Service bulletin 1803503
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10004539 |
| Published by NHTSA | 2003-12-18 |
| Manufacturer's number | 1803503 |
| Manufacturer's date | 2003-10-03 |
| NHTSA component | ENGINE AND ENGINE COOLING:ENGINE |
NHTSA's summary
HESITATION OR REDUCED POWER AFTER COMPLETING AN UPSHIFT DURING MODERATE ACCELERATION AND/OR AFTER A PROLONGED CLOSED THROTTLE EVENT. *TT
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Engine
| DODGE VIPER | 2003 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 9003215 | 2023-01-09. Service bulletin. Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine. |
|---|---|
| 68332810 | 2022-10-17. Service bulletin. Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.]. |
| 9003215 | 2022-10-17. Service bulletin. Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine. |
| R2118796A | 2021-05-03. Service bulletin. Valve Body. These may cause over drive cycling. |
| C31 | 2004-02-24. Service bulletin. CUSTOMER SATISFACTION NOTIFICATION NO. C31 - COOLING FAN MODULE. A CHECK BALL RETAINER IN THE COOLING FAN MODULE MAY BECOME DISLODGED. *TT |
| 1100203 | 2003-11-11. Service bulletin. EXHAUST RATTLE SOUND WHILE DRIVING. *TT |
| 03006 | 2003-06-05. Service bulletin. INTAKE VALVE MACHINING - SUPPLEMENT A. *TT |