{"vehicle":{"id":"2005_gmc_yukon","year":2005,"make":"GMC","model":"Yukon"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2011074","date":"2011-02-21","manufacturer":null,"component":"Heater And Defroster","summary":"On certain vehicles, the interface between the electrical terminals of the Heating, Ventilation, and Air Conditioning (HVAC) blower relay resistor module and the wiring connector (which powers the module) may be incapable of conducting higher current levels for sustained periods of operation.  In addition, moisture and other contaminants (such as road de-icing materials) may enter the fresh air intake plenum and contact the internal circuit of the module or corrode the terminals.  These conditions may cause the relay resistor module or wiring connector to overheat, causing various symptoms such as: the HVAC blower may not function on certain or all blower speed settings; a burning-plastic smell or smoke may be present in the vehicle, or; the HVAC blower may run continually with the ignition in the OFF position.  These warning signs could, in certain instances, be leading indicators of an impending vehicle fire, which could result in property damage and/or personal injury.  Correction: Owners will be provided with additional warranty coverage for the blower motor resistor module/wiring connector overheating condition.  Under this \"special warranty coverage\", should this condition occur within 10 years or 240,000 km from first vehicle registration, dealers will install a replacement blower motor resistor and resistor module connector.","mfr_campaign":"11046","units":190310,"do_not_drive":null,"park_outside":null,"notification":"Safety TC","match":"exact","models":["YUKON"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2011074"},{"source":"tc","country":"ca","campaign":"2005119","date":"2005-04-25","manufacturer":null,"component":"Seats And Restraints","summary":"On certain vehicles, the 2nd row centre occupant seat belt routing may make it difficult to position the lap portion of the safety belt low around the hips of occupants.  A lap portion of the seat belt routing that is not low and snug on the hips can allow unfavourable occupant kinetics in the event of a crash.  Moreover, the higher routing allows the lap belt to ride up on an occupant's abdomen instead of fitting low around their hipbones, and therefore, can expose them to more risk of abdominal and internal organ injury.  Correction: Dealers will modify the guide loop.","mfr_campaign":"05037","units":73473,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["YUKON"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2005119"},{"source":"nhtsa","country":"us","campaign":"05V163000","date":"2005-04-22","manufacturer":"GENERAL MOTORS CORP.","component":"SEAT BELTS:REAR/OTHER","summary":"ON CERTAIN CREW CAB PICKUP TRUCKS AND SPORT UTILITY VEHICLES, THE 2ND ROW CENTER OCCUPANT SEAT BELT ROUTING MAY MAKE IT DIFFICULT TO POSITION THE LAP PORTION OF THE SAFETY BELT LOW AROUND THE HIPS OF OCCUPANTS, ESPECIALLY SMALLER OCCUPANTS, SEATED IN THIS POSITION.   APPROPRIATE USE OF A CHILD SEAT OR BOOSTER SEAT, AS RECOMMENDED FOR SMALL CHILDREN, DOES IMPROVE THE FIT CONDITION FOR THIS USER GROUP.  IN ADDITION TO INSTRUCTIONS ON PROPER INFANT AND YOUNG CHILD RESTRAINT (WITH CHILD SEATS OR BOOSTERS), SPECIAL VERBIAGE FOR RESTRAINING OLDER CHILD IS INCLUDED IN THE OWNER'S MANUAL.  ALSO, THE SUGGESTED SEAT BELT FIT/ROUTING FOR ADULTS, IRRESPECTIVE OF SEATING POSITION, IS DESCRIBED IN THE OWNER'S MANUAL TEXT.","mfr_campaign":"05037","units":1359824,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["YUKON"],"built_from":"2004-02-24","built_to":"2004-11-02","url":"https://open.wenmarpro.com/recalls/nhtsa/05V163000"},{"source":"nhtsa","country":"us","campaign":"05V103000","date":"2005-03-18","manufacturer":"GENERAL MOTORS CORP.","component":"SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES","summary":"ON CERTAIN SPORT UTILITY VEHICLES, THE BRAKE PEDAL PUSHROD RETAINER MAY BE MISSING.  IF THE RETAINER IS MISSING, THE BRAKE BOOSTER PUSHROD COULD DISENGAGE FROM THE BRAKE PEDAL.","mfr_campaign":"05039","units":707,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["YUKON"],"built_from":"2004-02-01","built_to":"2005-03-10","url":"https://open.wenmarpro.com/recalls/nhtsa/05V103000"},{"source":"tc","country":"ca","campaign":"2005038","date":"2005-02-15","manufacturer":null,"component":"Lights And Instruments","summary":"Certain vehicles equipped with an automatic transmission fail to comply with the requirements of CMVSS 101 - Location, identification and illumination of displays.  Under certain vehicle starting conditions, the shift lever position indicator located in the instrument panel cluster may not illuminate.  In subsequent vehicle start-ups, this condition may or may not occur again.  If the shift lever position indicator does not illuminate, the driver may not know which gear the vehicle is in and the vehicle may move in an unintended direction, resulting in possible injury to others outside of the vehicle.  Correction:  Dealers will reprogram the instrument panel cluster.","mfr_campaign":"05023","units":260,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["YUKON"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2005038"},{"source":"nhtsa","country":"us","campaign":"05V055000","date":"2005-02-14","manufacturer":"GENERAL MOTORS CORP.","component":"POWER TRAIN:MANUAL TRANSMISSION:SHIFT PATTERN INDICATOR","summary":"CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH AN AUTOMATIC TRANSMISSION, FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 102, \"TRANSMISSION SHIFT LEVER SEQUENCE, STARTER INTERLOCK AND TRANSMISSION BRAKING EFFECT.\"  UNDER CERTAIN VEHICLE STARTING CONDITIONS, THE SHIFT LEVER POSITION INDICATOR LOCATED IN THE INSTRUMENT PANEL CLUSTER MAY NOT ILLUMINATE.  IF THE SHIFT LEVER POSITION INDICATOR DOES NOT ILLUMINATE, THE DRIVER MAY NOT KNOW WHICH GEAR THE VEHICLE IS IN.","mfr_campaign":"05023","units":7194,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["YUKON"],"built_from":"2005-01-01","built_to":"2005-02-28","url":"https://open.wenmarpro.com/recalls/nhtsa/05V055000"},{"source":"tc","country":"ca","campaign":"2004281","date":"2004-08-05","manufacturer":null,"component":"Fuel System","summary":"On certain vehicles, the fuel rail crossover tube retainer screws were not manufactured to specifications and may break.  If a tube retainer screw breaks, fuel could leak from the fuel rail crossover joint, the engine may stall and, if an ignition source were present, an engine compartment fire could occur.  Correction:  Dealers will inspect the fuel rail crossover tube assembly and, if necessary, replace the two tube retainer screws.","mfr_campaign":"04066","units":63,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["YUKON"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2004281"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}