{"vehicle":{"id":"2016_mazda_cx-3","year":2016,"make":"Mazda","model":"CX-3"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2023391","date":"2023-07-14","manufacturer":null,"component":"Visual System","summary":"Issue:\nOn certain vehicles, a problem with the rearview camera connector could cause distortion or flickering of the rearview camera image.\nNote: This recall only affects hatchback (5-door) models.\n\nSafety Risk:\nA rearview camera image that doesn't display correctly could reduce a driver's ability to see behind the vehicle while backing up. This could increase the risk of a crash.\n\nCorrective Actions:\nMazda will notify owners by mail and advise you to take your vehicle to a dealership to inspect the rearview camera and install a seal for the wiring harness. The dealer will replace the rearview camera, if necessary.","mfr_campaign":"6023G","units":116779,"do_not_drive":null,"park_outside":null,"notification":"Safety TC","match":"exact","models":["CX-3"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2023391"},{"source":"nhtsa","country":"us","campaign":"23V487000","date":"2023-07-14","manufacturer":"Mazda North American Operations","component":"BACK OVER PREVENTION: SENSING SYSTEM: CAMERA","summary":"Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles.  The rearview camera image may not display properly by showing a flickering or distorted image.","mfr_campaign":"6023G","units":236100,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CX-3"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/23V487000"},{"source":"tc","country":"ca","campaign":"2016431","date":"2016-09-06","manufacturer":null,"component":"Structure","summary":"On certain vehicles, the anti-corrosion treatment of the outer tube of the rear lift gate stay may be insufficient. Over time, the outer tube of the rear lift gate stay may corrode and break off, which could increase the risk of injury. Correction: Dealers will replace both rear door stays.","mfr_campaign":"9916H","units":183808,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CX-3"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2016431"},{"source":"nhtsa","country":"us","campaign":"16V644000","date":"2016-09-06","manufacturer":"Mazda North American Operations","component":"STRUCTURE:BODY:HATCHBACK/LIFTGATE","summary":"Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015.  On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.","mfr_campaign":"9916H","units":580455,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CX-3"],"built_from":"2015-06-01","built_to":"2015-12-26","url":"https://open.wenmarpro.com/recalls/nhtsa/16V644000"},{"source":"nhtsa","country":"us","campaign":"16V203000","date":"2016-04-11","manufacturer":"Mazda North American Operations","component":"STEERING","summary":"Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015.  The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.","mfr_campaign":"9316D","units":578,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CX-3"],"built_from":"2015-06-01","built_to":"2015-12-02","url":"https://open.wenmarpro.com/recalls/nhtsa/16V203000"},{"source":"tc","country":"ca","campaign":"2016152","date":"2016-04-08","manufacturer":null,"component":"Suspension","summary":"On certain vehicles, the nut and bolt holding the strut assembly to the knuckle may not have been tightened properly during the manufacturing process. Over time, this could cause the strut assembly to separate from the knuckle, resulting in a loss of steering control which would increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will inspect and replace the nut and bolt holding the strut assembly to the knuckle if found loose.","mfr_campaign":"9613D","units":220,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CX-3"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2016152"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}