Service bulletin 10
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10017995 |
| Published by NHTSA | 2005-12-13 |
| Manufacturer's number | 10 |
| Manufacturer's date | 2005-09-22 |
| NHTSA component | ELECTRICAL SYSTEM |
NHTSA's summary
MAZDA SERVICE PROGRAM #10 - THE MALFUNCTION INDICATOR LIGHT (MIL) MAY ILLUMINATE DURING AN OBD CHECK AT AN INSPECTION/MAINTENANCE (I/M) STATION CAUSING THE VEHICLE TO FAIL THE INSPECTION/MAINTENANCE STATION (I/M) TEST EVEN THOUGH THE VEHICLE ITSELF HAS NO PROBLEM. *TT
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Electrical system
| MAZDA MAZDA6 | 2003, 2004, 2005 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 09-022-26 | 2026-08-04. Service bulletin. This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. 09-042/04 12/10/04 DESCRIPTION Some vehicles may exhibit inoperative electric rear window defroster grid lines, integral antenna concerns causing radio reception issues or terminal tabs pulled from the rear window glass. Follow the diagnostic and repair procedures included in this service information to inspect and service rear defroster grid lines, integral antenna concerns or broken terminal tabs. |
|---|---|
| 09-038-24 | 2024-09-04. Service bulletin. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer’s responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the “Speedometer Replacement Label”. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda’s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO’s services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense. |
| SA-032-23a | 2023-11-02. Service bulletin. If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. |
| 09-016-23 | 2023-03-03. Service bulletin. Speedometer replacement procedure |
| 09-024-22 | 2022-08-04. Service bulletin. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. |
| 01-006-22 | 2022-07-06. Service bulletin. This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure. |
| 0900716 | 2022-06-06. Service bulletin. Speedometer replacement procedure |
| 0100516 | 2022-06-06. Service bulletin. Battery test procedure requirements using the GR81291 |
| 0100416 | 2022-06-06. Service bulletin. Battery Maintenance |
| 0100116 | 2022-06-06. Service bulletin. Engine Start /Stop Procedure with room fuse removed |