Service bulletin TB-105
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10030804 |
| Published by NHTSA | 2009-12-04 |
| Manufacturer's number | TB-105 |
| Manufacturer's date | 2008-12-01 |
| NHTSA component | EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL |
NHTSA's summary
TRIUMPH MOTORCYCLE: APPENDICES A AND B FOR DAYTONA 675 FROM VIN 377510. TORQUE FIGURES, OIL PUMP INSPECTION; AND SERVICE MANUAL SUPPLEMENT. NO MODEL YEARS LISTED. *PE
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Equipment and accessories, Labels and manuals
| TRIUMPH DAYTONA 675 | 2006, 2007, 2008 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SMT-COM01 | 2023-12-11. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2023-06 and dealers should begin using it immediately. |
|---|---|
| 22714 | 2023-01-03. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2022-11 and dealers should begin using it immediately. |
| 22651 | 2023-01-03. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2022-10 and dealers should begin using it immediately. |
| SMT-TN-143 | 2021-05-10. Service bulletin. A new gear position sensor and fly lead have been introduced to the above models from engine number 596481. If replacing the gear position sensor or fly lead from engine number 596481, refer to the EPC for the part numbers. If replacing the gear position sensor up to engine number 596480, a fly lead must also be fitted to enable the new sensor to be connected to the main harness. To facilitate this, a parts kit (part number T1294242) is available. |
| SMT-COM06-17MAR2 | 2020-04-13. Service bulletin. Dealer notice announcing the availability of Diagnostic software 2020-4.2 available and dealers should begin using it immediately. |
| SMT-COM02-18FEB2 | 2020-03-16. Service bulletin. Dealer notice announcing the auto-issue of three new service tools. |
| SMT-TB201-20DEC2 | 2020-01-21. Service bulletin. Technical Bulletin 200 provides instructions that apply to Steering Lock and Keys, Neutral Position Adaption, Triumph Diagnostic Tool - End of Support for Microsoft Windows 7®, Triumph Diagnostic Tool - Internet Connection and Minimum eEquipment Requirement, Torque Change, Clutch Cable, Camshaft Frame Installation, Immobiliser Antenna Wire Routing. |
| SMT-Com01-23Janu | 2018-02-21. Service bulletin. Dealer notice announcing that Diagnostic Software 2018-1 is now available and dealers should begin using it immediately. |
| SMT-TN 160 1 Nov | 2017-11-03. Service bulletin. Technical service bulletin 160 addressing 9 service instructions, some of which apply to all models. Instructions relate to frame bolt tightening sequence, new harness and harness/gear position sensor parts kit, panniers, instrument pack washer, side stand fixing, lower yoke pinch bolt tightening sequence, update to service manual full specifications, crankcase spares kit and sliding caliper seal kit. |
| SMT-TN 159 1 Oct | 2017-11-03. Service bulletin. Technical service bulletin 159 addressing 19 service instructions, some of which apply to all models. Instructions relate to piston and piston top ring, alternator rotor retaining bolt, rear brake hose guide, auxiliary lights, headlight spares, gear selector drum and neutral light switch, pulser ring fixings, side stand fixing, battery terminal cover, heated grip fixings, headstock bearing adjustment, front and rear diretion indicator fixings, swinging arm, throttle linkage cleaning, headlight label, clutch lifter piece, rear brake caliper bleed nipple and owner's handbook. |