{"vehicle":{"id":"2004_international_8500","year":2004,"make":"International","model":"8500"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2023293","date":"2023-05-18","manufacturer":null,"component":"Lights And Instruments","summary":"Issue:\nOn certain trucks, the backup lamps could be blocked and may not be visible. As a result, the trucks don't meet the requirements of the Canadian regulations.\nNote: This recall only affects trucks equipped with a pintle hook lowering bracket and feature code 01WPN, 01 WPS, or 01VAL.\n\nSafety Risk:\nBackup lamps that aren't visible could cause a person not to recognize that the vehicle is backing and increase the risk of a crash.\n\nCorrective Actions:\nNavistar will notify owners by mail and instruct you to take your truck to a dealership to install new tail stop/turn signal lamps with integrated backup lamps.","mfr_campaign":"23514","units":1764,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["8500"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2023293"},{"source":"nhtsa","country":"us","campaign":"23V353000","date":"2023-05-18","manufacturer":"Navistar, Inc.","component":"EXTERIOR LIGHTING:BACK UP LIGHTS","summary":"Navistar, Inc. (Navistar) is recalling certain 2000-2003 International 8100, 2001-2003 International 9100i, 2001-2007 International 9400i, 2001-2010 International 9200i, 2002-2007, 2009 International 8500, 2003-2007, 2013 International 9900i, 2003-2018 International 8600, 2004, 2007 International 9900iX, 2008-2018 International ProStar, 2010-2011, 2013, 2016 International LoneStar, 2011-2012, 2016 International 4400, 2017-2024 International LT, 2018-2024 International RH, 2019-2021 International LS, 2019-2024 International MV vehicles.  The back-up lights offer low visibility when the vehicle is in reverse and bobtail mode.  Also, the vehicles have not been equipped with additional unobstructed back-up lights.  As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, \"Lamps, Reflective Devices, and Associated Equipment.\"","mfr_campaign":"23514","units":32880,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["8500"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/23V353000"},{"source":"tc","country":"ca","campaign":"2005128","date":"2005-04-29","manufacturer":null,"component":"Other","summary":"On certain vehicles, the electrically controlled Modular Solenoid Valve Assembly (MSVA) 7-pack can allow water to contaminate its circuit board possibly resulting in inadvertent operation of the fifth wheel slide control.  If the fifth wheel slide control actuates while the vehicle is in transit, momentum from the trailer can cause the fifth wheel to slide without input from the driver, which may result in a vehicle crash without warning possibly resulting in property damage, personal injury or death.  Correction: Dealers will replace the 7-pack base and solenoids.","mfr_campaign":"05511","units":629,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"base","models":["8500 4X2","8500 6X4"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2005128"},{"source":"nhtsa","country":"us","campaign":"05V188000","date":"2005-04-28","manufacturer":"INTERNATIONAL TRUCK & ENGINE CORPORATION","component":"TRAILER HITCHES:FIFTH WHEEL ASSEMBLY","summary":"ON CERTAIN VEHICLES EQUIPPED WITH AIR OPERATED FIFTH WHEEL SLIDES AND AN MSVA 7-PACK ACCESSORY CONTROLLER, THE 7-PACK CAN ALLOW WATER TO CONTAMINATE ITS CIRCUIT BOARD.  THIS COULD RESULT IN INADVERTENT OPERATION OF THE FIFTH WHEEL SLIDE CONTROL.","mfr_campaign":"05511","units":4616,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["8500"],"built_from":"2001-10-10","built_to":"2005-03-21","url":"https://open.wenmarpro.com/recalls/nhtsa/05V188000"},{"source":"nhtsa","country":"us","campaign":"04V569000","date":"2004-12-03","manufacturer":"INTERNATIONAL TRUCK & ENGINE CORPORATION","component":"STRUCTURE","summary":"ON CERTAIN TRUCKS, THE BOLTS THAT MOUNT THE FRONT OF THE CAB TO THE MOUNTING BRACKETS WERE NOT PROPERLY TORQUED AT THE MANUFACTURING PLANT.","mfr_campaign":"05502","units":17443,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["8500"],"built_from":"2004-01-16","built_to":"2004-11-01","url":"https://open.wenmarpro.com/recalls/nhtsa/04V569000"},{"source":"tc","country":"ca","campaign":"2004413","date":"2004-11-24","manufacturer":null,"component":"Structure","summary":"On certain vehicles, the sixteen (16) bolts that mount the front of the cab to two (2) cast mounting brackets were not properly torqued.  Without proper assembly torque, these bolts can loosen during normal vehicle use and fall out.  This may lead to the cab separating from the vehicle's chassis during a crash that may result in properly damage, personal injury or death.  Correction:  Dealers will replace and torque all sixteen (16) bolts.","mfr_campaign":"04521, 05502","units":1938,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"base","models":["8500 4X2","8500 6X4"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2004413"},{"source":"nhtsa","country":"us","campaign":"04V306000","date":"2004-06-30","manufacturer":"INTERNATIONAL TRUCK & ENGINE CORPORATION","component":"ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES","summary":"ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH INTERNATIONAL DT530, CUMMINS, OR CATERPILLAR I-6 ENGINES, THE POSITIVE BATTERY CABLE BETWEEN THE BATTERIES AND THE STARTER MAY RUB AGAINST AN ELECTRICAL GROUND CABLE BETWEEN THE STARTER AND FRAME RAIL.","mfr_campaign":"04510","units":18545,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["8500"],"built_from":"2001-10-10","built_to":"2004-02-16","url":"https://open.wenmarpro.com/recalls/nhtsa/04V306000"},{"source":"nhtsa","country":"us","campaign":"04V193000","date":"2004-04-22","manufacturer":"INTERNATIONAL TRUCK & ENGINE CORPORATION","component":"SEAT BELTS:FRONT:BUCKLE ASSEMBLY","summary":"CERTAIN TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, \"SEAT BELT ASSEMBLIES.\"  THE SEAT BELT LATCH FAILED A QUALITY REVIEW.","mfr_campaign":"04506","units":1687,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["8500"],"built_from":"2004-03-20","built_to":"2004-04-05","url":"https://open.wenmarpro.com/recalls/nhtsa/04V193000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}