{"vehicle":{"id":"2014_bmw_x6","year":2014,"make":"BMW","model":"X6"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2024544","date":"2024-08-15","manufacturer":null,"component":"Label","summary":"Issue:\nOn certain vehicles, the tire and loading information label does not list that there is no spare tire in both official languages. The label reads as \"NONE\" when it should read as \"NONE / AUCUN\". Canadian regulations require the information to be listed on the label in both English and French.\n\nSafety Risk:\nThis error does not affect vehicle safety.\n\nCorrective Actions:\nThis is not a recall. The company has corrected the tire and loading information label for all new vehicles.","mfr_campaign":null,"units":587250,"do_not_drive":null,"park_outside":null,"notification":"Inconsequential","match":"exact","models":["X6"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2024544"},{"source":"tc","country":"ca","campaign":"2020008","date":"2020-01-15","manufacturer":null,"component":"Airbag","summary":"Issue:\nThis recall is for certain vehicles that had an airbag inflator replaced as a part of an earlier recall campaign. This recall provides a final repair.\n\nLong-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the driver-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.\n\nSafety Risk:\nIf the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.\n\nCorrective Actions:\nOwners will be notified by mail and instructed to take their vehicle to a dealer to inspect the driver-front airbag inflator. The driver-front airbag module or inflator will be replaced as necessary. Note: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.","mfr_campaign":"32 80 20RC / 32 81 20RC","units":47,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["X6"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2020008"},{"source":"nhtsa","country":"us","campaign":"20V017000","date":"2020-01-15","manufacturer":"BMW of North America, LLC","component":"AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE","summary":"BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i  xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls.  These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.","mfr_campaign":null,"units":59965,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["X6"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/20V017000"},{"source":"tc","country":"ca","campaign":"2019018","date":"2019-01-15","manufacturer":null,"component":"Airbag","summary":"Issue:\nOn certain vehicles, long-term exposure to high absolute humidity and temperature, combined with high temperature cycling, may eventually degrade the propellant contained in the passenger-front airbag. This could cause the airbag to deploy with more force than normal. If the airbag inflator ruptures, fragments could be propelled toward vehicle occupants or cause damage to the airbag assembly, preventing its proper function.\n\nSafety Risk:\nIf the vehicle is involved in a crash requiring an airbag deployment, the airbag inflator could rupture and create a risk of injury.\n\nCorrective Action:\nOwners will be notified by mail and instructed to take their vehicle to a dealer to have the passenger-front airbag module replaced.\nNote: The Canadian climate results in the propellant degrading slowly. This recall is being conducted as a precaution to address future risk. It is expected that all airbag inflators will be replaced before their function would be affected.","mfr_campaign":"72 80 19RC","units":20532,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["X6"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2019018"},{"source":"nhtsa","country":"us","campaign":"19V017000","date":"2019-01-14","manufacturer":"BMW of North America, LLC","component":"AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE","summary":"BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M vehicles, 2008-2014 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, 2009-2013 X5 xDrive35d vehicles and 2010-2011 X6 ActiveHybrid vehicles.  These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.","mfr_campaign":null,"units":83016,"do_not_drive":true,"park_outside":false,"notification":null,"match":"exact","models":["X6"],"built_from":"2008-02-05","built_to":"2014-06-25","url":"https://open.wenmarpro.com/recalls/nhtsa/19V017000"},{"source":"tc","country":"ca","campaign":"2017113","date":"2017-03-03","manufacturer":null,"component":"Powertrain","summary":"Certain vehicles may have been manufactured with defective front driveshaft universal joint seals, which could allow water and/or dirt to enter the universal joint, causing accelerated wear and/or corrosion, and resulting in vibration. If the vehicle continues to be operated in this state, the universal joint could eventually break, potentially damaging surrounding components and rendering the vehicle inoperative. This could increase the risk of a crash causing injury and/or damage to property. Correction : Dealers will replace the front drive shaft. Note: This is an expansion of recall 2016-226.","mfr_campaign":null,"units":12100,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["X6"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2017113"},{"source":"nhtsa","country":"us","campaign":"17V138000","date":"2017-03-02","manufacturer":"BMW of North America, LLC","component":"POWER TRAIN:DRIVELINE:DRIVESHAFT","summary":"BMW of North America, LLC, (BMW) is recalling certain 2011-2013 X5 xDrive35i, X5 xDrive50i, X5 M and X5 xDrive35d vehicles, 2011-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles, and 2011 x6 ActiveHybrid Vehicles.  Water and debris may enter the front driveshaft's universal joint, causing excessive wear and possibly resulting in the joint's failure.","mfr_campaign":null,"units":121909,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["X6"],"built_from":"2010-11-22","built_to":"2013-04-22","url":"https://open.wenmarpro.com/recalls/nhtsa/17V138000"},{"source":"tc","country":"ca","campaign":"2016142","date":"2016-03-31","manufacturer":null,"component":"Airbag","summary":"On certain vehicles, the driver frontal airbag inflator could produce excessive internal pressure during airbag deployment. Increased pressure may cause the inflator to rupture, which could allow fragments to be propelled toward vehicle occupants, increasing the risk of injury. This could also damage the airbag module, which could prevent proper deployment. Failure of the airbag to fully deploy during a crash (where deployment is warranted) could increase the risk of personal injury to the seat occupant. Correction: Dealers will replace the front driver air bag inflator or air bag module, depending on the vehicle model.","mfr_campaign":"72 80 16RC","units":104151,"do_not_drive":null,"park_outside":null,"notification":"Recalls Audit","match":"exact","models":["X6"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2016142"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}