{"vehicle":{"id":"2020_peterbilt_348","year":2020,"make":"Peterbilt","model":"348"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2022210","date":"2022-04-25","manufacturer":null,"component":"Steering","summary":"Issue:\nOn certain trucks, the fasteners that attach the steer arm to the steering knuckle may fail. If this happens, the steer arm could separate from the steering knuckle and cause a loss of steering control.\nNote: This recall only affects trucks equipped with a Dana D-series steer axle.\n\nSafety Risk:\nA loss of steering control could increase the risk of a crash.\n\nCorrective Actions:\nPACCAR will notify owners by mail. The corrective actions for this recall are under development.","mfr_campaign":"22KWB & 22PBB","units":985,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["348"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2022210"},{"source":"nhtsa","country":"us","campaign":"22V277000","date":"2022-04-25","manufacturer":"PACCAR Incorporated","component":"STEERING:CRITICAL FASTENERS","summary":"PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles.  The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.","mfr_campaign":"22 PBB and 22 KWB","units":17641,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["348"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/22V277000"},{"source":"tc","country":"ca","campaign":"2021323","date":"2021-05-26","manufacturer":null,"component":"Fuel System","summary":"Issue:\nOn certain trucks, the fuel rail assembly could develop a leak.\nNote: This recall only affects trucks equipped with a Cummins L9 or ISX12 diesel engine.\n\nSafety Risk:\nA fuel leak can create the risk of a fire.\n\nCorrective Actions:\nCummins will notify owners by mail and instruct you to take your truck to a Cummins authorized service center to inspect the fuel rail. If damage is found, the fuel rail and fuel lines will be replaced. If no damage is found, the fuel rail will be reassembled with new crush washers using a special tool.","mfr_campaign":"21KWC & 21PBD","units":19,"do_not_drive":null,"park_outside":null,"notification":"Recalls Audit","match":"exact","models":["348"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2021323"},{"source":"nhtsa","country":"us","campaign":"21V391000","date":"2021-05-26","manufacturer":"PACCAR Incorporated","component":"FUEL SYSTEM, DIESEL:FUEL INJECTION SYSTEM:FUEL RAIL","summary":"PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles.  The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.","mfr_campaign":"21KWC, 21PBD","units":612,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["348"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/21V391000"},{"source":"tc","country":"ca","campaign":"2020551","date":"2020-11-12","manufacturer":null,"component":"Structure","summary":"Issue:\nOn certain trucks, the welds that attach the trailer hitch may crack due to improper welding. As a result, the hitch could detach from the truck while towing a trailer.\nNote: This recall only affects certain trucks with trailer hitches installed by Commercial Truck Equipment.\n\nSafety Risk:\nA trailer that detaches from a truck could create a risk of a crash.\n\nCorrective Actions:\nCommercial Truck Equipment will notify owners by mail and instruct you to take your truck to a dealer to inspect the trailer hitch and repair or replace it, as necessary. You should stop using the trailer hitch until the inspection and repair have been completed.","mfr_campaign":"RP0003","units":91,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["348"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2020551"},{"source":"tc","country":"ca","campaign":"2020399","date":"2020-08-27","manufacturer":null,"component":"Suspension","summary":"Issue:\nOn certain trucks, the lift axle pivot bolts may be too short and may not be properly tightened. As a result, the bolts could come loose or break. If this happens, parts could fall from the truck.\nNote: This recall only affects trucks built with Watson Chalin SL2065 lift axles.\n\nSafety Risk:\nLarge fasteners that fall on the road could create a road hazard for others and increase the risk of a crash.\n\nCorrective Actions:\nPACCAR will notify owners by mail and instruct you to take your truck to a dealer to inspect and replace the lift axle pivot bolts, as necessary.","mfr_campaign":"20PBE & 20KWC","units":502,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["348"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2020399"},{"source":"nhtsa","country":"us","campaign":"20V506000","date":"2020-08-26","manufacturer":"PACCAR Incorporated","component":"POWER TRAIN:AXLE ASSEMBLY","summary":"PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065).  The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts.","mfr_campaign":"20PBE and 20KWC","units":1097,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["348"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/20V506000"},{"source":"nhtsa","country":"us","campaign":"19V911000","date":"2019-12-19","manufacturer":"PACCAR Incorporated","component":"POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT; POWER TRAIN:DRIVELINE:DRIVESHAFT","summary":"PACCAR Incorporated  (PACCAR) is recalling certain 2020 Kenworth T800, T880 and W990 and Peterbilt 348, 367, 389, 520, and 567 vehicles.  The forward rear axle output shafts may have been improperly heat treated during manufacturing, possibly resulting in the shafts fracturing.","mfr_campaign":"19KWE and 19PBG","units":148,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["348"],"built_from":"2019-11-22","built_to":"2019-12-04","url":"https://open.wenmarpro.com/recalls/nhtsa/19V911000"},{"source":"nhtsa","country":"us","campaign":"19V618000","date":"2019-08-22","manufacturer":"PACCAR Incorporated","component":"STEERING:COLUMN","summary":"PACCAR Incorporated (PACCAR) is recalling certain 2019-2020 Peterbilt 337 and 348 vehicles.  An incorrectly located weld in the steering shaft may crack and cause the lower shaft within the steering column to separate from the mating yoke.","mfr_campaign":"19PBD","units":109,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["348"],"built_from":"2018-11-19","built_to":"2019-08-15","url":"https://open.wenmarpro.com/recalls/nhtsa/19V618000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}