WenmarOpen by Wenmar Pro

Service bulletin 07119

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10022674
Published by NHTSA2007-09-19
Manufacturer's number07119
NHTSA componentSERVICE BRAKES, AIR:DISC

NHTSA's summary

FORD STATES BRAKE DRAG MAY CAUSE AN ODOR OR REDUCED POWERTRAIN PERFORMANCE. THIS COULD ALSO CAUSE THE INTEGRAL VEHICLE DYNAMICS (IVD) LIGHT AFTER DRIVING A GIVEN DISTANCE DUE TO PRESSURE NOTED IN THE MODULE *NJ

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Brakes

Vehicles listed
FORD EDGE2007
LINCOLN MKX2007

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
SSM 512612023-01-06. Service bulletin. Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
SSM 511202022-10-11. Service bulletin. Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
SSM 500642021-09-04. Service bulletin. Some 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
AS-217692011-07-07. Service bulletin. FORD: IF THERE IS AN INTERMITTENT LACK OF POWER, SURGE, OR HESITATION WHILE DRIVING THE BRAKES WILL OVERRIDE ACCELERATION. *RM
071722007-11-07. Service bulletin. SOME 2007 EDGE/MKX VEHICLES BUILT BEFORE 6/1/07 (FWD ONLY) MAY EXHIBIT AN ABS LAMP ON C1165/C1175 AND/OR C1235/C1236. *NJ