{"vehicle":{"id":"2000_buick_century","year":2000,"make":"Buick","model":"Century"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"nhtsa","country":"us","campaign":"01V109000","date":"2001-04-06","manufacturer":"GENERAL MOTORS CORP.","component":"SEAT BELTS","summary":"VEHICLE DESCRIPTION:  CERTAIN PASSENGER VEHICLES, EQUIPPED WITH SUNVISOR LOCATED AIR BAG LABELS, FAIL TO CONFORM TO FEDERAL MOTOR VEHICLES SAFETY STANDARD NO. 208, \"OCCUPANT CRASH PROTECTION.\"  THESE VEHICLES HAVE A MESSAGE AREA LESS THAN 30 CM WHICH DOES NOT MEET THE REQUIREMENTS OF THE STANDARD.","mfr_campaign":"01017","units":116007,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CENTURY"],"built_from":"2000-03-01","built_to":"2000-06-30","url":"https://open.wenmarpro.com/recalls/nhtsa/01V109000"},{"source":"nhtsa","country":"us","campaign":"00V371000","date":"2000-11-13","manufacturer":"GENERAL MOTORS CORP.","component":"AIR BAGS:SIDE/WINDOW","summary":"VEHICLE DESCRIPTION:  PASSENGER VEHICLES.  SOME OF THESE VEHICLES EXHIBIT A CONDITION IN WHICH THE DRIVER SIDE IMPACT AIR BAG INFLATOR SEPARATES FROM THE AIR BAG MODULE DURING DEPLOYMENT.","mfr_campaign":"00090","units":12,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CENTURY"],"built_from":"2000-02-01","built_to":"2000-07-31","url":"https://open.wenmarpro.com/recalls/nhtsa/00V371000"},{"source":"tc","country":"ca","campaign":"2000196","date":"2000-09-15","manufacturer":null,"component":"Seats And Restraints","summary":"Certain vehicles do not comply with the requirements of C.M.V.S.S. 209 - Seat Belt Assemblies.  Vehicles may have seat belt assemblies that will not withstand the force requirements of the standard.  In a crash, if the belt buckle fails, there is an increased risk of injury to the occupant.  Correction:  Suspect buckle assemblies will be replaced.","mfr_campaign":"00067","units":16621,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["CENTURY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2000196"},{"source":"nhtsa","country":"us","campaign":"00V228003","date":"2000-08-07","manufacturer":"GENERAL MOTORS CORP.","component":"SEAT BELTS","summary":"VEHICLE DESCRIPTION:  PASSENGER VEHICLES, LIGHT DUTY TRUCKS, SPORT UTILITY VEHICLES, AND MINI VANS EQUIPPED WITH TRW SEAT BELT BUCKLE ASSEMBLIES.  THE BUCKLE BASE OF THESE SEAT BELT ASSEMBLIES WERE NOT PROPERLY HEAT TREATED AND THEREFORE DO NOT PASS THE LOAD BEARING REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, \"SEAT BELT ASSEMBLIES.\"","mfr_campaign":"00067","units":156305,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CENTURY"],"built_from":"2000-04-01","built_to":"2000-05-31","url":"https://open.wenmarpro.com/recalls/nhtsa/00V228003"},{"source":"tc","country":"ca","campaign":"2000139","date":"2000-06-20","manufacturer":null,"component":"Fuel System","summary":"Certain vehicles do not comply with the requirements of CMVSS 301 - Fuel System Integrity.  The clamp that secures the flexible fuel fill hose to the metal fuel fill tube may be loose and could separate in a crash or rollover.  In the presence of an ignition source, a fire could result.  Correction:  Fuel hose fill neck clamp will be inspected and if necessary, the clamp will be repositioned and tightened.","mfr_campaign":"00056","units":7,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["CENTURY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2000139"},{"source":"nhtsa","country":"us","campaign":"00V160000","date":"2000-06-16","manufacturer":"GENERAL MOTORS CORP.","component":"FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP","summary":"VEHICLE DESCRIPTION:   PASSENGER VEHICLES.  THE CLAMP THAT SECURES THE FLEXIBLE FUEL FILL HOSE TO THE METAL FILL TUBE MAY BE LOOSE AND COULD SEPARATE.","mfr_campaign":"00056","units":248,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CENTURY"],"built_from":"2000-05-01","built_to":"2000-05-31","url":"https://open.wenmarpro.com/recalls/nhtsa/00V160000"},{"source":"tc","country":"ca","campaign":"2000124","date":"2000-05-31","manufacturer":null,"component":"Brakes","summary":"Certain vehicles equipped with rear drum brakes may exhibit a condition in which the bolt head(s) on the rear spindle rod may separate.  There may be a noticeable rattle in the rear suspension.  If the remaining portion of the bolt breaks, the wheel can shift, causing rear steering of the vehicle.  This could cause the driver to lose control and a crash could occur without prior warning.  Correction:  Dealers will replace the rear spindle rod bolts on affected vehicles.","mfr_campaign":"00047","units":996,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CENTURY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2000124"},{"source":"nhtsa","country":"us","campaign":"00V143000","date":"2000-05-17","manufacturer":"GENERAL MOTORS CORP.","component":"SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DRUM","summary":"VEHICLE DESCRIPTION:  PASSENGER VEHICLES EQUIPPED WITH REAR DRUM BRAKES.  THE BOLT HEAD(S) ON THE REAR SPINDLE ROD CAN SEPARATE.","mfr_campaign":"00047","units":18754,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CENTURY"],"built_from":"1999-11-01","built_to":"2000-01-31","url":"https://open.wenmarpro.com/recalls/nhtsa/00V143000"},{"source":"tc","country":"ca","campaign":"1999225","date":"1999-11-30","manufacturer":null,"component":"Emissions","summary":"Certain vehicles do not comply with the requirements of CMVSS. 1105 - Evaporative Emissions.  Vehicles may have an OBD-II (On Board Diagnostics) calibration that causes a false evaporative emission system code to set under certain conditions, resulting in Malfunction Indicator Lamp (MIL) illumination.  Correction:  Dealers will reflash the vehicle PCM (Power Control Module) with new calibration software.","mfr_campaign":"99077","units":5227,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["CENTURY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1999225"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}