{"vehicle":{"id":"2007_international_9200i","year":2007,"make":"International","model":"9200i"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2023293","date":"2023-05-18","manufacturer":null,"component":"Lights And Instruments","summary":"Issue:\nOn certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulations.\nNote: This recall only affects trucks equipped with a pintle hook lowering bracket and feature code 01WPN, 01 WPS, or 01VAL.\n\nSafety Risk:\nBackup lamps that aren't visible could cause a person not to recognize that the vehicle is backing and increase the risk of a crash.\n\nCorrective Actions:\nNavistar will notify owners by mail and instruct you to take your truck to a dealership to install new tail stop/turn signal lamps with integrated backup lamps.","mfr_campaign":"23514","units":1764,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["9200I"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2023293"},{"source":"nhtsa","country":"us","campaign":"23V353000","date":"2023-05-18","manufacturer":"Navistar, Inc.","component":"EXTERIOR LIGHTING:BACK UP LIGHTS","summary":"Navistar, Inc. (Navistar) is recalling certain 2000-2003 International 8100, 2001-2003 International 9100i, 2001-2007 International 9400i, 2001-2010 International 9200i, 2002-2007, 2009 International 8500, 2003-2007, 2013 International 9900i, 2003-2018 International 8600, 2004, 2007 International 9900iX, 2008-2018 International ProStar, 2010-2011, 2013, 2016 International LoneStar, 2011-2012, 2016 International 4400, 2017-2024 International LT, 2018-2024 International RH, 2019-2021 International LS, 2019-2024 International MV vehicles.  The back-up lights offer low visibility when the vehicle is in reverse and bobtail mode.  Also, the vehicles have not been equipped with additional unobstructed back-up lights.  As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, \"Lamps, Reflective Devices, and Associated Equipment.\"","mfr_campaign":"23514","units":32880,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["9200I"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/23V353000"},{"source":"nhtsa","country":"us","campaign":"09V386000","date":"2009-10-05","manufacturer":"NAVISTAR, INC","component":"ENGINE AND ENGINE COOLING","summary":"NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2008 HEAVY TRUCKS MANUFACTURED BETWEEN APRIL 1, 2003 AND DECEMBER 21, 2007, EQUIPPED WITH CATERPILLAR C15 ENGINES.  THE VARIABLE VALVE ACTUATION (VVA) OIL LINE MAY WEAR AGAINST THE P-CLIPS RETAINING THE OIL LINE, CAUSING AN OIL LEAK.","mfr_campaign":null,"units":9527,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["9200I"],"built_from":"2003-04-01","built_to":"2007-12-21","url":"https://open.wenmarpro.com/recalls/nhtsa/09V386000"},{"source":"tc","country":"ca","campaign":"2007313","date":"2007-09-27","manufacturer":null,"component":"Engine","summary":"On certain trucks equipped with a Cummins ISM CM876 engine, the Electronic Control Module (ECM) fails to recognize inputs of the vehicle Electronic Control Unit (ECU) or from a driver actuated dash switch thereby increasing the risk of unintended (or unexpected) elevated exhaust temperatures.  While this condition does not involve a risk of fire in the vehicle itself, it could present a fire hazard in a situation where the vehicle's exhaust is in close proximity to materials or substances that can melt, burn or explode.  Correction: Dealers will install updated ECM software.","mfr_campaign":"07512","units":12,"do_not_drive":null,"park_outside":null,"notification":"Recalls Audit","match":"base","models":["9200I 6X4"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2007313"},{"source":"nhtsa","country":"us","campaign":"07V374000","date":"2007-08-22","manufacturer":"INTERNATIONAL TRUCK & ENGINE CORPORATION","component":"ENGINE AND ENGINE COOLING:ENGINE:DIESEL","summary":"ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS BUILT WITH CUMMINS ISM C876 ENGINES, THE ELECTRONIC CONTROL MODULE FAILS TO RECOGNIZE INPUTS OF THE VEHICLE ELECTRONIC CONTROL UNIT OR FROM A DRIVER ACTUATED DASH SWITCH THEREBY INCREASING THE RISK OF UNINTENDED (OR UNEXPECTED) ELEVATED EXHAUST TEMPERATURES.","mfr_campaign":"07512","units":49,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["9200I"],"built_from":"2006-05-15","built_to":"2007-04-02","url":"https://open.wenmarpro.com/recalls/nhtsa/07V374000"},{"source":"nhtsa","country":"us","campaign":"07V227000","date":"2007-06-05","manufacturer":"INTERNATIONAL TRUCK & ENGINE CORPORATION","component":"ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR","summary":"ON CERTAIN TRUCKS, THE DIESEL ENGINE/GENERATOR UNIT CAN BE STARTED REMOTELY BY A PERSON IN THE TRUCK CAB WHILE ITS PROTECTIVE COVER IS REMOVED; AND UNDER CERTAIN CONDITIONS THE ENGINE MAY RE-START AFTER THE EMERGENCY FUEL CUTOFF IS USED TO SHUT DOWN THE UNIT.","mfr_campaign":"07507","units":12,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["9200I"],"built_from":"2006-07-20","built_to":"2007-03-19","url":"https://open.wenmarpro.com/recalls/nhtsa/07V227000"},{"source":"tc","country":"ca","campaign":"2007159","date":"2007-05-18","manufacturer":null,"component":"Other","summary":"On certain trucks, the diesel engine/generator unit can be started remotely by a person in the truck cab while its protective cover is removed; and under certain conditions the engine may re-start after the emergency fuel cutoff is used to shut down the unit.  An unexpected starting of the diesel engine/generator unit, when the protective cover is removed and maintenance is being performed, may result in personal injury.  Correction: Dealers will replace the auxiliary power systems electronic control unit with an updated version.","mfr_campaign":"07507","units":7,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"base","models":["9200I 6X4"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2007159"},{"source":"nhtsa","country":"us","campaign":"07V180000","date":"2007-04-24","manufacturer":"INTERNATIONAL TRUCK & ENGINE CORPORATION","component":"FUEL SYSTEM, DIESEL","summary":"ON CERTAIN TRUCKS EQUIPPED WITH DAVCO FUEL PRO 382 HEATED FUEL FILTERS, WHEN THE KEY IS IN THE 'ON' POSITION, THE PRE-HEATER, LOCATED IN THE FUEL FILTER BASE, IS ENERGIZED.","mfr_campaign":"07506","units":700,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["9200I"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/07V180000"},{"source":"nhtsa","country":"us","campaign":"07V179000","date":"2007-04-24","manufacturer":"INTERNATIONAL TRUCK & ENGINE CORPORATION","component":"SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY","summary":"ON CERTAIN TRUCKS, ONE OR BOTH REAR AXLE HOUSINGS MAY CONTAIN THINNER MATERIAL THAN WHAT IS NECESSARY FOR NORMAL VEHICLE OPERATION.  OVER TIME, THIS THINNER MATERIAL MAY RESULT IN A FATIGUE FAILURE OF THE REAR AXLE HOUSING, POSSIBLY IN THE LOCATION OF THE BRAKE FLANGE.","mfr_campaign":"07505","units":1172,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["9200I"],"built_from":"2006-11-15","built_to":"2007-02-19","url":"https://open.wenmarpro.com/recalls/nhtsa/07V179000"},{"source":"tc","country":"ca","campaign":"2007126","date":"2007-04-20","manufacturer":null,"component":"Fuel System","summary":"On certain trucks, when the ignition key is in the 'ON' position, the pre-heater, located in the fuel filter base, is energized.  If this pre-heater is energized while maintenance is being performed on the fuel filter, diesel fuel could ignite within the filter housing.  A fire within the fuel filter housing may spread possibly resulting in property damage or personal injury.  Correction: Dealers will inspect and, if required, replace the fuel heater assembly.","mfr_campaign":"07506","units":8,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"base","models":["9200I 4X2"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2007126"},{"source":"tc","country":"ca","campaign":"2007016","date":"2007-01-22","manufacturer":null,"component":"Electrical","summary":"On certain trucks, the positive battery cables, that supply power from the batteries to the starter, may rub against an electrical ground cable between the engine and the starter, and electrical ground cable between the frame rail and the starter, or the frame rail itself.  This rubbing may cause an electrical short and/or fire, which can result in property damage, personal injury, or death.  Correction: Dealers will re-route the battery cables using new bracketry.","mfr_campaign":"07501","units":4957,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"base","models":["9200I 4X2","9200I 6X4"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2007016"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}