{"vehicle":{"id":"1992_dodge_caravan","year":1992,"make":"Dodge","model":"Caravan"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"1999145","date":"1999-07-30","manufacturer":null,"component":"Visual System","summary":"On certain vehicles, the left hand windshield wiper pivot drive arm was not mechanically staked to the pivot shaft.  This may allow the drive arm to disengage from the shaft and lead to a loss of wiper function.  Correction:  The left windshield wiper pivot assembly will be replaced with one that incorporates an improved mechanical connection of the drive link to the pivot shaft.","mfr_campaign":"836","units":163025,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CARAVAN"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1999145"},{"source":"nhtsa","country":"us","campaign":"99V189000","date":"1999-07-16","manufacturer":"DAIMLERCHRYSLER CORPORATION","component":"VISIBILITY:WINDSHIELD WIPER/WASHER:LINKAGES","summary":"VEHICLE DESCRIPTION:   MINIVANS.  THE LEFT HAND WINDSHIELD WIPER PIVOT DRIVE ARM WAS NOT MECHANICALLY STAKED TO THE PIVOT SHAFT.","mfr_campaign":"836","units":828559,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CARAVAN"],"built_from":"1990-07-01","built_to":"1993-05-15","url":"https://open.wenmarpro.com/recalls/nhtsa/99V189000"},{"source":"tc","country":"ca","campaign":"1997162","date":"1997-09-29","manufacturer":null,"component":"Seats And Restraints","summary":"The first row rear seat outboard side seat belt anchor hook can become unattached from the body anchor position.  Also, the covers on solid stalk mounted seat belt buckles may become dislodged.  Should a cover become dislodged, the release button may stick inside the cover creating the potential for the buckle to become partially latched.  In the event of a vehicle crash, either of these conditions could result in the occupant not being properly restrained.  Correction: Anchor hook retaining clip will be replace with a revised profile clip and cover plate.  Dealers will also install a cover retaining clip to the stalk mounted buckle cover to prevent dislocation of the buckle cover.","mfr_campaign":"742","units":153541,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CARAVAN"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1997162"},{"source":"nhtsa","country":"us","campaign":"97V149000","date":"1997-09-09","manufacturer":"CHRYSLER CORPORATION","component":"SEAT BELTS:FRONT:ANCHORAGE","summary":"VEHICLE DESCRIPTION:  PASSENGER MINI-VANS. THE CENTER REAR SEAT, RIGHT OUTBOARD SIDE, SAFETY BELT ANCHOR HOOK CAN BECOME UNATTACHED FROM THE BODY ANCHOR POSITION.","mfr_campaign":null,"units":1100000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CARAVAN"],"built_from":"1990-08-01","built_to":"1993-03-30","url":"https://open.wenmarpro.com/recalls/nhtsa/97V149000"},{"source":"nhtsa","country":"us","campaign":"97V148000","date":"1997-09-09","manufacturer":"CHRYSLER CORPORATION","component":"SEAT BELTS:FRONT:BUCKLE ASSEMBLY","summary":"VEHICLE DESCRIPTION:  PASSENGER MINI-VANS.  COVERS ON THE SOLID STALK MOUNTED SEAT BELT BUCKLES CAN BECOME DISLODGED CAUSING THE RELEASE BUTTON TO STICK INSIDE THE COVER.  THE BUCKLE WOULD THEN BE ONLY PARTIALLY LATCHED.","mfr_campaign":null,"units":1100000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CARAVAN"],"built_from":"1990-08-01","built_to":"1993-03-30","url":"https://open.wenmarpro.com/recalls/nhtsa/97V148000"},{"source":"tc","country":"ca","campaign":"1997104","date":"1997-05-28","manufacturer":null,"component":"Structure","summary":"A combination of no bolt torque, high pressure in the strut and a severe duty cycle can create the potential for the liftgate strut attaching bolts to separate.  This could result in injury to persons standing under the liftgate at the time of failure.  Correction: Liftgate struts will be inspected for loose fasteners.  If fasteners are loose, the strut (and integral bolts) will be replaced.  If the bolt shows evidence of torque, the bolt will be removed, large washers will be installed and bolt will be torqued to specification.","mfr_campaign":"730","units":246405,"do_not_drive":null,"park_outside":null,"notification":"Safety TC","match":"exact","models":["CARAVAN"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1997104"},{"source":"nhtsa","country":"us","campaign":"97V079000","date":"1997-05-16","manufacturer":"CHRYSLER CORPORATION","component":"STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE/STRUT","summary":"THE BOLTS USED TO ATTACH THE STRUT TO THE BODY AND THE REAR LIFTGATE CAN ACCUMULATE FATIGUE DAMAGE IF THREE FACTORS COMBINE.  IF THE BOLT IS LOOSE, THE GAS STRUT IS OVER-PRESSURIZED, AND THE FREQUENCY OF OPENING AND CLOSING CYCLES IS HIGHER THAN FOR THE AVERAGE CUSTOMER, THE BOLT CAN FAIL.","mfr_campaign":null,"units":436000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CARAVAN"],"built_from":"1991-07-01","built_to":"1992-06-30","url":"https://open.wenmarpro.com/recalls/nhtsa/97V079000"},{"source":"tc","country":"ca","campaign":"1996198","date":"1996-12-09","manufacturer":null,"component":"Steering","summary":"The steering wheel armature stamping may crack and separate from the centre hub of the steering column.  This could adversely affect steering control and result in a possible crash without prior warning.  Correction: Steering wheels exhibiting cracks will be replaced.  All other involved vehicles will have a anti-separation plate installed to prevent separation of the steering wheel from the steering column.","mfr_campaign":"708","units":77024,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CARAVAN"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1996198"},{"source":"nhtsa","country":"us","campaign":"96V229000","date":"1996-11-18","manufacturer":"CHRYSLER CORPORATION","component":"STEERING: STEERING WHEEL/HANDLE BAR","summary":"THE STEERING WHEEL ARMATURE STAMPING CAN CRACK AND SEPARATE FROM THE CENTER HUB ATTACHMENT TO THE STEERING COLUMN.","mfr_campaign":null,"units":675000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CARAVAN"],"built_from":"1991-01-01","built_to":"1992-06-30","url":"https://open.wenmarpro.com/recalls/nhtsa/96V229000"},{"source":"nhtsa","country":"us","campaign":"96V099000","date":"1996-06-13","manufacturer":"CHRYSLER CORPORATION","component":"SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP","summary":"THE ABS HYDRAULIC CONTROL UNIT CAN EXPERIENCE EXCESSIVE BRAKE ACTUATOR PISTON SEAL WEAR CAUSING PUMP-MOTOR DETERIORATION.","mfr_campaign":"685","units":321000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CARAVAN"],"built_from":"1990-07-01","built_to":"1993-06-01","url":"https://open.wenmarpro.com/recalls/nhtsa/96V099000"},{"source":"tc","country":"ca","campaign":"1996063","date":"1996-04-29","manufacturer":null,"component":"Brakes","summary":"Note: Vehicles equipped with Bendix-10 Antilock Brake System (ABS) Vehicles with ABS brakes may experience premature actuator piston seal wear in the ABS hydraulic control unit and/or actuator pump motor deterioration.  If this occurs, the ABS function may be lost and reduced power assist may be experienced during vehicle braking.  Correction: Vehicles with ABS malfunction will be repaired as necessary.  Warranty on all ABS components will be extended to 10 years or 160,000 km (except for the brake actuator piston assembly and the pump-motor assembly which will have lifetime coverage).","mfr_campaign":"685","units":24055,"do_not_drive":null,"park_outside":null,"notification":"Safety TC","match":"exact","models":["CARAVAN"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1996063"},{"source":"nhtsa","country":"us","campaign":"92V147000","date":"1992-10-14","manufacturer":"CHRYSLER CORPORATION","component":"FUEL SYSTEM, GASOLINE","summary":"FUEL TANK FLANGES WERE NOT BENT AS REQUIRED TO ALLOW THE SPECIFIED CLEARANCE FOR THE FUEL TANK MOUNTING STRAPS AND FUEL LINES AT THE TANK.","mfr_campaign":null,"units":3000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CARAVAN"],"built_from":"1992-04-01","built_to":"1992-04-01","url":"https://open.wenmarpro.com/recalls/nhtsa/92V147000"},{"source":"nhtsa","country":"us","campaign":"92V015000","date":"1992-02-14","manufacturer":"CHRYSLER CORPORATION","component":"STEERING: STEERING WHEEL/HANDLE BAR","summary":"THE ZINC PLATING OPERATION PERFORMED ON THE UPPER STEERING COLUMN SHAFT COUPLING BOLT CAUSED HYDROGEN EMBRITTLEMENT AND BREAKAGE OF THE BOLT.","mfr_campaign":null,"units":20000,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CARAVAN"],"built_from":"1991-10-01","built_to":"1991-10-01","url":"https://open.wenmarpro.com/recalls/nhtsa/92V015000"},{"source":"tc","country":"ca","campaign":"1992018","date":"1992-02-13","manufacturer":null,"component":"Steering","summary":"A steering column coupling bolt may fracture due to hydrogen embrittlement, causing loss of clamping load on the steering column shaft coupling with resultant loss of steering control.  Correction: Zinc plated steering column coupling bolts will be replaced with a phosphate coated bolt.","mfr_campaign":"538","units":2829,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CARAVAN"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1992018"},{"source":"tc","country":"ca","campaign":"1991152","date":"1991-11-13","manufacturer":null,"component":"Brakes","summary":"The brake pad to pedal arm strength may not be adequate due to mis-location of welds.  Should the brake pedal separate, loss of vehicle braking integrity may occur.  Correction: Brake pedal assembly will be replaced with a properly manufactured one.","mfr_campaign":"326T","units":11,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CARAVAN"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1991152"},{"source":"nhtsa","country":"us","campaign":"91V170000","date":"1991-10-04","manufacturer":"CHRYSLER CORPORATION","component":"SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES","summary":"THE BRAKE PEDAL PAD ATTACHMENT TO THE PEDAL ARM MAY NOT HAVE ADEQUATE STRENGTH DUE TO MISLOCATION OF WELDS, AND COULD BREAK.","mfr_campaign":null,"units":360,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CARAVAN"],"built_from":"1991-08-01","built_to":"1991-08-01","url":"https://open.wenmarpro.com/recalls/nhtsa/91V170000"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}