{"vehicle":{"id":"2004_hyundai_santa-fe","year":2004,"make":"Hyundai","model":"Santa Fe"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2014322","date":"2014-08-01","manufacturer":null,"component":"Suspension","summary":"On certain vehicles, the front suspension coil springs may be susceptible to corrosion. Over time, corrosion could cause the springs to fail, potentially damaging front tires and causing rapid air loss and/or tire failure, which could increase the risk of a crash causing injury and/or property damage. Correction: Dealers will inspect and replace coil springs as necessary. Additionally, a spring guide will be installed to prevent the coil spring from contacting the tire.","mfr_campaign":"R0093","units":57794,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["SANTA FE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2014322"},{"source":"nhtsa","country":"us","campaign":"14V435000","date":"2014-07-18","manufacturer":"Hyundai Motor Company","component":"SUSPENSION:FRONT:SPRINGS:COIL SPRINGS","summary":"Hyundai Motor Company (Hyundai) is recalling certain model Year 2001-2006 Santa Fe vehicles manufactured from March 31, 2000, through February 15, 2006, that are registered and operated, or which were originally sold and registered, in the following 20 “salt belt\" states and the District of Columbia: Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin.  The affected vehicles may experience front coil spring corrosion from road salt, causing the coil spring to fracture and make contact with the tire.","mfr_campaign":"124","units":271773,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SANTA FE"],"built_from":"2000-03-31","built_to":"2005-07-14","url":"https://open.wenmarpro.com/recalls/nhtsa/14V435000"},{"source":"tc","country":"ca","campaign":"2004104","date":"2004-03-18","manufacturer":null,"component":"Brakes","summary":"On certain vehicles equipped with a 3.5L V6 engine, 4wd and ABS, if the brake pedal is depressed at speeds between 5 and 20 km/h when the brake pad friction surfaces are wet, a condition called creep vibration may occur between the brake disc and pad.  The ABS Electronic Control Unit may misinterpret the ABS sensor signal noise as indicating that the speed is above 7 km/h, causing it to activate the ABS, extending the stopping distance.  Correction:  Dealer will reprogram the ABS ECU.","mfr_campaign":"R41","units":671,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["SANTA FE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2004104"},{"source":"nhtsa","country":"us","campaign":"04V131000","date":"2004-03-16","manufacturer":"HYUNDAI MOTOR COMPANY","component":"SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE","summary":"ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 3.5 LITER V-6 ENGINES, 4-WHEEL DRIVE AND ANTILOCK BRAKING SYSTEMS (ABS),  IF THE BRAKE PEDAL IS DEPRESSED AT SPEEDS BETWEEN 3 AND 12 MPH WHEN THE BRAKE PAD FRICTION SURFACES ARE WET, A VIBRATION MAY OCCUR BETWEEN THE BRAKE DISCS AND PADS CAUSING ABS SENSOR ELECTRONIC SIGNAL NOISE TO DEVELOP.  AT SPEEDS BELOW 5 MPH, THE ABS SENSOR SIGNAL NOISE MAY CAUSE THE ABS ELECTRONIC CONTROL UNIT (ECU) TO ACTIVATE THE ABS, EXTENDING THE STOPPING DISTANCE.","mfr_campaign":"065","units":17401,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SANTA FE"],"built_from":"2002-09-03","built_to":"2004-02-27","url":"https://open.wenmarpro.com/recalls/nhtsa/04V131000"},{"source":"nhtsa","country":"us","campaign":"03V520000","date":"2003-12-18","manufacturer":"HYUNDAI MOTOR COMPANY","component":"EQUIPMENT:OTHER:LABELS","summary":"CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, \"TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS.\"","mfr_campaign":"064","units":249309,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["SANTA FE"],"built_from":"2000-03-31","built_to":"2003-09-29","url":"https://open.wenmarpro.com/recalls/nhtsa/03V520000"},{"source":"tc","country":"ca","campaign":"2003326","date":"2003-12-10","manufacturer":null,"component":"Label","summary":"On certain vehicles, the wheel rims and the tire pressure labels do not comply with CMVSS 120.  The rims do not contain the required markings and the tire pressure labels do not contain the rim size.  Correction:  Hyundai will provide owners with a corrected tire pressure label.  Since the non-compliant wheel rims do not pose any safety risk, no corrective action is required.","mfr_campaign":"R40","units":28660,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["SANTA FE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2003326"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}