{"vehicle":{"id":"1995_mercury_villager","year":1995,"make":"Mercury","model":"Villager"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"2001025","date":"2001-02-09","manufacturer":null,"component":"Fuel System","summary":"On certain vehicles, cracks could develop in the fuel vent hose. If (1) the fuel tank is overfilled, not allowing excess fuel in the vent hose to flow back into the tank, (2) the vehicle is driven only a short distance after refueling and, (3) there is subsequently significant heating of the fuel tank, the fuel in the tank can expand into the vent hose and leak fuel.  Fuel leakage in the presence of an ignition source can result in a fire.  Correction:  Fuel tank vent hose will be replaced.","mfr_campaign":"00S59","units":39378,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["VILLAGER"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/2001025"},{"source":"nhtsa","country":"us","campaign":"00V419002","date":"2001-01-02","manufacturer":"FORD MOTOR COMPANY","component":"FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY","summary":"VEHICLE DESCRIPTION:  MINIVANS.     THE FUEL TANK VENT HOSE ALLOWS AIR TO VENT FROM THE FUEL TANK DURING REFUELING.  CRACKS HAVE DEVELOPED IN THE VENT HOSE.  IF (1) THE FUEL TANK IS OVERFILLED, NOT ALLOWING EXCESS FUEL IN THE VENT HOSE TO FLOW BACK INTO THE TANK, (2) THE VEHICLE IS DRIVEN ONLY A SHORT DISTANCE AFTER REFUELING AND, (3) THERE IS SUBSEQUENTLY SIGNIFICANT HEATING OF THE FUEL TANK, THE FUEL IN THE TANK CAN EXPAND INTO THE VENT HOSE AND LEAK FUEL.","mfr_campaign":"00S59","units":394000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["VILLAGER"],"built_from":"1991-11-26","built_to":"1998-06-26","url":"https://open.wenmarpro.com/recalls/nhtsa/00V419002"},{"source":"nhtsa","country":"us","campaign":"96V253003","date":"1998-08-17","manufacturer":"FORD MOTOR COMPANY","component":"EXTERIOR LIGHTING:TAIL LIGHTS","summary":"THE REAR LAMP SOCKET MAY NOT ILLUMINATE BECAUSE THE METAL CAN IN THE LAMP SOCKET MOVES OR SEPARATES FROM THE PLASTIC SOCKET HOUSING.","mfr_campaign":null,"units":72940,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["VILLAGER"],"built_from":"1994-04-15","built_to":"1996-09-15","url":"https://open.wenmarpro.com/recalls/nhtsa/96V253003"},{"source":"tc","country":"ca","campaign":"1997012","date":"1997-01-21","manufacturer":null,"component":"Lights And Instruments","summary":"A REAR LAMP ON THESE VEHICLES MAY NOT ILLUMINATE BECAUSE THE METAL CAN IN THE LAMP SOCKET MOVES OR SEPARATES FROM THE PLASTIC SOCKET HOUSING. THIS CAN RESULT IN THE STOP/TAIL COMBINATION LAMP OR THE TURN SIGNAL LAMP NOT FUNCTIONING. THE CENTER HIGH MOUNTED STOP LAMP OPERATION IS NOT AFFECTED.\nCORRECTION: BOTH REAR LAMP SOCKET ASSEMBLIES WILL BE REPLACED WITH AN IMPROVED ASSEMBLY.","mfr_campaign":"96S61","units":11193,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["VILLAGER"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1997012"},{"source":"tc","country":"ca","campaign":"1996103","date":"1996-07-11","manufacturer":null,"component":"Seats And Restraints","summary":"THESE VEHICLES MAY NOT COMPLY WITH C.M.V.S.S. 207 - ANCHORAGE OF SEATS AND 210 - SEAT BELT ASSEMBLY ANCHORAGES. CERTAIN SEAT ANCHORAGES ARE ATTACHED TO THE THIRD SEAT. THE SLIDING SEAT LATCH ON THIS SEAT MAY NOT FULLY ENGAGE AND THEREFORE THE SEAT MAY NOT SUSTAIN THE LOADS SPECIFIED IN THE STANDARDS.  CORRECTION: THE ROLLER ASSEMBLY IN THE THIRD ROW SEAT ACTUATOR ASSEMBLY WILL BE REPLACED.","mfr_campaign":"96S40","units":543,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["VILLAGER"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1996103"},{"source":"nhtsa","country":"us","campaign":"96V089001","date":"1996-06-03","manufacturer":"FORD MOTOR COMPANY","component":"SEATS","summary":"AN OUT-OF-SPECIFICATION CONDITION IN THE SEAT CABLE ROLLER PULLEY ASSEMBLY CAN ALLOW THE CABLE THAT CONNECTS THE SEAT ADJUST LEVER TO THE LATCH TO BE PINCHED IN THE ROLLER ASSEMBLY.","mfr_campaign":null,"units":6600,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["VILLAGER"],"built_from":"1995-07-01","built_to":"1995-08-01","url":"https://open.wenmarpro.com/recalls/nhtsa/96V089001"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}