{"vehicle":{"id":"2004_toyota_camry","year":2004,"make":"Toyota","model":"Camry"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2021723","date":"2021-11-24","manufacturer":null,"component":"Electrical","summary":"Issue:\nThis recall is for certain block heater kits installed on certain vehicles or sold as accessories at Toyota or Lexus dealerships.\n\nOn certain vehicles, the engine block heater cable may not have enough heat protection and could be damaged by high temperatures. If this happens, the cable could short circuit while plugged in, and cause the wiring to overheat or melt.\n\nNote: This recall only affects the following block heater/cord part numbers:\n\nC014003034                         PK5A408J09                         PU14000904\nC014003151                         PK5A408J13                         PU14000905\nC014000885                         PK5A489J11                         PU14000907\nC014000888                         PK5A489J22                         PU14000909\nC014000907                         PK5A410H00                        PU14000911\nC014100904                         PU14000900                         PU14000913\nC014100907                         PU14000901                         PU14003571\nC014100911                         PU14000902                         PK5A489J14\nPK5A408J05                        PU14000903\n\nSafety Risk:\nEngine block heater wiring that overheats or melts could create the risk of a fire.\n\nCorrective Actions:\nToyota recommends that you should stop using the engine block heater immediately. Toyota will notify owners by mail and instruct you to take your vehicle to a dealer to disable the engine block heater. For some vehicles, the corrective actions for this recall are under development. For others, a new engine block heater cannot be installed, and the owner will receive a refund of the purchase price of the engine block heater.","mfr_campaign":"SRC XC8/XC9 / SRC RC8/RC9 / SRC RD1/RD2","units":55683,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CAMRY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2021723"},{"source":"tc","country":"ca","campaign":"2011397","date":"2011-11-09","manufacturer":null,"component":"Steering","summary":"On certain vehicles equipped with a 1MZ-FE or 3MZ-FE V6 engine, the crankshaft pulley may fail.  The outer ring may become misaligned, or it may not properly rotate, causing noise and/or illumination of the discharge warning light.  In addition, the power steering belt may become detached from the crankshaft pulley, which could result in a sudden increase in steering effort.  A loss of steering power assist could result in a crash causing property damage and/or personal injury.  Correction: Dealers will inspect and, if necessary, replace the crankshaft pulley.","mfr_campaign":"SSC 152 / SSC 153","units":23003,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CAMRY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2011397"},{"source":"nhtsa","country":"us","campaign":"11V539000","date":"2011-11-09","manufacturer":"Toyota Motor Engineering & Manufacturing","component":"ENGINE AND ENGINE COOLING","summary":"TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004 AVALON VEHICLES; 2004 AND 2005 CAMRY, CAMRY SOLARA, HIGHLANDER, AND SIENNA VEHICLES, 2006 HIGHLANDER HYBRID; 2004 AND 2005 LEXUS ES330 AND RX330; AND 2006 LEXUS RX400H VEHICLES MANUFACTURED FROM JUNE 1, 2004 THROUGH MARCH 31, 2005, EQUIPPED WITH THE 1MZ-FE OR 3MZ-FE ENGINE.  THE AMOUNT OF ADHESIVE AGENT APPLIED BETWEEN THE OUTER RING AND THE TORSIONAL RUBBER DAMPER (INNER RING) IN THE CRANKSHAFT PULLEY MAY BE INADEQUATE.  IF THE ADHESIVE IS INSUFFICIENT, THERE IS A POSSIBILITY THAT THE OUTER RING MAY BECOME MISALIGNED AND IT MAY NOT PROPERLY ROTATE WITH THE INNER RING, CAUSING NOISE AND/OR ILLUMINATION OF THE BATTERY DISCHARGE INDICATOR LIGHT.","mfr_campaign":null,"units":420326,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CAMRY"],"built_from":"2004-06-01","built_to":"2004-03-31","url":"https://open.wenmarpro.com/recalls/nhtsa/11V539000"},{"source":"nhtsa","country":"us","campaign":"04V595000","date":"2004-12-15","manufacturer":"TOYOTA MOTOR NORTH AMERICA, INC.","component":"SEAT BELTS:FRONT:BUCKLE ASSEMBLY","summary":"ON CERTAIN PASSENGER VEHICLES EQUIPPED  WITH A FRONT PASSENGER POWER SEAT, WHEN INSTALLING CERTAIN REAR-FACING INFANT CHILD SEAT BASES ONTO THE SEAT WITH AN EXCESSIVELY HIGH SEATBELT TENSION, IT MAY BE POSSIBLE TO UNSEAT A COMPONENT CALLED THE BUCKLE STATUS SWITCH FROM THE SEAT BELT BUCKLE.","mfr_campaign":"SSC 40M","units":150061,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CAMRY"],"built_from":"2003-05-07","built_to":"2004-09-08","url":"https://open.wenmarpro.com/recalls/nhtsa/04V595000"},{"source":"nhtsa","country":"us","campaign":"04V346000","date":"2004-07-13","manufacturer":"TOYOTA MOTOR NORTH AMERICA, INC.","component":"AIR BAGS:SIDE/WINDOW","summary":"ON CERTAIN VEHICLES EQUIPPED WITH  CURTAIN SHIELD AIR BAGS (CSA), ONE OR BOTH OF THE CURTAIN AIR BAGS MAY BE TWISTED NEAR THE INFLATOR DUE TO IMPROPER ASSEMBLY.","mfr_campaign":null,"units":128316,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CAMRY"],"built_from":"2001-10-22","built_to":"2004-02-10","url":"https://open.wenmarpro.com/recalls/nhtsa/04V346000"},{"source":"tc","country":"ca","campaign":"2004240","date":"2004-07-12","manufacturer":null,"component":"Airbag","summary":"On certain vehicles equipped with the Curtain Shield airbag system, the curtain airbag may be twisted near the inflator due to improper assembly.  In this condition, the gas supplied by the inflator may be inadequate for proper inflation of the bag, causing incomplete inflation of the curtain in the event of a collision.  Correction:  Dealers will inspect, and replace the curtain airbag if necessary.","mfr_campaign":"410","units":1112,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CAMRY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2004240"},{"source":"tc","country":"ca","campaign":"2004042","date":"2004-01-30","manufacturer":null,"component":"Label","summary":"On certain vehicles, the compliance label does not meet the requirements of CMVSS 120.  The label was printed with incorrect Gross Vehicle Weight Rating and Gross Axle Weight Rating data.  The incorrect GVWR / GAWR data is 2,380 kg / 1,300 kg.  The correct GVWR is 1,900-2,015 kg and the GAWR is 1,035-1,210 kg.  Correction:  Dealer will replace the compliance label.","mfr_campaign":"401","units":2943,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["CAMRY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2004042"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}