{"vehicle":{"id":"2003_kenworth_t800","year":2003,"make":"Kenworth","model":"T800"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2007112","date":"2007-04-10","manufacturer":null,"component":"Powertrain","summary":"On certain trucks, the wiring, parts, or transmission programming required for the auto neutral feature to function as designed were either not installed, connected, or programmed properly.  If any of these conditions exists, the transmission will not automatically shift into Neutral when left in Drive with the parking brake engaged.  The vehicle could move without warning increasing the risk of a crash.  Correction: Dealers will inspect and, if needed, make the necessary repairs.","mfr_campaign":"07KW3","units":349,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["T800"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2007112"},{"source":"nhtsa","country":"us","campaign":"07V107000","date":"2007-03-16","manufacturer":"PACCAR INCORPORATED","component":"POWER TRAIN:AUTOMATIC TRANSMISSION","summary":"ON CERTAIN TRUCKS, THE WIRING, PARTS, OR TRANSMISSION PROGRAMMING REQUIRED FOR THE AUTO NEUTRAL FEATURE TO FUNCTION AS DESIGNED WERE EITHER NOT INSTALLED,  CONNECTED, OR PROGRAMMED PROPERLY.","mfr_campaign":"07KW3","units":4592,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["T800"],"built_from":"2002-02-06","built_to":"2007-02-26","url":"https://open.wenmarpro.com/recalls/nhtsa/07V107000"},{"source":"tc","country":"ca","campaign":"2005069","date":"2005-03-24","manufacturer":null,"component":"Heater And Defroster","summary":"On certain vehicles, burner tubes in the Webasto DBW 2010 Scholastic coolant heater may begin deteriorating at an accelerated rate and could fail.  Burner tube failure could result in an increase in exhaust gas temperature which could ignite combustible material in or around the vehicle.  Correction: Dealers will replace the burner tubes.","mfr_campaign":"05KW1","units":240,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["T800"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2005069"},{"source":"tc","country":"ca","campaign":"2004260","date":"2004-07-21","manufacturer":null,"component":"Electrical","summary":"On certain vehicles, a potential chaffing point may exist between a heat shield on the engine and the wiring for the alternator.  The interference is only present with the combination of a Caterpillar C11/C13 engine and the optional Leece Neville brushless alternator which is longer than any other alternators installed by Kenworth.  Correction:  Dealers will replace the alternator to a brush-type alternator that is shorter in length and provides the necessary clearance to all surrounding components.","mfr_campaign":"04KW3","units":18,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["T800"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2004260"},{"source":"tc","country":"ca","campaign":"2004131","date":"2004-04-13","manufacturer":null,"component":"Electrical","summary":"On certain vehicles, the cab transmission harness may have been incorrectly wired during production.  As a result, the neutral start feature of the transmission might be disabled, allowing the vehicle to start in gear.  Correction:  Dealer will inspect, and correct the connections in the wiring harness if the defect is found.","mfr_campaign":"04KW1","units":1,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["T800"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2004131"},{"source":"nhtsa","country":"us","campaign":"04V174000","date":"2004-04-12","manufacturer":"PACCAR INCORPORATED","component":"ELECTRICAL SYSTEM:WIRING","summary":"CERTAIN TRUCKS EQUIPPED WITH EATON FULLER ULTRASONIC TRANSMISSIONS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 102, \"TRANSMISSION SHIFT LEVER SEQUENCE, STARTER INTERLOCK AND TRANSMISSION BRAKING EFFECT.\"  THE CAB TRANSMISSION HARNESS COULD HAVE BEEN INCORRECTLY WIRED DURING PRODUCTION INSTALLATION.","mfr_campaign":"04KW1","units":25,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["T800"],"built_from":"2003-02-05","built_to":"2004-01-13","url":"https://open.wenmarpro.com/recalls/nhtsa/04V174000"},{"source":"tc","country":"ca","campaign":"2003183","date":"2003-08-05","manufacturer":null,"component":"Electrical","summary":"On certain vehicles, the optional battery-mounted 50 amp and/or 60 amp circuit breaker had been wired incorrectly.  If enough accessories are being used simultaneously during operation of these vehicles, this error in wiring can cause the cab power and engine to shut down prematurely without warning and could result in loss of vehicle control.  Correction:  Dealer will correct the electrical wiring if defect is found.","mfr_campaign":"03KW7","units":8,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["T800"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2003183"},{"source":"nhtsa","country":"us","campaign":"03V285000","date":"2003-08-05","manufacturer":"PACCAR INCORPORATED","component":"ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS","summary":"ON CERTAIN HEAVY DUTY TRUCKS, THE MAIN CAB WIRING HARNESS WAS INCORRECTLY CONNECTED TO THE 50 AMP CIRCUIT BREAKER INSTEAD OF THE 135 AMP BREAKER.","mfr_campaign":"03KW7","units":117,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["T800"],"built_from":"2002-07-01","built_to":"2003-07-28","url":"https://open.wenmarpro.com/recalls/nhtsa/03V285000"},{"source":"tc","country":"ca","campaign":"2003163","date":"2003-07-02","manufacturer":null,"component":"Other","summary":"On certain vehicles, the grabhandles were mounted too high and may limit the ability to maintain 3-points of contact at all times.  This condition may cause a person to slip and/or fall and could lead to personal injury.  Correction:  Dealer will relocate the handle to the proper height.","mfr_campaign":"03KW5","units":10,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["T800"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2003163"},{"source":"nhtsa","country":"us","campaign":"03V234000","date":"2003-07-01","manufacturer":"PACCAR INCORPORATED","component":"UNKNOWN OR OTHER","summary":"ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH VERTICAL TAIL PIPES, THE FRAME ACCESS GRABHANDLE IS MOUNTED TOO HIGH.","mfr_campaign":"03KW5","units":84,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["T800"],"built_from":"2002-11-12","built_to":"2003-04-30","url":"https://open.wenmarpro.com/recalls/nhtsa/03V234000"},{"source":"tc","country":"ca","campaign":"2003121","date":"2003-05-05","manufacturer":null,"component":"Other","summary":"On certain vehicles, fatigue cracks can initiate in the weld joining the bracket pin to its mounting flange on the fifth wheel assembly.  Weld failures could lead to the loss of the pin and the potential separation of the fifth wheel top plate from its mounting structure without warning.  Correction:  Dealers will replace the bracket pins.","mfr_campaign":"03KW4, 403-C","units":41,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["T800"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2003121"},{"source":"nhtsa","country":"us","campaign":"03V168000","date":"2003-05-05","manufacturer":"PACCAR INCORPORATED","component":"TRAILER HITCHES:FIFTH WHEEL ASSEMBLY","summary":"ON CERTAIN TRUCKS EQUIPPED WITH JOST INTERNATIONAL JSK 37U SERIES FIFTH WHEELS,  A FATIGUE CRACK CAN DEVELOP IN THE BRACKET PIN WELD UNDER CERTAIN LOADING CONDITIONS.","mfr_campaign":"03KW4/403-C","units":483,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["T800"],"built_from":"2001-07-18","built_to":"2003-05-15","url":"https://open.wenmarpro.com/recalls/nhtsa/03V168000"},{"source":"nhtsa","country":"us","campaign":"03V126000","date":"2003-03-31","manufacturer":"PACCAR INCORPORATED","component":"SERVICE BRAKES, AIR","summary":"CERTAIN TRUCKS EQUIPPED WITH MERITOR P 18X7 BRAKES WITH 36\" BRAKE CHAMBERS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 121, \"AIR BRAKE SYSTEMS.\"  THESE TRUCKS WERE MANUFACTURED WITH A COMBINED AIR RESERVOIR VOLUME LESS THAN 12 TIMES THE COMBINED VOLUME OF ALL SERVICE BRAKE CHAMBERS.","mfr_campaign":"03KW3","units":45,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["T800"],"built_from":"1991-01-21","built_to":"2003-02-25","url":"https://open.wenmarpro.com/recalls/nhtsa/03V126000"},{"source":"tc","country":"ca","campaign":"2003034","date":"2003-02-13","manufacturer":null,"component":"Lights And Instruments","summary":"On certain vehicles a rubber grommet from the trailer light line connector is missing.  Kenworth chassis equipped with trailer connections are experiencing corrosion at the 7-way trailer connector with the light line because of the missing grommet, which causes intermittent flashing/flickering of the trailer lights.  The elimination of this grommet allowed water to enter the connection and begin corroding, which can cause a short and/or possible fire hazard.  Correction:  Dealer will install the missing grommet and if a connector is found defective, it will be replaced.","mfr_campaign":"03KW1","units":1476,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["T800"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2003034"},{"source":"nhtsa","country":"us","campaign":"03V045000","date":"2003-02-13","manufacturer":"PACCAR INCORPORATED","component":"EXTERIOR LIGHTING","summary":"CERTAIN TRUCKS EQUIPPED WITH TRAILER CONNECTIONS  FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARDS (FMVSS) NO. 121, \"AIR BRAKE SYSTEMS,\" AND NO. 108, \"LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.\"  THE SUPPLIER REMOVED A RUBBER GROMMET FROM THE TRAILER LIGHT LINE CONNECTOR. THE VEHICLES ARE EXPERIENCING CORROSION AT THE 7-WAY TRAILER CONNECTION.  THIS CAUSES INTERMITTENT FLASHING/FLICKERING OF THE TRAILER LIGHTS.","mfr_campaign":"03KW1","units":9890,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["T800"],"built_from":"2002-05-23","built_to":"2003-02-14","url":"https://open.wenmarpro.com/recalls/nhtsa/03V045000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}