{"vehicle":{"id":"2018_nissan_sentra","year":2018,"make":"Nissan","model":"Sentra"},"code":"P17F0","generic":false,"description":null,"bulletins":{"as_of":"2026-10-19","count":2,"bulletins":[{"nhtsa_id":10176250,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2020-06-10","date":"2020-05-19","document_id":"NTB20-037","mfr_campaign":null,"component":"POWER TRAIN","summary":"2018-2019 SENTRA, VERSA SEDAN, AND VERSA NOTE; ENHANCED DIAGNOSTIC LOGIC FOR CVT IF YOU CONFIRM The customer reports a transmission judder (shake, shudder, single or multiple bumps or vibration), hesitation on acceleration, lack of power, or RPM flare. NOTE: • A new diagnostic logic has been established to enhance the diagnostic process by storing a diagnostic trouble code (DTC) on Applied Vehicles. • New DTCs: P17F0, P17F1, P17F2, P17F3, P17F4 will not turn the MIL ON. • New DTC P0868 will turn the MIL ON. • This new diagnostic logic will monitor conditions in the CVT while the customer is operating their vehicle in their usual daily drive patterns. • If any of the above DTCs are stored, refer to NTB20-035 (Sentra) or NTB20-036 (Versa Sedan and Versa Note) for repair information. ACTION 1. Confirm the current TCM part number. 2. Reprogram the TCM, if applicable","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2020/MC-10176250-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2020/MC-10176250-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10176250"},{"nhtsa_id":10152521,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-01-07","date":"2018-11-08","document_id":"NTB18-077","mfr_campaign":null,"component":"POWER TRAIN","summary":"MIL ON WITH DTC P0776, P1715 AND MAY HAVE HESITATION AND/OR LACK OF POWER This bulletin applies only to vehicles equipped with a CVT (Continuously Variable Transmission). IF YOU CONFIRM The MIL is ON with DTC P0776 (PC SOLENOID B ? Pressure Control Solenoid ?B? Performance/Stuck OFF) stored. NOTE: - If P0744, P0746, P0841, P0965, P2813, or P17F0 are stored this bulletin does not apply. Refer to ASIST for diagnostic assistance. - With this incident, if it should occur, P1715 (INPUT SPEED SENSOR) may be stored with DTC P0776. The vehicle may also hesitate and/or have reduced power. ACTION 1. Refer to the Repair Flow Chart on page 2 for mechanical CVT repair. 2. If needed, reprogram the TCM. - Refer to step 30 in the TCM Reprogram section (page 21) of the SERVICE PROCEDURE to confirm if reprogramming is needed. 3. Perform Additional Service (page 19).","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10152521-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10152521-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10152521"}],"url":"https://open.wenmarpro.com/makes/nissan/sentra/2018/bulletins?code=P17F0"},"related":{"components":[],"bulletins":[],"recalls":{"may_apply":true,"recalls":[],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null}}},"url":"https://open.wenmarpro.com/makes/nissan/sentra/2018/codes/P17F0","note":"The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.","attribution":["Contains information licensed under the Open Government Licence – Canada."]}