Service bulletin PI-0276-A
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10037685 |
| Published by NHTSA | 2011-06-03 |
| Manufacturer's number | PI-0276-A |
| Manufacturer's date | 2011-12-01 |
| Replaces | PI-0276-B |
| NHTSA component | SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:ABS WARNING LIGHT |
NHTSA's summary
GM: THE ABS LIGHT MAY BE ON AND CAUSED BY AN INCORRECT INSTALLATION OF THE WHEEL SPEED SENSOR. *RM UPDATED 3/12/12. *PE
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Brakes, Anti-lock brakes
| CHEVROLET CRUZE | 2011 |
|---|---|
| CHEVROLET VOLT | 2011 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| PIT3271J | 2019-12-09. Service bulletin. This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection. |
|---|---|
| PIC5428F | 2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have the Antilock Braking System, Service Traction Control System, and/or Service Stabilitrak lights are on. The Electronic Brake Control Module may have one or more of the following Diagnostic Trouble Codes C0035-C0050 with specifically symptom 18, 5A, or 0F. Technician will gain access to the correct wheel bear per the Diagnostic Trouble Code that is set. If debris is found on the magnetic encoder ring it will needed to be cleaned. |
| PIC5383D | 2017-08-15. Service bulletin. This Preliminary Information communication advises the technician that the Electronic Brake Control Module and Brake Pressure Modulator Valve for the Chevrolet Volt are being placed on restriction through the General Motors Technical Assistance Center. |
| PIC5428G | 2016-09-23. Service bulletin. THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLES THAT MAY HAVE THE ANTILOCK BRAKING SYSTEM, SERVICE TRACTION CONTROL SYSTEM, AND/OR SERVICE STABILITRAK LIGHTS ARE ON. THE ELECTRONIC BRAKE CONTROL MODULE MAY HAVE ONE OR MORE OF THE FOLLOWING DIAGNOSTIC TROUBLE CODES C0035-C0050 WITH SPECIFICALLY SYMPTOM 18, 5A, OR 0F. TECHNICIAN WILL GAIN ACCESS TO THE CORRECT WHEEL BEAR PER THE DIAGNOSTIC TROUBLE CODE THAT IS SET. IF DEBRIS IS FOUND ON THE MAGNETIC ENCODER RING IT WILL NEEDED TO BE CLEANED. |
| SB-12063 | 2012-05-23. Service bulletin. CHEVROLET: ON CERTAIN MODEL YEAR CRUZE AND ORLANDO VEHICLES, SERVICE PROCEDURE BEEN PROVIDED REGARDING ELECTRONIC BRAKE CONTROL MODULE (EBCM) CONCERNING UNEVEN PEDAL FEEL AT HIGH SPEED ABS BRAKING. *PE |
| PIC-5455 | 2011-06-27. Service bulletin. GM: 2011 CRUZE. THERE MAY BE AN INTERMITTENT NO START. THE TRACTION, MALFUNCTION, ABS OR STABILITY LIGHT MAY BE ON. THERE ARE MULTIPLE POSSIBLE CODES STORED. *RM UPDATED 12/6/11. *PE |
| PI-0456 | 2011-06-27. Service bulletin. GM: 2011 CRUZE. THERE IS AN OPTIONAL CALIBRATION FOR THE STABILITRAK SYSTEM. SOME MAY WANT A MORE AGRESSIVE STABILITRAK PERFORMANCE DURING LANE CHANGES. *RM |
| PIC-5428 | 2011-06-15. Service bulletin. GM: THE BRAKE, TRACTION, OR STABILITY LIGHTS ARE ON BECAUSE OF DEBRIS STUCK ON THE WHEEL SPEED SENSOR. UPDATED ON 06/15/2011. *KB UPDATED ON 06/20/2011. *RM UPDATED 6/27/11. *PE UPDATED 10/3/11. *PE UPDATED 05/08/2013 *JS UPDATED ON 7/9/2013. *KB UPDATED 7/28/14. *PE |
| PI-0321 | 2011-06-07. Service bulletin. GM: THERE ARE PROBLEMS WITH SHIFTING. THERE IS A CALIBRATION PROBLEM WITH THE TRANSMISSION CONTROL MODULE. *RM UPDATED ON 6/15/2011. *KB |
| PI-0276 | 2011-05-09. Service bulletin. GM: ABS LIGHT MAY BE ON. THERE MAY ALSO BE AN INCORRECT INSTALLATION A WHEEL SPEED SENSOR. *RM |