{"vehicle":{"id":"2016_ford_explorer","year":2016,"make":"Ford","model":"Explorer"},"code":"B1154","generic":false,"description":null,"bulletins":{"as_of":"2026-10-19","count":2,"bulletins":[{"nhtsa_id":10156883,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-04-08","date":"2019-02-19","document_id":"SSM 47814","mfr_campaign":null,"component":"SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER; SEATS; ELECTRICAL SYSTEM","summary":"Some 2016-2019 Explorer, 2016-2018 MKX, 2019 Edge/Nautilus, 2017-2019 Fusion/MKZ, and 2018-2019 F-150/Mustang/Expedition/Navigator vehicles equipped with climate controlled seats may exhibit a buzzing noise from the front seats, front seats too warm, and/or inoperative climate controlled front seats. DTCs B14BA:13, B1154:4B, and/or B14B9:13 may also be present. This may be due to loose terminal pin fit on the driver seat module (DSM) connector C341D (16 pin). If a loose terminal pin fit condition is found during normal diagnostics per Workshop Manual (WSM), Section 501-10, a new service pigtail connector (part number 3U2Z-14S411-BRAB) is available. Refer to Wiring Diagram, Cell 119 to make sure C341D is a 16 pin connector and not a 20 pin connector. Refer to Wiring Diagram, Cell 5 for the recommended splicing procedures.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10156883-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10156883-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10156883"},{"nhtsa_id":10155571,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-04-01","date":"2019-02-19","document_id":"SSM 47814","mfr_campaign":null,"component":"SEATS","summary":"Some 2016-2019 Explorer, 2016-2018 MKX, 2019 Edge/Nautilus, 2017-2019 Fusion/MKZ, and 2018-2019 F-150/Mustang/Expedition/Navigator vehicles equipped with climate controlled seats may exhibit a buzzing noise from the front seats, front seats too warm, and/or inoperative climate controlled front seats. DTCs B14BA:13, B1154:4B, and/or B14B9:13 may also be present. This may be due to loose terminal pin fit on the driver seat module (DSM) connector C341D (16 pin). If a loose terminal pin fit condition is found during normal diagnostics per Workshop Manual (WSM), Section 501-10, a new service pigtail connector (part number 3U2Z-14S411-BRAB) is available. Refer to Wiring Diagram, Cell 119 to make sure C341D is a 16 pin connector and not a 20 pin connector. Refer to Wiring Diagram, Cell 5 for the recommended splicing procedures.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10155571-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10155571-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10155571"}],"url":"https://open.wenmarpro.com/makes/ford/explorer/2016/bulletins?code=B1154"},"related":{"components":[],"bulletins":[],"recalls":{"may_apply":true,"recalls":[],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null}}},"url":"https://open.wenmarpro.com/makes/ford/explorer/2016/codes/B1154","note":"The bulletins listed name this code in NHTSA's summary, or are about the same components. A bulletin or a recall listed here may apply to the model year. None of it is a diagnosis.","attribution":["Contains information licensed under the Open Government Licence – Canada."]}