WenmarOpen by Wenmar Pro

Service bulletin 1801204

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10006451
Published by NHTSA2004-05-03
Manufacturer's number1801204
Manufacturer's date2004-03-16
NHTSA componentENGINE AND ENGINE COOLING:ENGINE

NHTSA's summary

WOT ACCELERATION STUMBLE/NUMBER 4 SPARK PLUG WIRE APPEARANCE. *TT

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Engine

Vehicles listed
DODGE NEON2003, 2004

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
90032152023-01-09. Service bulletin. Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
683328102022-10-17. Service bulletin. Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
90032152022-10-17. Service bulletin. Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
R2118796A2021-05-03. Service bulletin. Valve Body. These may cause over drive cycling.
11001052005-02-24. Service bulletin. DUAL EXHAUST TIPS ARE NOT IN EQUAL FORE/AFT ALIGNMENT. *EH
18024042004-07-30. Service bulletin. IDLE FLUCTUATION AND OR MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION DIAGNOSTIC TROUBLE CODES P0300, P0301, P0302, P0303 OR P0304. *TT
18025042004-07-20. Service bulletin. FLASH: DRIVEABILITY IMPROVEMENTS. *TT THIS BULLETIN REPLACES PREVIOUS DATED 06-15-04. *TT
09007042004-05-03. Service bulletin. IRREGULAR ENGINE SNAPPING SOUND. *TT
1100142004-04-05. Service bulletin. EXHAUST TIP ALIGNMENT. 2004 NEON SRT4 ALSO INCLUDED. *TT
11001042004-04-05. Service bulletin. EXHAUST TIP ALIGNMENT. 2004 NEON SRT4 ALSO INCLUDED. *TT