Service bulletin ASI-44708

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10058064
Published by NHTSA	2015-07-28
Manufacturer's number	ASI-44708
Manufacturer's date	2014-09-01
NHTSA component	EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.

NHTSA's summary

FORD: RADIO FAILS TO OPERATE WHILE IGNITION KEY IN ACCESSORY POSITION WITH VEHICLES EQUIPPED WITH SYNC AND NO REPAIRS REQUIRED DUE TO NORMAL CHARACTERISTIC OF AUDIO SYSTEM. MODEL 2015 F650, 750. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Equipment and accessories

Vehicles listed
FORD F-650 SD	2015 (the catalog's model; the bulletin names a series or trim of it)
FORD F-750 SD	2015 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
SSM 52476	2024-05-03. Service bulletin. All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
TSB160001	2021-12-20. Service bulletin. 49 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C
SIL 790	2021-04-06. Service bulletin. It has been discovered that some hydraulic lines installed by Altec may be in contact with chassis air brake line(s). Some DOT inspections have considered this to be a violation of federal regulation 49 CFR § 393.45 b 2. Over time, chafing of the air brake line(s) could result in loss of air pressure and reduction in braking performance. Altec requires the routing of the hydraulic lines to be inspected no later than the next periodic maintenance interval. The affected unit are some T40P cable placers installed on Ford F750 chassis from May 2015 to January 2020
SSM 49039	2020-08-04. Service bulletin. Some 2015-2019 F-Super Duty and 2016-2019 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an oil leak from the oil filter, crankcase vent oil separator, oil cooler, upper/lower oil pan. This may be due to a clogged crankcase vent oil separator and/or a sealing concern. Do not remove/replace the engine front cover for upper oil pan leaks. Do not check for warpage on the upper oil pan. When the upper oil pan is not bolted to the vehicle, it has a natural tendency to twist slightly due to the manufacturing process for the pan and will not result in an oil leak. The Workshop Manual (Section 303-00 > Diagnosis and Testing > Engine > Engine Oil Leaks) provides information on the usage of fluorescent oil dye to locate the source of an oil leak. Refer to GSB Oil Leaks Weeps And Seeps for more oil leak diagnosis. Continue to monitor OASIS for updates.
SSM 47597	2018-11-19. Service bulletin. Some 2013-2019 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated MIL with only DTC P2074 stored in the powertrain control module (PCM). This may be due to a dirty air filter, replace the filter if necessary. Do not replace the PCM or mass air flow (MAF) sensor for this concern. Instead perform a MAF parameter reset under: Toolbox > Powertrain > Service Functions > Reset/Clear Specified Function > Reset/Clear Functions > MAF Sensor. Engineering is investigating. Monitor OASIS for updates.
17B30-S2	2018-09-10. Service bulletin. Certain 2012-2016 Model Year F-450 ? F-750 and F-59 Commercial Stripped Chassis Vehicles Equipped with a 6.8L Engine Camshaft Roller Follower Replacement Coverage
SSM 47402	2018-09-10. Service bulletin. When performing diagnostics for DTCs P2201, P2452, P2459, P246C and/or P2463, a manual regeneration and diesel particulate filter (DPF) parameter reset using the appropriate scan tool may need to be performed. To perform the manual regeneration, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Manual Regeneration. The scan tool may indicate that a regeneration of the DPF is not recommended at this time, selecting YES on this screen will allow the regeneration process to complete. To perform the DPF parameter reset, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Parameter Reset.
17M04-S1	2018-07-23. Service bulletin. Certain 2014-2016 Model Year F-250 ? F-550 and 2016 Model Year F-650/F-750 Vehicles, With 6.7L Diesel Engine - Crankcase Ventilation Oil Separator Assembly
SSM 47009	2018-05-29. Service bulletin. The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
SSM 46345	2017-03-15. Service bulletin. SOME 2005-2017 F-SUPER DUTY 4X4 VEHICLES OPERATED IN EXTREME DUST, MUD OR TAR SAND CONDITIONS MAY EXHIBIT ACCELERATED 4X4 VACUUM HUB SEAL AND OR WHEEL BEARING WEAR AS A RESULT OF HARSH OPERATING CONDITIONS. A KNUCKLE SEAL SHIELD KIT IS NOW AVAILABLE FOR CUSTOMER PURCHASE. THE KIT IS DESIGNED FOR SEVERE DUTY AND IS NON WARRANTABLE. THE KNUCKLE SEAL SHIELD KIT GC3Z-54024A38-A INCLUDES AN INSTRUCTION SHEET.