{"vehicle":{"id":"1997_mazda_protege","year":1997,"make":"Mazda","model":"Protege"},"as_of":"2026-10-19","counts":{"count":83,"by_type":[{"id":"service_bulletin","name":"Service bulletin","count":83}],"components":[{"id":"equipment","name":"Equipment and accessories","count":31},{"id":"electrical","name":"Electrical system","count":18},{"id":"powertrain","name":"Transmission and driveline","count":9},{"id":"engine","name":"Engine","count":8},{"id":"structure-body","name":"Body and frame","count":7},{"id":"labels-manuals","name":"Labels and manuals","count":7},{"id":"battery","name":"12-volt battery","count":6},{"id":"hvac","name":"Heating and air conditioning","count":5},{"id":"brakes","name":"Brakes","count":4},{"id":"automatic-transmission","name":"Automatic transmission","count":3},{"id":"instrument-cluster","name":"Instrument cluster","count":3},{"id":"suspension","name":"Suspension","count":3},{"id":"speed-control","name":"Throttle and cruise control","count":3},{"id":"air-bags","name":"Air bags","count":2},{"id":"exhaust-emissions","name":"Exhaust and emissions","count":2},{"id":"axle","name":"Axle","count":1},{"id":"brake-caliper","name":"Brake caliper","count":1},{"id":"door-latch","name":"Door latch","count":1},{"id":"driveshaft","name":"Driveshaft","count":1},{"id":"fuel-system","name":"Fuel system","count":1},{"id":"fuel-tank","name":"Fuel tank","count":1},{"id":"visibility","name":"Glass, wipers and mirrors","count":1},{"id":"ignition","name":"Ignition","count":1},{"id":"latches-locks","name":"Latches and locks","count":1},{"id":"lighting","name":"Lighting","count":1},{"id":"mirror","name":"Mirrors","count":1},{"id":"seat-belts","name":"Seat belts","count":1},{"id":"starter","name":"Starter","count":1},{"id":"steering","name":"Steering","count":1},{"id":"transmission-control-module","name":"Transmission control module","count":1},{"id":"wiring","name":"Wiring and fuses","count":1}],"codes":[],"topics":[{"id":"maintenance","name":"maintenance","count":5}]},"bulletins":[{"nhtsa_id":10213429,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2022-06-06","date":"2016-02-26","document_id":"0901216","mfr_campaign":null,"component":"EQUIPMENT","summary":"Paint damage Mazda pocket paint guide","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2016/MC-10213429-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2016/MC-10213429-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10213429"},{"nhtsa_id":10213425,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2022-06-06","date":"2016-02-17","document_id":"0900716","mfr_campaign":null,"component":"ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER","summary":"Speedometer replacement procedure","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2016/MC-10213425-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2016/MC-10213425-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10213425"},{"nhtsa_id":10213333,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2022-06-06","date":"2016-02-15","document_id":"0100516","mfr_campaign":null,"component":"ELECTRICAL SYSTEM:12V/24V/48V BATTERY; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL","summary":"Battery test procedure requirements using the GR81291","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2016/MC-10213333-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2016/MC-10213333-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10213333"},{"nhtsa_id":10200933,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2021-09-03","date":"2021-08-24","document_id":"01-006-21-3779a","mfr_campaign":null,"component":"ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ENGINE AND ENGINE COOLING","summary":"This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10200933-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10200933-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10200933"},{"nhtsa_id":10200527,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2021-08-24","date":"2021-08-17","document_id":"09-025-21-3824","mfr_campaign":null,"component":"EQUIPMENT","summary":"This service bulletin provides information regarding the proper use of the driver’s floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10200527-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10200527-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10200527"},{"nhtsa_id":10188016,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2021-03-03","date":"2021-02-08","document_id":"01-006-21-3779","mfr_campaign":null,"component":"ELECTRICAL SYSTEM","summary":"This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10188016-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10188016-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10188016"},{"nhtsa_id":10188015,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2021-03-03","date":"2021-02-08","document_id":"01-005-21-3778","mfr_campaign":null,"component":"ELECTRICAL SYSTEM","summary":"The Mazda DCA-8000PM is required for all warranty battery testing. If the Mazda DCA-8000PM is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10188015-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10188015-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10188015"},{"nhtsa_id":10186703,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2021-02-05","date":"2021-01-21","document_id":"09-002-21-3770","mfr_campaign":null,"component":"ELECTRICAL SYSTEM; VEHICLE SPEED CONTROL; EQUIPMENT","summary":"In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10186703-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2021/MC-10186703-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10186703"},{"nhtsa_id":10170661,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2020-01-23","date":"2020-01-09","document_id":"09-003-20-3671","mfr_campaign":null,"component":"EQUIPMENT; ELECTRICAL SYSTEM","summary":"In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer’s responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. • Mazda vehicles are manufactured with tamper-proof speedometers. • When a speedometer is replaced, the new speedometer will read zero (0) miles. • This procedure is extremely important to accurately represent actual vehicle mileage. • Prior to speedometer removal, complete the information required on the “Speedometer Replacement Label”. Labels can only be ordered through Mazda eStore. • In an effort to achieve a higher level of Customer Experience and retain the value of Mazda’s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO’s services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2020/MC-10170661-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2020/MC-10170661-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10170661"},{"nhtsa_id":10154879,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-03-21","date":"2019-03-20","document_id":"00-003-19-3583","mfr_campaign":null,"component":"FUEL SYSTEM, DIESEL:STORAGE:TANK ASSEMBLY; FUEL SYSTEM, GASOLINE; ENGINE AND ENGINE COOLING; EQUIPMENT","summary":"In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10154879-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10154879-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10154879"},{"nhtsa_id":10153339,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-02-19","date":"2019-01-14","document_id":"09-009-19-3566","mfr_campaign":null,"component":"ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL","summary":"In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the \"Speedometer Replacement Label\". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153339-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153339-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10153339"},{"nhtsa_id":10153331,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-02-19","date":"2019-01-03","document_id":"09-002-19-3554","mfr_campaign":null,"component":"EQUIPMENT ADAPTIVE/MOBILITY","summary":"This service bulletin provides information regarding the proper use of the driver's floor mat to avoid anypotential interference with the foot pedals. The following are possible causes of floor mat interference,which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153331-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153331-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10153331"},{"nhtsa_id":10153311,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-02-19","date":"2019-01-09","document_id":"01-004-19-3558","mfr_campaign":null,"component":"ENGINE AND ENGINE COOLING","summary":"On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system.When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur tooxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153311-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153311-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10153311"},{"nhtsa_id":10153309,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-02-19","date":"2019-01-02","document_id":"01-002-19-3552","mfr_campaign":null,"component":"ELECTRICAL SYSTEM","summary":"The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS codes are six-digit alpha-numeric markings molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery. NOTE: Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery. 2. CCA (Cold Cranking Amps):CCA ratings are normally located on a sticker affixed to the top of the battery to indicate a battery's Cold Cranking Amps. CCA rated batteries are supplied with domestically produced vehicles. NOTE: If an incorrect CCA rating is entered into the Mazda GR8-1291, it will result in a false result and invalid Warranty Code from the tester. This will also result in unnecessary replacement of batteries.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153309-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153309-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10153309"},{"nhtsa_id":10153308,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2019-02-19","date":"2019-01-02","document_id":"01-001-19-3551","mfr_campaign":null,"component":"ELECTRICAL SYSTEM","summary":"This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153308-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2019/MC-10153308-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10153308"},{"nhtsa_id":10148072,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-11-13","date":"2018-10-10","document_id":"09-034-18-3430a","mfr_campaign":null,"component":"EQUIPMENT; VEHICLE SPEED CONTROL","summary":"In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the \"Speedometer Replacement Label\". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10148072-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10148072-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10148072"},{"nhtsa_id":10148068,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-11-13","date":"2018-10-10","document_id":"09-014-18-3443a","mfr_campaign":null,"component":"EQUIPMENT; STRUCTURE","summary":"When encountering a vehicle with paint damage, refer to the \"Mazda Pocket Paint Guide\" to determine cause, prevention, remedy, and warranty coverage (if applicable). Copies of the Mazda Pocket Paint Guide are available for order on Mazda e-Store (part number: 9999-95-MPPG-12).","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10148068-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10148068-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10148068"},{"nhtsa_id":10148003,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-11-13","date":"2018-10-10","document_id":"00-003-18-3480a","mfr_campaign":null,"component":"SERVICE BRAKES, HYDRAULIC; EQUIPMENT","summary":"Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAO authorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorized equipment program. NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claims are subject to denial or debit.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10148003-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10148003-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10148003"},{"nhtsa_id":10148002,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-11-13","date":"2018-10-10","document_id":"00-001-18-3446a","mfr_campaign":null,"component":"EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT","summary":"Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle- specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10148002-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10148002-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10148002"},{"nhtsa_id":10145242,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-10-09","date":"2018-09-06","document_id":"01-016-18-3522","mfr_campaign":null,"component":"ENGINE AND ENGINE COOLING:EXHAUST SYSTEM","summary":"On some vehicles, a sulfur smell or 'rotten egg' odor may be noticed coming from the exhaust system. The odor is usually noticed after a cold start, fast idle, extended periods of idling and full throttle acceleration. Sulfur smell is not an indication of an engine concern and will not cause reduced driveability or durability of the engine or any of its emission components. The sulfur smell or 'rotten egg' odor is caused by high amounts of sulfur in the gasoline being used in the vehicle. Sulfur is normally eliminated during the refining process, but the EPA regulation of sulfur in gasoline differs from state to state. Vehicles using fuel containing high amounts of sulfur will most likely emit sulfur smell from the exhaust system. When high sulfur fuel is burned, there is a chemical reaction in the catalytic converter causing the sulfur to oxidize. As the vehicle is driven, the oxidizing reaction odor in the converter will decrease with mileage and age.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10145242-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10145242-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10145242"},{"nhtsa_id":10144333,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-09-10","date":"2018-08-31","document_id":"09-034-18-3430","mfr_campaign":null,"component":"VEHICLE SPEED CONTROL","summary":"In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the \"Speedometer Replacement Label\". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10144333-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10144333-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10144333"},{"nhtsa_id":10142515,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-07-02","date":"2018-05-11","document_id":"00-003-18-3480","mfr_campaign":null,"component":"SERVICE BRAKES","summary":"Mazda North American Operations has approved an additional on-car brake lathe as an option for MNAOauthorized equipment. The Pro-Cut On-Car Brake Lathe has been added to the MNAO authorizedequipment program.NOTE: Accu-turn is still an approved brake lathe, but it is no longer available for purchase from our vendor. IMPORTANT: Rotors must be machined using a Mazda approved on-car brake lathe, or warranty claimsare subject to denial or debit.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10142515-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10142515-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10142515"},{"nhtsa_id":10134929,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-04-23","date":"2018-03-26","document_id":"01-009-18-3452","mfr_campaign":null,"component":"ELECTRICAL SYSTEM:12V/24V/48V BATTERY","summary":"The Mazda GR8-1291 is required for all warranty battery testing. If the Mazda GR8-1291 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10134929-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10134929-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10134929"},{"nhtsa_id":10134928,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-04-23","date":"2018-03-26","document_id":"01-008-18-3451","mfr_campaign":null,"component":"ELECTRICAL SYSTEM:12V/24V/48V BATTERY","summary":"This service bulletin provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the battery periodically according to the repair procedure.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10134928-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10134928-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10134928"},{"nhtsa_id":10134703,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2018-04-23","date":"2018-03-26","document_id":"09-019-18-3450","mfr_campaign":null,"component":"EQUIPMENT ADAPTIVE/MOBILITY","summary":"This service bulletin provides information regarding the proper use of the driver's floor mat to avoid any potential interference with the foot pedals. The following are possible causes of floor mat interference, which can be avoided with proper usage. Floor mat moves forward due to improper installation. Inappropriate floor mat (such as aftermarket, non-factory-equipped, or non-genuine) is used. Floor mat is stacked one on top of another. Use these points at your dealership to protect our mutual operations and to help ensure our customers' safety.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10134703-9999.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2018/MC-10134703-0001.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10134703"}],"next_cursor":"2018-04-23_10134703","note":"A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.","attribution":[]}