{"vehicle":{"id":"2011_porsche_911","year":2011,"make":"Porsche","model":"911"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2011293","date":"2011-08-12","manufacturer":null,"component":"Seats And Restraints","summary":"On certain vehicles, the seatbelt anchors were manufactured incorrectly and, as a result, may not rotate as designed.  Failure of the seatbelt anchorage to restrain the occupant as intended would increase the risk of personal injury during a crash.  Correction: Dealers will inspect and, if necessary, replace the seatbelt anchors.","mfr_campaign":null,"units":16,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"base","models":["911 GT3","911 SPEEDSTER"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2011293"},{"source":"nhtsa","country":"us","campaign":"11V409000","date":"2011-08-05","manufacturer":"PORSCHE CARS NORTH AMERICA, INC.","component":"SEAT BELTS","summary":"PORSCHE IS RECALLING CERTAIN MODEL YEAR 2011 911 SPEEDSTER AND 911 GTS RS 4.0; AND MODEL YEAR 2012 BOXSTER (INCLUDING S AND SPYDER); CAYMAN (INCLUDING S AND R); 911 CARRERA (INCLUDING S, GTS, 4, 4S, AND 4 GTS); 911 TARGA 4 AND TARGA 4S; AND 911 TURBO AND TURBO S MODELS MANUFACTURED FROM MAY 31, 2011, THROUGH JUNE 10, 2011.  THERE IS A POSSIBILITY THAT THE MOUNTING HOLES IN THE SEAT BELT ANCHOR PLATES FITTED TO THE VEHICLE ARE TOO SMALL.  IF THE HOLE DIAMETER IS TOO SMALL, THE ANCHOR PLATE MAY NOT BE ABLE TO ROTATE ABOUT THE FASTENING BOLT AS DESIGNED.","mfr_campaign":"AB02","units":235,"do_not_drive":false,"park_outside":false,"notification":null,"match":"base","models":["911 GT3 RS","911 SPEEDSTER"],"built_from":"2011-05-31","built_to":"2011-06-10","url":"https://open.wenmarpro.com/recalls/nhtsa/11V409000"},{"source":"nhtsa","country":"us","campaign":"11V285000","date":"2011-06-10","manufacturer":"PORSCHE CARS NORTH AMERICA, INC.","component":"WHEELS:LUGS/NUTS/BOLTS/STUDS","summary":"PORSCHE IS RECALLING CERTAIN MODEL YEAR 2010-2011, 911 TURBO; TURBO S, 911 GT3, GT3 RS AND GT2 RS HIGH PERFORMANCE VEHICLES, MANUFACTURED FROM MAY 18, 2009 THROUGH SEPTEMBER 17, 2010, AND EQUIPPED WITH CENTER LOCKING HUB AND WHEEL ASSEMBLIES.  OVER TIME THE HUBS CAN WEAR PREMATURELY.","mfr_campaign":"AB01","units":1702,"do_not_drive":false,"park_outside":false,"notification":null,"match":"base","models":["911 GT2 RS","911 GT3","911 GT3 RS","911 TURBO","911 TURBO S"],"built_from":"2009-05-18","built_to":"2010-09-17","url":"https://open.wenmarpro.com/recalls/nhtsa/11V285000"},{"source":"tc","country":"ca","campaign":"2011194","date":"2011-05-12","manufacturer":null,"component":"Wheels","summary":"On certain vehicles, the wheel retention system may fail.  A wheel separating from the vehicle could cause a loss of control and a crash.  In addition, the errant wheel assembly could strike a vehicle, property, or a bystander.  These issues could result in property damage and/or personal injury.  Correction: Dealers will replace the central wheel lock bolts.","mfr_campaign":null,"units":174,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"base","models":["911 GT2","911 GT3","911 TURBO"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2011194"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}