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp, service Antilock Braking System, Service Stabilitrak, Service All Wheel Drive, Service Suspension Control, or Hard Steering. Technician may find the following Diagnostic Trouble Codes stored C0196, C0186, C0287, C0710, C0045, C0050, C0800, U0077, U0074, U0125, U0126, U0100, U0101, U0121, U0415, U0432, U0121, and or U0140. Technician should inspect X411 connector for damage or corrosion. Technician will replace any terminals with damage or corrosion. |
| PIT5190 | 2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that may have an Antilock Braking System or Stability/Traction indicator lamp on followed by a "Service Stability" message on the instrument panel cluster Instrument Panel Cluster. Technician may find a Diagnostic Trouble Code C0040 and or C0035 symptom 18 or 0F set in the Electronic Brake Control Module. Technician will need to remove and inspect the effected wheel speed sensor form the knuckle. Technician will replace the hub bearing washer if there is evidence that the tip of the wheel speed sensor has been rubbing. |
| PIC5428F | 2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have the Antilock Braking System, Service Traction Control System, and/or Service Stabilitrak lights are on. The Electronic Brake Control Module may have one or more of the following Diagnostic Trouble Codes C0035-C0050 with specifically symptom 18, 5A, or 0F. Technician will gain access to the correct wheel bear per the Diagnostic Trouble Code that is set. If debris is found on the magnetic encoder ring it will needed to be cleaned. |
| PIC5137P | 2017-08-15. Service bulletin. This Preliminary Information communication advises the technician that the Electronic Brake Control Module and the Brake Pressure Modulator Valve parts restriction has ended. Dealer can now order the parts directly through your Parts Department without General Motors Technical Assistance Center authorization. |
| PIC5428G | 2016-09-23. Service bulletin. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE THE ANTILOCK BRAKING SYSTEM, SERVICE TRACTION CONTROL SYSTEM, AND/OR SERVICE STABILITRAK LIGHTS ARE ON. THE ELECTRONIC BRAKE CONTROL MODULE MAY HAVE ONE OR MORE OF THE FOLLOWING DIAGNOSTIC TROUBLE CODES C0035-C0050 WITH SPECIFICALLY SYMPTOM 18, 5A, OR 0F. TECHNICIAN WILL GAIN ACCESS TO THE CORRECT WHEEL BEAR PER THE DIAGNOSTIC TROUBLE CODE THAT IS SET. IF DEBRIS IS FOUND ON THE MAGNETIC ENCODER RING IT WILL NEEDED TO BE CLEANED. |
| PIT-5171 | 2012-09-24. Service bulletin. GMC/CHEVROLET: A COMMUNICATION FAULT, REGARDING SERVICE STABILITY TRACTION AND ABS REAR WHEEL SPEED DTC OR CHASSIS EXPANSION BUS, WHICH IS RELATED TO AN INTERNAL WIRE BREAK INSIDE WIRE HARNESS INSULATION TO X411 CONNECTOR. MODELS 2010-2012 CHEVROLET EQUINOX & GMC TERRAIN. *PE UPDATED ON 5/9/2013. *KB UPDATED 7/10/2013. *KB UPDATED 2/1/16. *PE |