WenmarOpen by Wenmar Pro

Service bulletin SI B65 13 13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10057762
Published by NHTSA2015-06-24
Manufacturer's numberSI B65 13 13
Manufacturer's date2014-10-01
NHTSA componentELECTRICAL SYSTEM:WIRING:INTERIOR/UNDER DASH

NHTSA's summary

BMW: SOME BMW MODELS CENTRAL INFORMATION DISPLAY (CID) ARE BLANK AND DISPLAY "NO SIGNAL". *TA

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Electrical system, Wiring and fuses

Vehicles listed
BMW 428I2014
BMW 428XI2014
BMW 435I2014
BMW 435XI2014
BMW 528I2014
BMW 535I2014
BMW ACTIVE HYBRID 32014
BMW X32014
BMW X52014

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
24V6080002024-08-13. ELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS/RECEPTACLES; ENGINE AND ENGINE COOLING:COOLING SYSTEM:PUMP

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
B6121152018-12-10. Service bulletin. The Instrument Cluster Displays Various Check Control Messages. The instrument cluster displays various check control messages. Signal invalid. The wiring harness below the micro filter housing (right front area of the bulkhead) is damaged from washer fluid leaking into the harness.
B5109162018-12-10. Service bulletin. Automatic Trunk Does Not Open Fully. Automatic trunk does not open fully on first attempt when using any opening options. During the first unlock attempt, whether using: the inside trunk switch, remote key, Smart opener (foot swipe), the automatic trunk lid only opens part way as shown. HKL software and trunk latch adjustment issue.
B6121152018-12-10. Service bulletin. The Instrument Cluster Displays Various Check Control Messages. This includes messages for the PDC (Park Distance Control), DSC (Dynamic Stability Control) and windshield washer system. There can be many different fault codes stored in the vehice. Signal invalid. The wiring harness below the micro filter housing (right front area of the bulkhead) is damaged from washer fluid leaking into the harness.
B5207162018-12-10. Service bulletin. ?Electrostatic discharge damage the seat module. Replace the seat module. Improve ground wiring connections on seat frame.
B6121152018-12-10. Service bulletin. THE INSTRUMENT CLUSTER DISPLAYS VARIOUS CHECK CONTROL MESSAGES. The instrument cluster displays various check control messages. THE INSTRUMENT CLUSTER DISPLAYS VARIOUS CHECK CONTROL MESSAGES. The instrument cluster displays various check control messages. This includes messages for the PDC (Park Distance Control), DSC (Dynamic Stability Control) and windshield washer system. There can be many different fault codes stored in the vehicle. The wiring harness below the micro filter housing (right front area of the bulkhead) is damaged from washer fluid leaking into the harness.
6501132018-11-26. Service bulletin. Airbag Warning Lamp Illuminated; Shorted Wire in Front Seat Harness. The airbag warning lamp (AWL) is illuminated. One or more of the following faults will be stored in the ACSM (Advanced Crash Safety Module) as displayed in ISTA: 930979: Side airbag, driver: short-circuit to negative 930955: CAK, driver: short-circuit to earth 930925: Seat belt tensioner, driver: short-circuit to earth 9309CA: Seat belt lock contact, front passenger: communication fault 93095B: Active head restraint, front passenger: short-circuit to negative 93095F: Active head restraint, front passenger: line coupled 93093A: Seat belt tensioner, front passenger: resistance too great 93095E: Active head restraint, front passenger: resistance too great 9309CA: Seat belt lock contact, front passenger: break in circuit 930982: Side airbag, front passenger: resistance too great CAUSE A short in the wiring harness in the driver's or/and passenger's seat
6516142018-11-13. Service bulletin. Central Information Display Intermittently Dimming or Flashing Off/On. Intermittently the Central Information Display (CID) dims and/or flashes off/on. There are two possible root causes for this issue. Cause 1: Voltage supply error from the Headunit-high (HU-H) to the Central Information Display (CID) when the display brightness is set to 60% or higher Cause 2: Calibration data for dimming the Central Information Display (CID) at high temperatures or bright sunlight is set incorrectly internally in the CID Affected Central Information Displays were manufactured from 02/01/2013 to 06/09/2014. The manufacturing date is included in the serial number printed on the parts label on the CID. IMPORTANT: The manufacturing date is written in the following way: dd mm yy Example: The manufacturing date of August 15, 2013 is printed on the label in the following way: 15 08 13
6311132018-11-13. Service bulletin. One or Both Trunk Lid Tail Lamps Malfunction. One of the tail lamps is out in the trunk lid light cluster. This is accompanied by one of the following CCM (Check Control Messages): z Tail lamp in tailgate malfunction z Rear fog light malfunction z Reversing light malfunction z ISTA shows one or more fault(s) present: 80486A - Short-circuit in left-hand reversing light 80486B - Short-circuit in right-hand reversing light 80487F - Rear fog light, left, faulty 804880 - Rear fog light, right, faulty CAUSE The socket housing in the rear lamp mounted on the trunk lid is defective.
B6121152018-11-05. Service bulletin. The Instrument Cluster Displays Various Check Control Messages This Service Information bulletin supersedes SI B61 21 15 dated March 2016.. The instrument cluster displays various check control messages. This includes messages for the PDC (Park Distance Control), DSC (Dynamic Stability Control) and windshield washer system. There can be many different fault codes stored in the vehicle. Signal invalid. The wiring harness below the micro filter housing (right front area of the bulkhead) is damaged from washer fluid leaking into the harness.
SI B61 18 142015-08-06. Service bulletin. BMW MODL F25(X3): INFORMATION REGARDING VARIOUS ELECTRICAL FAULTS CAUSED BY SHORTED K-CAN2. *LJ