{"vehicle":{"id":"2008_toyota_sequoia","year":2008,"make":"Toyota","model":"Sequoia"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2021723","date":"2021-11-24","manufacturer":null,"component":"Electrical","summary":"Issue:\nThis recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships.\n\nOn certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt.\n\nNote: This recall only affects the following block heater/cord part numbers:\n\nC014003034                         PK5A408J09                         PU14000904\nC014003151                         PK5A408J13                         PU14000905\nC014000885                         PK5A489J11                         PU14000907\nC014000888                         PK5A489J22                         PU14000909\nC014000907                         PK5A410H00                        PU14000911\nC014100904                         PU14000900                         PU14000913\nC014100907                         PU14000901                         PU14003571\nC014100911                         PU14000902                         PK5A489J14\nPK5A408J05                        PU14000903\n\nSafety Risk:\nEngine block heater wiring that overheats or melts could create the risk of a fire.\n\nCorrective Actions:\nToyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.","mfr_campaign":"SRC XC8/XC9 / SRC RC8/RC9 / SRC RD1/RD2","units":55683,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["SEQUOIA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2021723"},{"source":"nhtsa","country":"us","campaign":"21V920000","date":"2021-11-23","manufacturer":"Toyota Motor Engineering & Manufacturing","component":"STEERING:HYDRAULIC POWER ASSIST SYSTEM; STEERING:RACK AND PINION","summary":"Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles.  The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.","mfr_campaign":"21TB10 / 21TA10","units":22462,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SEQUOIA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/21V920000"},{"source":"nhtsa","country":"us","campaign":"16V396000","date":"2016-06-02","manufacturer":"Southeast Toyota Distributors, LLC","component":"SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER","summary":"Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element.  The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.","mfr_campaign":"SET16B","units":7749,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SEQUOIA"],"built_from":"1987-12-05","built_to":"2012-01-27","url":"https://open.wenmarpro.com/recalls/nhtsa/16V396000"},{"source":"nhtsa","country":"us","campaign":"14V743000","date":"2014-11-19","manufacturer":"Southeast Toyota Distributors, LLC","component":"SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER","summary":"Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner.  The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.","mfr_campaign":null,"units":3233,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SEQUOIA"],"built_from":"2004-06-01","built_to":"2011-09-30","url":"https://open.wenmarpro.com/recalls/nhtsa/14V743000"},{"source":"tc","country":"ca","campaign":"2012338","date":"2012-10-10","manufacturer":null,"component":"Electrical","summary":"On certain vehicles, due to improperly applied grease, the driver's side power window master switch could stick or become inoperative. If attempts are made to lubricate the switch, the switch assembly could overheat and melt. A melting switch may produce smoke and potentially lead to a fire causing property damage and/or personal injury. Correction: Dealers will inspect the driver's power window master switch and apply a specialized grease that inhibits heat build-up, or replace the power window master switch circuit board, as necessary.","mfr_campaign":"177","units":239459,"do_not_drive":null,"park_outside":null,"notification":"Safety TC","match":"exact","models":["SEQUOIA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2012338"},{"source":"nhtsa","country":"us","campaign":"12V491000","date":"2012-10-10","manufacturer":"Toyota Motor Engineering & Manufacturing","component":"VISIBILITY:POWER WINDOW DEVICES AND CONTROLS","summary":"Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles.  The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies.  Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.","mfr_campaign":null,"units":2519424,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SEQUOIA"],"built_from":"2007-11-13","built_to":"2008-12-18","url":"https://open.wenmarpro.com/recalls/nhtsa/12V491000"},{"source":"nhtsa","country":"us","campaign":"11V148000","date":"2011-03-04","manufacturer":"TOYOTA MOTOR NORTH AMERICA, INC.","component":"TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS","summary":"TOYOTA IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 FJ CRUISER, LAND CRUISER, TACOMA, SEQUOIA AND TUNDRA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 138, \"TIRE PRESSURE MONITORING SYSTEM (TPMS).\" WHEN FACTORY-INSTALLED  WHEELS AND TIRES WERE REPLACED WITH TOYOTA AUTHORIZED ACCESSORY WHEELS AND LT TIRES PRIOR TO FIRST SALE,  THE TIRE PRESSURE MONITORING SYSTEMS WERE NOT RE-CALIBRATED CORRECTLY AND THEREFORE DO NOT START ILLUMINATING THE LOW TIRE PRESSURE WARNING TELLTALE AT THE REQUIRED MINIMUM ACTIVATION PRESSURE.","mfr_campaign":null,"units":22000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SEQUOIA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/11V148000"},{"source":"nhtsa","country":"us","campaign":"10V036000","date":"2010-02-03","manufacturer":"SOUTHEAST TOYOTA DISTRIBUTORS, LLC","component":"EQUIPMENT:OTHER:LABELS","summary":"SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2011 PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, \"TIRE SELECTION AND RIMS.\"  THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.","mfr_campaign":null,"units":153418,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SEQUOIA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/10V036000"},{"source":"nhtsa","country":"us","campaign":"10V035000","date":"2010-02-03","manufacturer":"GULF STATES TOYOTA, INC.","component":"EQUIPMENT:OTHER:LABELS","summary":"GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, \"TIRE SELECTION AND RIMS.\"  THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.","mfr_campaign":null,"units":271417,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SEQUOIA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/10V035000"},{"source":"tc","country":"ca","campaign":"2010012","date":"2010-01-22","manufacturer":null,"component":"Other","summary":"On certain vehicles, accelerator pedal movement may become rough, slow to return, or the pedal may stick in a depressed position.  This could result in a loss of throttle control and a vehicle crash, causing property damage, personal injury or death.  Correction: Dealers will install a steel reinforcement bar to the accelerator pedal assembly.  With this reinforcement in place, the excess friction that can cause the pedal to stick is eliminated.","mfr_campaign":"010","units":273050,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["SEQUOIA"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2010012"},{"source":"nhtsa","country":"us","campaign":"10V017000","date":"2010-01-21","manufacturer":"TOYOTA MOTOR NORTH AMERICA, INC.","component":"VEHICLE SPEED CONTROL:ACCELERATOR PEDAL","summary":"TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 AVALON, MODEL YEAR 2007-2010 CAMRY, MODEL YEAR 2009-2010 COROLLA, COROLLA MATRIX, RAV4, MODEL YEAR 2010 HIGHLANDER, MODEL YEAR 2008-2010 SEQUOIA, AND MODEL YEAR 2007-2010 TUNDRA VEHICLES.  DUE TO THE MANNER IN WHICH THE FRICTION LEVER INTERACTS WITH THE SLIDING SURFACE OF THE ACCELERATOR PEDAL INSIDE THE PEDAL SENSOR ASSEMBLY, THE SLIDING SURFACE OF THE LEVER MAY BECOME SMOOTH DURING VEHICLE OPERATION.  IN THIS CONDITION, IF CONDENSATION OCCURS ON THE SURFACE, AS MAY OCCUR FROM HEATER OPERATION (WITHOUT A/C) WHEN THE PEDAL ASSEMBLY IS COLD, THE FRICTION WHEN THE ACCELERATOR PEDAL IS OPERATED MAY INCREASE, WHICH MAY RESULT IN THE ACCELERATOR PEDAL BECOMING HARDER TO DEPRESS, SLOWER TO RETURN, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION.","mfr_campaign":"AOA","units":2230661,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SEQUOIA"],"built_from":"2007-11-14","built_to":"2010-01-26","url":"https://open.wenmarpro.com/recalls/nhtsa/10V017000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}