{"vehicle":{"id":"1992_freightliner_fl80","year":1992,"make":"Freightliner","model":"FL80"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"nhtsa","country":"us","campaign":"97V114001","date":"1997-08-04","manufacturer":"FREIGHTLINER CORPORATION","component":"EXTERIOR LIGHTING:TURN SIGNAL:SWITCH","summary":"VEHICLE DESCRIPTION:  HEAVY DUTY TRUCK.   THE SHOULDER BOLT WHICH HOLDS THE GROTE TURN SIGNAL SWITCH CASE AND COMPONENTS TOGETHER CAN LOOSEN RESULTING IN THE TURN SIGNAL MALFUNCTIONING.","mfr_campaign":null,"units":77000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["FL80"],"built_from":"1991-12-03","built_to":"1994-07-01","url":"https://open.wenmarpro.com/recalls/nhtsa/97V114001"},{"source":"tc","country":"ca","campaign":"1995076","date":"1995-05-03","manufacturer":null,"component":"Brakes","summary":"NOTE: VEHICLES EQUIPPED WITH ROCKWELL WABCO SYSTEM SAVER 1000 AIR DRYERS.\nIN AIR BRAKE SYSTEMS REQUIRING A LARGE VOLUME OF AIR TO PASS THROUGH THE DRYER IN A SHORT PERIOD OF TIME, THE DRYER CANNOT REMOVE ALL OF THE MOISTURE FROM THE AIR. IN A COLD ENVIRONMENT THIS MOISTURE MAY FREEZE AND EFFECTIVELY BLOCK THE AIR LINES DOWNSTREAM OF THE DRYER RESULTING IN AN AIR PRESSURE BUILD UP IN THE DRYER. THIS AIR PRESSURE MAY EVENTUALLY CAUSE THE DRYER CARTRIDGE TO SEPARATE FROM THE DRYER. THE SEPARATED CARTRIDGE MAY CAUSE BODILY INJURY TO ANYONE STANDING NEAR THE DRYER AT THE INSTANT OF SEPARATION.\nCORRECTION: PRESSURE RELIEF VALVES WILL BE INSTALLED IN THE DRYER OUTLET PORTS ON THE AFFECTED VEHICLES.","mfr_campaign":"FC-085A","units":1798,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["FL80"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1995076"},{"source":"nhtsa","country":"us","campaign":"93V148000","date":"1993-09-14","manufacturer":"FREIGHTLINER CORP.","component":"VISIBILITY:WINDSHIELD WIPER/WASHER","summary":"THE WINDSHIELD WIPER ARM SUPPORT CRACKS WHERE THE WIPER ARM PIVOT MOUNTS TO THE SUPPORT BRACKETS CAUSING FAILURE OF THE SYSTEM.","mfr_campaign":null,"units":985,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["FL80"],"built_from":"1991-05-01","built_to":"1992-03-01","url":"https://open.wenmarpro.com/recalls/nhtsa/93V148000"},{"source":"tc","country":"ca","campaign":"1993122","date":"1993-09-13","manufacturer":null,"component":"Visual System","summary":"THE WINDSHIELD WIPER ARM SUPPORT BRACKET MAY CRACK WHERE THE WIPER ARM PIVOT MOUNTS TO THE SUPPORT BRACKET. THIS COULD RESULT IN SUDDEN FAILURE OF THE WINDSHIELD WIPER SYSTEM WITHOUT PRIOR WARNING AND COULD CAUSE IMPAIRED DRIVER VISION IF THE FAILURE WERE TO OCCUR DURING INCLEMENT WEATHER CONDITIONS.\nCORRECTION: WINDSHIELD WIPER ARM SUPPORT BRACKET WILL BE REPLACED WITH A REDESIGNED SUPPORT BRACKET.","mfr_campaign":"FC-074A","units":105,"do_not_drive":null,"park_outside":null,"notification":"Safety TC","match":"exact","models":["FL80"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1993122"},{"source":"tc","country":"ca","campaign":"1992062","date":"1992-05-26","manufacturer":null,"component":"Seats And Restraints","summary":"THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 210 - SEAT BELT ASSEMBLY  ANCHORAGES. - WELDING MATERIALS USED ON THE INBOARD ANCHORAGE BRACKET  UNDER THE CAB DECK WILL NOT MEET THE LOAD TEST REQUIREMENTS OF THE  STANDARD WHEN 3 SEATING POSITIONS ARE PROVIDED.\nCORRECTION: VEHICLES WILL REQUIRE ADDITIONAL REINFORCEMENT IN THE UPPER B  PILLAR AND ADDITIONAL FASTENERS IN THE LOWER DECK ANCHORAGE BRACKET.","mfr_campaign":"FC064A","units":205,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["FL80"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1992062"},{"source":"nhtsa","country":"us","campaign":"92V057000","date":"1992-04-14","manufacturer":"FREIGHTLINER CORPORATION","component":"SEAT BELTS:FRONT:ANCHORAGE","summary":"A NUMBER OF CABS WERE ASSEMBLED WITH FEWER WELDS THAN SPECIFIED IN THE UPPER B PILLAR NEAR THE ANCHORAGE FOR THE SEAT BELT. WELDING MATERIALS USED ON THE INBOARD ANCHORAGE BRACKET UNDER THE CAB DECK WILL NOT MEET FMVSS NO. 210 LOAD TEST REQUIREMENTS WHEN THREE SEATING POSITIONS ARE PROVIDED.","mfr_campaign":null,"units":1400,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["FL-80"],"built_from":"1991-05-01","built_to":"1992-07-01","url":"https://open.wenmarpro.com/recalls/nhtsa/92V057000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}