{"vehicle":{"id":"2017_honda_cbr1000rr","year":2017,"make":"Honda","model":"CBR1000RR"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"nhtsa","country":"us","campaign":"24V864000","date":"2024-11-15","manufacturer":"Honda (American Honda Motor Co.)","component":"FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP","summary":"Honda (American Honda Motor Co.) is recalling certain 2007, 2009-2017 CBR600RR, 2008-2017, 2021 CBR1000RR, and 2010, 2012-2013 VFR1200 motorcycles.  The fuel pump impellers may have been improperly molded, which can cause them to deform and result in fuel pump failure.","mfr_campaign":"KR2, KR3, KR4, KR5","units":40481,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CBR1000RR"],"built_from":"2016-09-09","built_to":"2017-09-07","url":"https://open.wenmarpro.com/recalls/nhtsa/24V864000"},{"source":"tc","country":"ca","campaign":"2017527","date":"2017-10-26","manufacturer":null,"component":"Fuel System","summary":"On certain vehicles, the fuel cap could fail to seal against the filler neck. This could allow a small amount of fuel to leak into the drain tube during acceleration or deceleration if the fuel tank is full. A fuel leak, in the presence of an ignition source, could result in a fire. The improper seal could also allow water to enter the fuel tank, potentially affecting engine function and resulting in an engine stall. These issues could increase the risk of injury and/or damage to property. Correction: Dealers will replace the fuel tank cap.","mfr_campaign":"MK56","units":67,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"base","models":["CBR1000RR (FIREBLADE)"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2017527"},{"source":"nhtsa","country":"us","campaign":"17V681000","date":"2017-10-26","manufacturer":"Honda (American Honda Motor Co.)","component":"FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP","summary":"Honda (American Honda Motor Co.) is recalling certain 2017 Honda CBR1000RR and CBR1000RR SP motorcycles.  There may be a gap between the fuel tank cap seal and the fuel filler neck which can allow water to enter the fuel tank.","mfr_campaign":"KH7","units":2443,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CBR1000RR"],"built_from":"2016-11-22","built_to":"2017-05-31","url":"https://open.wenmarpro.com/recalls/nhtsa/17V681000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}