WenmarOpen by Wenmar Pro

Service bulletin 03014

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10003520
Published by NHTSA2003-10-22
Manufacturer's number03014
Manufacturer's date2003-08-29
NHTSA componentPOWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)

NHTSA's summary

SERVICE ACTION 03014 - POWERTRAIN CONTROL MODULE (PCM) ELECTRICAL CONNECTOR SEAL INSPECTION/REPAIR PROCEDURE. *TT

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Transmission and driveline, Automatic transmission, Transmission control module

Vehicles listed
CHRYSLER PACIFICA2004
CHRYSLER PT CRUISER2003, 2004
CHRYSLER SEBRING2004
CHRYSLER TOWN AND COUNTRY2004
CHRYSLER VOYAGER2003
DODGE CARAVAN2003
DODGE CARAVAN2004
DODGE RAM 15002004 (the catalog's model; the bulletin names a series or trim of it)
DODGE RAM 25002004 (the catalog's model; the bulletin names a series or trim of it)
DODGE RAM 35002004 (the catalog's model; the bulletin names a series or trim of it)
DODGE STRATUS2004
JEEP LIBERTY2004

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
05V4620002005-10-06. POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT
04V1130002004-03-04. POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)
03V5030002003-12-04. POWER TRAIN:AUTOMATIC TRANSMISSION

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
18-016-132022-07-18. Service bulletin. This bulletin involves reprogramming the Powertrain Control Module with new software. The Technician may discover that P0128 - Thermostat Rationality DTC is present. This DTC is a two trip code and is matured if a significant difference exists between the PCM predicted and actual engine coolant temperature during engine warm-ups. The PCM calibration may improperly mature a P0128 DTC because the airflow across the coolant temperature sensor during colder ambient temperatures, 50° F (10° C) or below, causes the predicted coolant temperature to deviate from the actual coolant temperature.
18-016-132021-03-15. Service bulletin. This bulletin involves reprogramming the Powertrain Control Module with new software. The Technician may discover that P0128 - Thermostat Rationality DTC is present. This DTC is a two trip code and is matured if a significant difference exists between the PCM predicted and actual engine coolant temperature during engine warm-ups. The PCM calibration may improperly mature a P0128 DTC because the airflow across the coolant temperature sensor during colder ambient temperatures, 50° F (10° C) or below, causes the predicted coolant temperature to deviate from the actual coolant temperature.
18-042-142018-06-18. Service bulletin. Generic Powertrain Control Module (PCM) Procedure This bulletin involves programming a generic PCM with software.
18-112-162017-11-03. Service bulletin. Flash: Powertrain Diagnostic And System Enhancements (X70 Warranty Extension) This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. The following software enhancement is available: Prevent Catalyst Monitor From Clearing OBD Readiness.
SB-18-014-092009-09-23. Service bulletin. CHRYSLER/JEEP: FLASH: ESP SYSTEM MAY PREMATURELY ACTIVATE MOMENTARILY WHEN NEGOTIATING A CURVE OR MIL ILLUMINATION DUE TO DIAGNOSTIC TROUBLE CODE P0340, P0344 OR P0116. THIS INVOLVES SELECTIVELY ERASING AND REPROGRAMMING THE POWERTRAIN CONTROL MODULE (PCM) WITH NEW SOFTWARE. *PE UPDATED 5/24/10. *PE
18029072007-06-15. Service bulletin. GENERIC POWERTRAIN CONTROL MODULE (PCM) PROCEDURE. *KB
08030062007-03-23. Service bulletin. POWERTRAIN CONTROL MODULE INITIALIZATION. *KB
08015052005-04-26. Service bulletin. POWERTRAIN CONTROL MODULE INITIALIZATION. *SC
21004052005-02-25. Service bulletin. TRANSMISSION DELAY ENGAGEMENT. *EH
21003052005-02-25. Service bulletin. TRANSFER GEAR WHINE SOUND BETWEEN 68 MPH AND 84 MPH EITHER ACCELERATING OR DECELERATING. *EH