{"vehicle":{"id":"2012_nissan_juke","year":2012,"make":"Nissan","model":"Juke"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2018121","date":"2018-03-08","manufacturer":null,"component":"Fuel System","summary":"On certain vehicles, the fuel pressure sensor may not have been tightened properly when the corrective measure of recall 2012-074 was performed. As a result, the fuel pressure sensor may loosen over time, which could cause a fuel leak. A fuel leak in the presence of an ignition source could result in a fire causing injury and/or damage to property. Correction: Dealers will inspect and retighten the fuel pressure sensor as necessary.","mfr_campaign":"PC618","units":6417,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["JUKE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2018121"},{"source":"nhtsa","country":"us","campaign":"18V156000","date":"2018-03-07","manufacturer":"Nissan North America, Inc.","component":"FUEL SYSTEM, GASOLINE","summary":"Nissan North America, Inc. (Nissan) is recalling certain 2011-2012 Nissan Juke vehicles previously remedied under recall 12V-069.  During that recall remedy, the fuel pressure sensor may not have been properly tightened, potentially causing the sensor to loosen and leak fuel.","mfr_campaign":null,"units":49385,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["JUKE"],"built_from":"2010-04-09","built_to":"2011-12-27","url":"https://open.wenmarpro.com/recalls/nhtsa/18V156000"},{"source":"tc","country":"ca","campaign":"2014539","date":"2014-11-28","manufacturer":null,"component":"Fuel System","summary":"On certain vehicles, the fuel pressure sensor connected to the engine fuel delivery rail may not have been sufficiently tightened during vehicle assembly.  Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and the rail.  Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury.  Correction: Dealers will inspect the pressure sensor and tighten to specification.  Note:  This is an expansion of recall 2012-074.  Vehicles that were repaired under the previous campaign are not affected because that remedy would have corrected the subject condition.","mfr_campaign":null,"units":10434,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["JUKE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2014539"},{"source":"nhtsa","country":"us","campaign":"14V683000","date":"2014-11-28","manufacturer":"Nissan North America, Inc.","component":"FUEL SYSTEM, GASOLINE","summary":"Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70 (V8 engine vehicles only), and QX80 vehicles.  The fuel pressure sensors may not have been sufficiently tightened during production.  As a result, the fuel pressure sensor may loosen with vehicle usage and cause a fuel leak.","mfr_campaign":null,"units":133592,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["JUKE"],"built_from":"2011-11-28","built_to":"2014-03-13","url":"https://open.wenmarpro.com/recalls/nhtsa/14V683000"},{"source":"tc","country":"ca","campaign":"2012211","date":"2012-07-12","manufacturer":null,"component":"Seats And Restraints","summary":"On certain vehicles, the rear seat latch strikers (which secure the seat backrest in the upright position) may have been manufactured incorrectly.  As a result, the rear seat back strikers may deform during a frontal vehicle crash, which could increase the risk of injury to a rear seat occupant.  Correction: Dealers will replace the rear seat latch strikers with updated versions.","mfr_campaign":"R1216","units":710,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["JUKE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2012211"},{"source":"nhtsa","country":"us","campaign":"12V328000","date":"2012-07-12","manufacturer":"NISSAN NORTH AMERICA, INC.","component":"SEATS","summary":"NISSAN IS RECALLING CERTAIN MODEL YEAR 2012 JUKE VEHICLES MANUFACTURED FROM FEBRUARY 3, 2012, THROUGH MAY 26, 2012.  DUE TO AN INCOMPLETE WELD PENETRATION, THE REAR SEAT BACK STRIKER MAY PARTIALLY SEPARATE IN A CRASH.","mfr_campaign":null,"units":11076,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["JUKE"],"built_from":"2012-02-03","built_to":"2012-05-26","url":"https://open.wenmarpro.com/recalls/nhtsa/12V328000"},{"source":"nhtsa","country":"us","campaign":"12V069000","date":"2012-02-24","manufacturer":"NISSAN NORTH AMERICA, INC.","component":"FUEL SYSTEM, GASOLINE","summary":"NISSAN IS RECALLING CERTAIN MODEL YEAR 2011-2012 JUKE, INFINITI QX AND INFINITI M VEHICLES.  THE FUEL PRESSURE SENSORS MAY NOT HAVE BEEN TIGHTENED TO THE CORRECT SPECIFICATION.  AS A RESULT, THE FUEL PRESSURE SENSOR MAY LOOSEN DUE TO HEAT AND VIBRATION CAUSING FUEL TO LEAK.","mfr_campaign":null,"units":79275,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["JUKE"],"built_from":"2010-03-08","built_to":"2011-12-27","url":"https://open.wenmarpro.com/recalls/nhtsa/12V069000"},{"source":"tc","country":"ca","campaign":"2012074","date":"2012-02-23","manufacturer":null,"component":"Fuel System","summary":"On certain vehicles, the fuel pressure sensor connected to the engine fuel delivery rail may not have been sufficiently tightened during vehicle assembly.  Should the pressure sensor loosen, fuel could leak past a gasket used in the connection between the sensor and rail.  Fuel leakage, in the presence of an ignition source, could result in a fire causing property damage and/or personal injury.  Correction: Dealers will inspect for fuel leakage from the pressure sensor and the fuel rail.  If there are no signs of a fuel leak, the fuel pressure sensor will be tightened to specifications.  If a fuel leak is confirmed, the gasket between the sensor and the fuel delivery rail will be replaced, and the sensor will be tightened.","mfr_campaign":"R194 / R195","units":7394,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["JUKE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2012074"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}