{"vehicle":{"id":"2018_nissan_titan","year":2018,"make":"Nissan","model":"Titan"},"code":"P008A","generic":true,"description":null,"bulletins":{"as_of":"2026-10-19","count":2,"bulletins":[{"nhtsa_id":10153032,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-02-19","date":"2019-01-25","document_id":"NTB19-007","mfr_campaign":null,"component":"FUEL SYSTEM, DIESEL; ENGINE","summary":"2016-2019 TITAN XD DIESEL; FUEL FILTER MAINTENANCE This bulletin applies only to vehicles equipped with a Cummins 5.0L V8 diesel engine. SERVICE INFORMATION The Stage 1 and Stage 2 fuel filters must be replaced every 10,000 miles or a restriction may develop. DTCs P008A, P00C6, P0087 and/or a whining noise from the Stage 1 Fuel Filter Module may be present due to a restriction in the Stage 1 and/or Stage 2 fuel filters. NOTE: An inoperable or whining Stage 1 Fuel Filter Module that has not had the fuel filters regularly replaced as per the Owner?s Manual Maintenance schedule is not a warrantable repair. Before proceeding with any fuel system restriction diagnosis: - Confirm that both of the vehicle?s Stage 1 and Stage 2 fuel filters have been replaced at the correct service intervals, as per the Owner?s Manual Maintenance schedule. IMPORTANT: Warranty claim submissions for a Stage 1 Fuel Filter module will be denied if the Stage 1 and/or Stage 2 fuel filters have not been replaced per the Owner's Manual maintenance schedule.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153032-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153032-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10153032"},{"nhtsa_id":10133212,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-04-16","date":"2018-03-13","document_id":"NTB18-024","mfr_campaign":null,"component":"ENGINE AND ENGINE COOLING","summary":"2016-2018 TITAN XD; STAGE 1 AND STAGE 2 FUEL FILTER REPLACEMENT SERVICE INFORMATION When replacing the Stage 1 or Stage 2 fuel filters, it is important not to damage the new fuel filters, inner seals, or O-rings. Refer to the Service Procedure section of this bulletin or the Electronic Service Manual (ESM) ENGINE> FUEL SYSTEM> CUMMINS 5.0L> REMOVAL AND INSTALLATION to ensure the filters are being replaced correctly. P008A LOW FUEL PRESSURE CONTROL SYSTEM and/or a no start condition may occur if the procedure is not followed properly.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10133212-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10133212-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10133212"}],"url":"https://open.wenmarpro.com/makes/nissan/titan/2018/bulletins?code=P008A"},"related":{"components":[],"bulletins":[],"recalls":{"may_apply":true,"recalls":[],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null}}},"url":"https://open.wenmarpro.com/makes/nissan/titan/2018/codes/P008A","note":"The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.","attribution":["Contains information licensed under the Open Government Licence – Canada."]}