{"vehicle":{"id":"2020_nissan_altima","year":2020,"make":"Nissan","model":"Altima"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"nhtsa","country":"us","campaign":"25V437000","date":"2025-06-27","manufacturer":"Nissan North America, Inc.","component":"ENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL","summary":"Nissan North America, Inc. (Nissan) is recalling certain 2021-2024 Rogue, 2019-2020 Altima, 2019-2022 Infiniti QX50, and 2022 Infiniti QX55 vehicles equipped with 3-cylinder 1.5L or 4-cylinder 2.0L variable compression turbo (VC-Turbo) engines. The engine bearings may have manufacturing defects that can lead to engine failure.","mfr_campaign":"R25A8/A9 R25B1/B2/D1","units":443899,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["ALTIMA"],"built_from":null,"built_to":"2019-12-11","url":"https://open.wenmarpro.com/recalls/nhtsa/25V437000"},{"source":"tc","country":"ca","campaign":"2023504","date":"2023-09-11","manufacturer":null,"component":"Visual System","summary":"Issue:\nOn certain vehicles, the rearview camera wiring harness could be damaged by movement and vibrations. If this happens, the rearview camera image may not display correctly or may not display at all. Canadian regulations require the rearview image to display when reversing.\n\nSafety Risk:\nA rearview camera image that doesn't display could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.\n\nCorrective Actions:\nNissan will notify owners by mail and advise you to bring your vehicle to a dealership to inspect the rearview camera wiring harness, apply a protective tape, and reroute it. If the wiring is damaged, the rearview camera and wiring harness will be replaced.","mfr_campaign":"R23C3","units":14994,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["ALTIMA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2023504"},{"source":"nhtsa","country":"us","campaign":"23V628000","date":"2023-09-08","manufacturer":"Nissan North America, Inc.","component":"BACK OVER PREVENTION: SENSING SYSTEM: CAMERA","summary":"Nissan North America, Inc. (Nissan) is recalling certain 2019-2021 Altima and 2020-2021 Sentra vehicles.  Damage to the camera harness can cause distortion or loss of the rearview camera display image.  As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, \"Rear Visibility.\"","mfr_campaign":"R23C3","units":153376,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["ALTIMA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/23V628000"},{"source":"tc","country":"ca","campaign":"2021140","date":"2021-03-12","manufacturer":null,"component":"Tires","summary":"Issue:\nCertain vehicles were built with tires that may have been cured too long. As a result, the sidewall could crack or the tread and belts could separate. This could lead to a sudden loss of air pressure and could cause a tire failure.\nNote: This recall only affects certain Continental tires, with specific date codes and mold numbers.\n\nSafety Risk:\nA tire failure could cause a loss of control and increase the risk of a crash.\n\nCorrective Actions:\nNissan will notify the owners by mail and instruct them to take the vehicle to a dealer to inspect and replace the tires, if necessary.","mfr_campaign":"PC798","units":1393,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["ALTIMA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2021140"},{"source":"nhtsa","country":"us","campaign":"21V169000","date":"2021-03-11","manufacturer":"Nissan North America, Inc.","component":"TIRES:SIDEWALL; TIRES","summary":"Nissan North America, Inc. (Nissan) is recalling certain 2019-2020 Altima and 2018-2021 Titan vehicles equipped with Continental tires.  On the affected vehicles, it is possible that one or more tires were cured for too long during tire production.","mfr_campaign":"PC798","units":36141,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["ALTIMA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/21V169000"},{"source":"tc","country":"ca","campaign":"2021117","date":"2021-03-05","manufacturer":null,"component":"Steering","summary":"Issue:\nOn certain vehicles, the steering tie rod nut may not have been properly tightened. As a result, the tie rod could become loose and separate from the steering knuckle. This could result in a loss of steering control.\n\nSafety Risk:\nA loss of steering control could create a risk of a crash.\n\nCorrective Actions:\nNissan will notify owners by mail and instruct you take your vehicle to a dealer to re-tighten the nut on the left and right steering tie rods. If the nut is missing, a new nut and washer will be installed.","mfr_campaign":"PC795","units":29,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["ALTIMA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2021117"},{"source":"nhtsa","country":"us","campaign":"21V138000","date":"2021-03-04","manufacturer":"Nissan North America, Inc.","component":"STEERING:LINKAGES:TIE ROD ASSEMBLY","summary":"Nissan North America, Inc. (Nissan) is recalling certain 2020-2021 Nissan Altima vehicles.  The tie rod ball joint fastener was not tightened properly, which could result in the tie rod ball joint detaching from the steering knuckle.","mfr_campaign":"PC795","units":2407,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["ALTIMA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/21V138000"},{"source":"nhtsa","country":"us","campaign":"20V685000","date":"2020-11-05","manufacturer":"Nissan North America, Inc.","component":"TIRES","summary":"Nissan North America, Inc. (Nissan) is recalling certain 2020 Altima S grade vehicles equipped with Continental ProContact TX tires, size 215/60 R16 H, with TIN date code 3320 and Mold ID S-419149.  The tires may have been over cured.","mfr_campaign":"PC765","units":2214,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["ALTIMA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/20V685000"},{"source":"nhtsa","country":"us","campaign":"20V570000","date":"2020-09-22","manufacturer":"Nissan North America, Inc.","component":"VISIBILITY:GLASS, SIDE/REAR","summary":"Nissan North America, Inc. (Nissan) is recalling certain 2020 Altima, Maxima and Leaf vehicles.  The rear window glass may not remain properly secured to the vehicle.","mfr_campaign":"PC752","units":150,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["ALTIMA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/20V570000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}