{"vehicle":{"id":"2004_mack_cl","year":2004,"make":"Mack","model":"CL"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"nhtsa","country":"us","campaign":"10V069000","date":"2010-03-03","manufacturer":"MACK TRUCKS, INC","component":"POWER TRAIN:AXLE ASSEMBLY","summary":"MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2002 THROUGH 2004 CL, CV, LE, MR, RB, RD, AND MODEL YEAR 2003 THROUGH 2004 DM HEAVY TRUCKS MANUFACTURED FROM FEBRUARY 1, 2002 THROUGH SEPTEMBER 30, 2003, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE.  THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS.","mfr_campaign":"SC0341","units":15490,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CL"],"built_from":"2002-02-01","built_to":"2003-09-30","url":"https://open.wenmarpro.com/recalls/nhtsa/10V069000"},{"source":"tc","country":"ca","campaign":"2009199","date":"2009-07-07","manufacturer":null,"component":"Suspension","summary":"On certain vehicles, the front axle beam may not have been manufactured correctly.  Transverse shear lines on the bottom of the axle could allow cracks to form which, over time, may cause the axle beam to fail.  This could result in a vehicle crash causing property damage, personal injury or death.  Correction: Dealers will inspect and, if required, replace the axle beam.","mfr_campaign":"SC0341","units":1952,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CL"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2009199"},{"source":"nhtsa","country":"us","campaign":"09V240000","date":"2009-06-30","manufacturer":"MACK TRUCKS, INC","component":"POWER TRAIN:AXLE ASSEMBLY","summary":"MACK IS RECALLING 10,300 MODEL YEAR 2004 AND 2005 CL, CV, DM, LE, AND RB AND MODEL YEAR 2004 RD HEAVY TRUCKS MANUFACTURED FROM OCTOBER 1, 2003 THROUGH SEPTEMBER 30, 2004, EQUIPPED WITH AXLE BEAMS MANUFACTURED BY BHARAT FORGE.  THE AXLE BEAM MAY HAVE TRANSVERSE SHEAR LINES ON THE BOTTOM OF THE AXLE FROM THE TRIMMING PROCESS.","mfr_campaign":"SC0341","units":10300,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CL"],"built_from":"2003-10-01","built_to":"2004-09-30","url":"https://open.wenmarpro.com/recalls/nhtsa/09V240000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}