{"vehicle":{"id":"1999_yamaha_yzf-r1","year":1999,"make":"Yamaha","model":"YZF-R1"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2000071","date":"2000-03-17","manufacturer":null,"component":"Brakes","summary":"On certain vehicles, the front brake pad material could separate from the backing plate due to insufficient adhesion. If pad separation occurs, there could be loss of braking ability with the front brake, which could lead to a possible crash.  Correction:  Front brake pads will be replaced with ones that have the pad material properly adhered to the backing plates.","mfr_campaign":"M00-036","units":1098,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["YZF-R1"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2000071"},{"source":"tc","country":"ca","campaign":"2000070","date":"2000-03-17","manufacturer":null,"component":"Structure","summary":"On certain motorcycles, the screws holding the side stand switch may loosen and fall out due to engine heat and vibration. If this happens, the side stand switch will not function correctly, making it possible to ride the motorcycle with the side stand in the down position. If a side stand in the down position were to hit the ground during a turn, loss of control and a vehicle crash could occur.  Correction:  Screws holding the side stand switch will be replaced with a combination of bolts and nuts which will hold the switch securely.","mfr_campaign":"M00-035","units":3500,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["YZF-R1"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2000070"},{"source":"tc","country":"ca","campaign":"1999141","date":"1999-07-27","manufacturer":null,"component":"Engine","summary":"On certain motorcycles, a coolant hose clamp at the thermostat housing may not have been properly tightened and could permit the hose to come off during motorcycle operation.  Steam released from the cooling system could obscure the vision of the rider and/or leaking coolant could cause the rear tire to slip, resulting in loss of vehicle control and a possible crash.  Correction: Coolant hose clamps will be replaced and properly tightened.","mfr_campaign":"M99-036","units":1199,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["YZF-R1"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1999141"},{"source":"nhtsa","country":"us","campaign":"99V186000","date":"1999-07-12","manufacturer":"YAMAHA MOTOR CORPORATION, USA","component":"ENGINE AND ENGINE COOLING:COOLING SYSTEM","summary":"VEHICLE DESCRIPTION:  MOTORCYCLES.  A COOLANT WATER HOSE CAN COME LOOSE AT THE THERMOSTAT HOUSING DURING OPERATION.","mfr_campaign":null,"units":6373,"do_not_drive":false,"park_outside":false,"notification":null,"match":"base","models":["YZFR1K","YZFR1KC","YZFR1L","YZFR1LC"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/nhtsa/99V186000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}