{"vehicle":{"id":"2018_infiniti_qx60","year":2018,"make":"Infiniti","model":"QX60"},"code":"P34A9","generic":true,"description":null,"bulletins":{"as_of":"2026-10-19","count":3,"bulletins":[{"nhtsa_id":10149805,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-12-03","date":"2018-10-24","document_id":"ITB18-009b","mfr_campaign":null,"component":"EQUIPMENT","summary":"2018 QX60; MIL ON WITH DTC P34A5 AND/OR P34A9 STORED This bulletin has been superseded. Please discard previous versions.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10149805-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10149805-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10149805"},{"nhtsa_id":10136210,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-05-07","date":"2018-03-13","document_id":"ITB18-009a","mfr_campaign":null,"component":"ELECTRICAL SYSTEM","summary":"2018 QX60; MIL ON WITH DTC P34A5 AND/OR P34A9 STORED This bulletin has been amended to correct the Applied Date. No other changes have been made. Please discard previous versions of this bulletin.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10136210-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10136210-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10136210"},{"nhtsa_id":10130486,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-03-26","date":"2018-02-27","document_id":"ITB18-009","mfr_campaign":null,"component":"EQUIPMENT; ELECTRICAL SYSTEM","summary":"2018 QX60; MIL ON WITH DTC P34A5 AND/OR P34A9 STORED IF YOU CONFIRM MIL is ON with one or both of the following DTCs: -P34A5 (A camshaft posi actuator temp sens B1) -P34A9 (A camshaft posi actuator temp sens B2) And Outside ambient temperature was near or below freezing (32°F) when the DTCs were stored. NOTE: If any VTC DTCs other than P34A5 and/or P34A9 are also stored (example: P0011, P0021), those DTCs should be diagnosed and resolved first. ACTION Replace the electric intake valve timing control module (see Figure 1 on Page 2). -Electric intake valve timing control module is listed in the Parts Information of this bulletin. -Refer to the Electronic Service Manual (ESM), section ENGINE > ENGINE CONTROL SYSTEM, for replacement information. -Make sure to perform Electric IVT Control Actuator Position Learning after replacement of the module.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10130486-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10130486-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10130486"}],"url":"https://open.wenmarpro.com/makes/infiniti/qx60/2018/bulletins?code=P34A9"},"related":{"components":[],"bulletins":[],"recalls":{"may_apply":true,"recalls":[],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null}}},"url":"https://open.wenmarpro.com/makes/infiniti/qx60/2018/codes/P34A9","note":"The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.","attribution":["Contains information licensed under the Open Government Licence – Canada."]}