{"vehicle":{"id":"2019_hyundai_ioniq","year":2019,"make":"Hyundai","model":"Ioniq"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2021735","date":"2021-12-07","manufacturer":null,"component":"Powertrain","summary":"Issue:\nOn certain Ioniq EV models, the vehicle could accelerate after the accelerator pedal is released.\nNote: This problem can only happen under certain conditions after the vehicle enters \"fail-safe\" mode.\n\nSafety Risk:\nA vehicle that continues to accelerate could create the risk of a crash.\n\nCorrective Actions:\nHyundai will notify owners by mail and instruct you bring your vehicle to a dealer to update the electric power control unit (EPCU) software. The dealer will also add additional ground wiring between the drive motor/gear assembly and frame.","mfr_campaign":"R0205 (11D138)","units":3236,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["IONIQ"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2021735"},{"source":"nhtsa","country":"us","campaign":"21V944000","date":"2021-12-07","manufacturer":"Hyundai Motor America","component":"ELECTRICAL SYSTEM:PROPULSION SYSTEM:CHARGING:MODULE:ONBOARD (OBCM); ELECTRICAL SYSTEM:SOFTWARE","summary":"Hyundai Motor America (Hyundai) is recalling certain 2017-2019 Ioniq electric vehicles.  An unstable electrical ground may cause the vehicle to enter a fail-safe mode with reduced acceleration and power.  In certain conditions while in fail-safe mode, the vehicle may accelerate after the gas pedal is released.","mfr_campaign":"215","units":2679,"do_not_drive":false,"park_outside":false,"notification":null,"match":"base","models":["IONIQ ELECTRIC"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/21V944000"},{"source":"nhtsa","country":"us","campaign":"19V720000","date":"2019-10-09","manufacturer":"Hyundai Motor America","component":"WHEELS:LUGS/NUTS/BOLTS/STUDS","summary":"Hyundai Motor America (Hyundai) is recalling certain 2019 Ioniq Hybrid and 2020 Elantra vehicles.  The right-side rear wheel lug nuts may have been insufficiently tightened, allowing the wheel to detach from the vehicle.","mfr_campaign":"184","units":48,"do_not_drive":false,"park_outside":false,"notification":null,"match":"base","models":["IONIQ HYBRID"],"built_from":"2019-07-03","built_to":"2019-07-23","url":"https://open.wenmarpro.com/recalls/nhtsa/19V720000"},{"source":"tc","country":"ca","campaign":"2019498","date":"2019-10-07","manufacturer":null,"component":"Wheels","summary":"Issue:\nOn certain cars, the wheel lug nuts were not properly tightened during assembly. This could cause the nuts to loosen or fall off, and could result in a wheel separating from the car. Note: For the Ioniq model, this recall only involves the Ioniq PHEV (Plug-In Hybrid Electric Vehicle) version.\n\nSafety Risk:\nA wheel separation could increase the risk of a crash. A wheel that detaches from a vehicle could create a hazard for other drivers and nearby people.\n\nCorrective Actions:\nThe company will notify owners by mail and instruct them to take their car to a dealer to ensure the front and rear wheel nuts are properly tightened.","mfr_campaign":"R0160 (91C061)","units":89,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["IONIQ"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2019498"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}