{"vehicle":{"id":"2015_yamaha_wr250r","year":2015,"make":"Yamaha","model":"WR250R"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"nhtsa","country":"us","campaign":"16V800000","date":"2016-11-03","manufacturer":"Yamaha Motor Corporation, USA","component":"POWER TRAIN:CLUTCH ASSEMBLY","summary":"Yamaha Motor Corporation , USA (Yamaha) is recalling certain model year 2014-2016 WR250R motorcycles manufactured August 1, 2013, to June 1, 2016.  Due to an incorrect assembly process, the clutch push lever oil seal may crack, allowing engine oil to leak out.","mfr_campaign":"990108","units":2550,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["WR250R"],"built_from":"2013-08-01","built_to":"2016-06-01","url":"https://open.wenmarpro.com/recalls/nhtsa/16V800000"},{"source":"tc","country":"ca","campaign":"2016537","date":"2016-10-31","manufacturer":null,"component":"Powertrain","summary":"On certain motorcycles, the clutch push lever oil seal may crack due to an incorrect assembly process. If that were to happen, engine oil could leak out, and could come into contact with the rear tire, potentially causing a loss of vehicle control, increasing the risk of a crash causing injury and/or damage to property. Correction: Dealers will replace the clutch push lever oil seal with a new seal.","mfr_campaign":"M16-103","units":623,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["WR250R"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2016537"},{"source":"nhtsa","country":"us","campaign":"15V410000","date":"2015-06-29","manufacturer":"Yamaha Motor Corporation, USA","component":"ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR","summary":"Yamaha Motor Corporation, USA (Yamaha) is recalling certain model year 2008-2011 WR250X motorcycles manufactured June 1, 2008, to June 1, 2011 and 2008-2015 WR250R motorcycles manufactured June 1, 2008, to June 1, 2015.  In the affected motorcycles, the insulation on the stator coil, a component of the alternator, may become damaged and short circuit to due insufficient heat resistance.","mfr_campaign":null,"units":12721,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["WR250R"],"built_from":"2008-06-01","built_to":"2015-06-01","url":"https://open.wenmarpro.com/recalls/nhtsa/15V410000"},{"source":"tc","country":"ca","campaign":"2015277","date":"2015-06-22","manufacturer":null,"component":"Electrical","summary":"On certain motorcycles, the stator coil insulation could become damaged and short circuit due to insufficient heat resistance.  This could decrease electrical output which could allow the battery to discharge.  This low battery voltage could result in a loss of speedometer function and could cause the engine to stall and unable to be restarted, which could increase the risk of a crash causing injury and/or property damage.  Correction: Dealers will replace the stator coil with a new one with sufficient heat resistance.","mfr_campaign":"M15-099","units":1815,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["WR250R"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2015277"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}