{"vehicle":{"id":"2018_ram_4500","year":2018,"make":"Ram","model":"4500"},"code":"P0340","generic":true,"description":null,"bulletins":{"as_of":"2026-10-19","count":2,"bulletins":[{"nhtsa_id":10149011,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-11-26","date":"2015-08-11","document_id":"68080819A","mfr_campaign":null,"component":"ENGINE","summary":"Camshaft Position Sensor If replacing a camshaft position sensor for P0340 and/or P0344 fault codes, please review information below and contact Andrew Action on his cell phone: (248) 421- 4130. If no response is received within 15 minutes, please continue with repair.~ Before clearing any codes please pull Freeze Frame and CamCrank Sync Event Monitor data (instructions below) from the PCM and send the PDF?s to Andrew Acton by email: andrew.acton@fcagroup.com~ Instructions to access CamCrank Sync Event Monitor:~ - From wiTECH main screen~ - Monitors tab~ - OBDII Monitors~ - Select Cam Crank Synchronization Event Monitor from the list~ - Should bring up 3 or 4 pages of data~ - Click on create PDF icon in lower right corner~ - email PDF to andrew.acton@fcagroup.com","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2015/MC-10149011-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2015/MC-10149011-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10149011"},{"nhtsa_id":10149004,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-11-26","date":"2015-08-04","document_id":"05149141A","mfr_campaign":null,"component":"ENGINE; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)","summary":"Camshaft Position Sensor If replacing a camshaft position sensor for P0340, P0344, P0345, P0349, P0365, P0369, P0390 or P0394 fault codes, please review information below and contact Tom Nies on his cell phone: (248) 494-0187. If no response is received within 15 minutes, please continue with repair. Before clearing any codes, please pull Freeze Frame and CamCrank Sync Event Monitor data (instructions below) from the PCM and send the PDF?s to Tom Nies by email: tom.nies@fcagroup.com~ Instructions to access Cam/Crank Sync Event Monitor: - From wiTECH main screen - Monitors tab - OBDII Monitors - Select Cam Crank Synchronization Event Monitor from the list - Should bring up 3 or 4 pages of data - Click on create PDF icon in lower right corner - email PDF to tom.nies@fcagroup.com","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2015/MC-10149004-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2015/MC-10149004-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10149004"}],"url":"https://open.wenmarpro.com/makes/ram/4500/2018/bulletins?code=P0340"},"related":{"components":[],"bulletins":[],"recalls":{"may_apply":true,"recalls":[],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null}}},"url":"https://open.wenmarpro.com/makes/ram/4500/2018/codes/P0340","note":"The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.","attribution":["Contains information licensed under the Open Government Licence – Canada."]}