{"vehicle":{"id":"2003_infiniti_m45","year":2003,"make":"Infiniti","model":"M45"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2012087","date":"2012-03-06","manufacturer":null,"component":"Fuel System","summary":"Certain vehicles may experience fuel gauge errors.  The gauge may read higher than the actual level in the gas tank, or always indicate full.  As such, the vehicle could run out of gas without notice.  Engine stalling would result in lost vehicle propulsion which, in conjunction with traffic and road condition, and the driver's reactions, could increase the risk of a crash causing property damage and/or personal injury.  Correction: Dealers will modify the electrical circuit for the instrument gauge cluster.","mfr_campaign":"R196","units":174,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["M45"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2012087"},{"source":"nhtsa","country":"us","campaign":"12V088000","date":"2012-03-06","manufacturer":"NISSAN NORTH AMERICA, INC.","component":"FUEL SYSTEM, GASOLINE","summary":"NISSAN IS RECALLING CERTAIN MODEL YEAR 2003-2004 INFINITI M45 VEHICLES MANUFACTURED FROM MARCH 7, 2002, THROUGH JUNE 3, 2004.  DUE TO A CIRCUIT BOARD FAILURE, THE FUEL GAUGE MAY READ A FUEL LEVEL HIGHER THAN ACTUALLY EXISTS.  AS A RESULT, THE VEHICLE MAY RUN OUT OF GAS WITHOUT NOTICE.","mfr_campaign":null,"units":8120,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["M45"],"built_from":"2002-03-07","built_to":"2004-06-03","url":"https://open.wenmarpro.com/recalls/nhtsa/12V088000"},{"source":"nhtsa","country":"us","campaign":"03V455000","date":"2003-11-17","manufacturer":"NISSAN NORTH AMERICA, INC.","component":"ENGINE AND ENGINE COOLING","summary":"ON CERTAIN PASSENGER VEHICLES, THE CIRCUIT BOARD FOR THE CRANK POSITION SENSOR OR CAM POSITION SENSOR MAY HAVE AN IMPROPER SOLDER JOINT DUE TO SOLDER DEFORMATION CAUSED BY HEAT STRESS ACCELERATED BY THE EXISTENCE OF FLUX RESIDUE DURING THE SOLDERING PROCESS.","mfr_campaign":"R3021/R3022","units":630000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["M45"],"built_from":"2002-01-01","built_to":"2002-06-30","url":"https://open.wenmarpro.com/recalls/nhtsa/03V455000"},{"source":"tc","country":"ca","campaign":"2003267","date":"2003-11-05","manufacturer":null,"component":"Engine","summary":"On certain vehicles, the circuit board for the crank position sensor may have an improper solder joint.  This could cause the Service Engine Soon warning light to come on, create a no start condition, cause reduced engine power, or cause the engine to stop running without warning during vehicle operation.  Correction: Dealers will replace the crankshaft position sensor and both camshaft position sensors.","mfr_campaign":"R86","units":74143,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["M45"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2003267"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}