{"vehicle":{"id":"1999_jeep_grand-cherokee","year":1999,"make":"Jeep","model":"Grand Cherokee"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2013222","date":"2013-06-26","manufacturer":null,"component":"Structure","summary":"Chrysler Canada has determined that an opportunity to incrementally improve performance in certain types of low-speed impacts may exist in certain vehicles. The company will carry out a voluntary customer satisfaction campaign to minimize the risk of fuel leakage in certain low-speed collisions. Chrysler will inspect the affected vehicles and will replace aftermarket trailer hitches that present sharp edges or puncture risks to the fuel tank with a Chrysler trailer hitch as necessary. This action is not being conducted under the requirements of the Motor Vehicle Safety Act.","mfr_campaign":"N47","units":62760,"do_not_drive":null,"park_outside":null,"notification":"Service Campaign Mfr","match":"exact","models":["GRAND CHEROKEE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2013222"},{"source":"tc","country":"ca","campaign":"2002074","date":"2002-04-17","manufacturer":null,"component":"Engine","summary":"Certain sport utility vehicles equipped with a 4.0L engine only. The design of the intake and exhaust manifolds could allow debris to accumulate at the #3 cylinder location. This could result in a vehicle fire. Correction: Dealers will install a manifold shield to modify the air flow characteristics and to prevent the accumulation of debris in the area of the #3 cylinder.","mfr_campaign":"B06","units":43127,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["GRAND CHEROKEE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2002074"},{"source":"nhtsa","country":"us","campaign":"02V104000","date":"2002-04-08","manufacturer":"DAIMLERCHRYSLER CORPORATION","component":"FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:INJECTORS","summary":"ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH A 4.0L ENGINE ONLY, THE DESIGN OF THE INTAKE AND EXHAUST MANIFOLDS COULD ALLOW DEBRIS TO ACCUMULATE AT THE #3 CYLINDER LOCATION.","mfr_campaign":"B06","units":1115322,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["GRAND CHEROKEE"],"built_from":"1998-06-01","built_to":"2002-03-05","url":"https://open.wenmarpro.com/recalls/nhtsa/02V104000"},{"source":"tc","country":"ca","campaign":"2001134","date":"2001-05-24","manufacturer":null,"component":"Seats And Restraints","summary":"Certain vehicles fail to comply with requirements of C.M.V.S.S. No. 209, \"Seat Belt Assemblies.\" The front seat belt retractor may not work properly, it therefore will not adequately protect occupants in the event of a crash. Correction:  Dealers will replace the seat belt retractor.","mfr_campaign":"978","units":10930,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["GRAND CHEROKEE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2001134"},{"source":"nhtsa","country":"us","campaign":"01V119000","date":"2001-04-11","manufacturer":"DAIMLERCHRYSLER CORPORATION","component":"SEAT BELTS:FRONT:RETRACTOR","summary":"VEHICLE DESCRIPTION:  CERTAIN VAN, WAGON, PICKUP TRUCKS, PASSENGER AND SPORT UTILITY VEHICLES,  FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 209, \"SEAT BELT ASSEMBLIES.\"  THE FRONT SEAT BELT RETRACTOR MAY NOT COMPLY WITH THE REQUIREMENTS OF THE STANDARD.","mfr_campaign":"978","units":161682,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["GRAND CHEROKEE"],"built_from":"1998-12-06","built_to":"1999-01-15","url":"https://open.wenmarpro.com/recalls/nhtsa/01V119000"},{"source":"tc","country":"ca","campaign":"2000045","date":"2000-02-28","manufacturer":null,"component":"Seats And Restraints","summary":"On certain vehicles, the adjustable turning loop on the shoulder belt top mounting bolt may have been manufactured with a core hardness that exceeds the specification for this type of application.  Due to the excessive core hardness, these mounting bolts may not withstand the force required to function properly in certain impact situations, increasing the risk of injury to a belted occupant.  Correction:  The upper adjustable turning loop bolt will be replaced with a bolt of proper hardness.","mfr_campaign":"866","units":17530,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["GRAND CHEROKEE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2000045"},{"source":"nhtsa","country":"us","campaign":"00V034000","date":"2000-02-04","manufacturer":"DAIMLERCHRYSLER CORPORATION","component":"SEAT BELTS","summary":"VEHICLE DESCRIPTION:  PASSENGER VEHICLES.   THE SEAT BELT SHOULDER HEIGHT ADJUSTABLE TURNING LOOP (ATL) TOP MOUNTING BOLT WAS INADEQUATELY MANUFACTURED.","mfr_campaign":"866","units":204000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["GRAND CHEROKEE"],"built_from":"1999-04-15","built_to":"1999-08-20","url":"https://open.wenmarpro.com/recalls/nhtsa/00V034000"},{"source":"tc","country":"ca","campaign":"1998232","date":"1998-11-24","manufacturer":null,"component":"Seats And Restraints","summary":"On certain vehicles, the rear outboard seatbelt retractor spring could disengage from the rewind mechanism, disabling the retractor function which prevents the belt from fitting snugly around the occupant.  Correction: Rear outboard seat belt retractor assemblies will be replaced.","mfr_campaign":"809","units":1041,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["GRAND CHEROKEE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1998232"},{"source":"tc","country":"ca","campaign":"1998226","date":"1998-11-20","manufacturer":null,"component":"Emissions","summary":"Certain vehicles do not comply with CMVSS 1101 - emission device. The wrong vehicle emission control information label (veci) may have been installed.  Correction: A correct vehicle emission control information label along with installation instructions will be mailed to owners.","mfr_campaign":"807","units":143,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["GRAND CHEROKEE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1998226"},{"source":"tc","country":"ca","campaign":"1998215","date":"1998-11-09","manufacturer":null,"component":"Emissions","summary":"Certain vehicles may not comply with CMVSS 1103 - exhaust emissions. The spark plugs on these vehicles may fail due to loose centre electrodes. Plug failure may result in exhaust emissions in excess of the regulations. Correction: Spark plugs will be replaced on affected vehicles.","mfr_campaign":"806","units":134,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["GRAND CHEROKEE"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1998215"},{"source":"nhtsa","country":"us","campaign":"98V276000","date":"1998-11-04","manufacturer":"CHRYSLER CORPORATION","component":"SEAT BELTS:REAR/OTHER","summary":"VEHICLE DESCRIPTION:  PASSENGER VEHICLES.  THE REAR OUTBOARD SEAT BELT RETRACTOR SPRING CAN DISENGAGE FROM THE REWIND MECHANISM, DISABLING THE RETRACTOR FUNCTION, AND PREVENTING THE BELT FROM FITTING SNUGLY AROUND THE OCCUPANT.","mfr_campaign":null,"units":13000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["GRAND CHEROKEE"],"built_from":"1998-07-15","built_to":"1998-09-15","url":"https://open.wenmarpro.com/recalls/nhtsa/98V276000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}