{"vehicle":{"id":"1990_buick_century","year":1990,"make":"Buick","model":"Century"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"1995165","date":"1995-09-20","manufacturer":null,"component":"Seats And Restraints","summary":"THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 210 - SEAT BELT ASSEMBLY ANCHORAGE. VEHICLES WERE ASSEMBLED WITH REAR OUTBOARD SEAT BELT ANCHORAGES THAT MAY NOT WITHSTAND THE REQUIRED LOAD. DURING LOADING, STRESS COULD CAUSE THE ATTACHMENT METAL TO TEAR AND ALLOW THE ANCHORAGE TO SEPARATE FROM THE BODY.\nCORRECTION: DEALERS WILL REPLACE THE EXISTING ANCHOR BOLTS WITH NEW SHOULDER BOLTS AND THREAD LOCKING ADHESIVE. NOISE CONTROL PATCHES WILL ALSO BE APPLIED AT EACH ANCHORAGE.","mfr_campaign":"5D30/95058","units":184500,"do_not_drive":null,"park_outside":null,"notification":"Compliance TC","match":"exact","models":["CENTURY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1995165"},{"source":"nhtsa","country":"us","campaign":"95V173000","date":"1995-09-15","manufacturer":"GENERAL MOTORS CORP.","component":"SEAT BELTS:FRONT:ANCHORAGE","summary":"THESE VEHICLES WERE ASSEMBLED WITH REAR OUTBOARD SAFETY BELT ANCHORAGES THAT MAY NOT WITHSTAND THE REQUIRED LOAD. THIS DOES NOT COMPLY WITH FMVSS NO.210, \"SEAT BELT ASSEMBLY ANCHORAGES.\"","mfr_campaign":null,"units":2216325,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CENTURY"],"built_from":"1988-04-01","built_to":"1995-08-30","url":"https://open.wenmarpro.com/recalls/nhtsa/95V173000"},{"source":"nhtsa","country":"us","campaign":"92V124000","date":"1992-09-01","manufacturer":"GENERAL MOTORS CORP.","component":"SEATS:FRONT ASSEMBLY:RECLINER","summary":"THE POWER SEAT OR RECLINER WIRING HARNESS CAN BE PINCHED OR CAN CHAFE ON THE SEAT FRAME OR SPRING SUPPORT ROD, WEARING THROUGH THE WIRE INSULATION AND CAUSING AN ELECTRICAL SHORT.","mfr_campaign":null,"units":319181,"do_not_drive":false,"park_outside":false,"notification":null,"match":"exact","models":["CENTURY"],"built_from":"1989-08-01","built_to":"1991-07-01","url":"https://open.wenmarpro.com/recalls/nhtsa/92V124000"},{"source":"tc","country":"ca","campaign":"1992103","date":"1992-08-25","manufacturer":null,"component":"Electrical","summary":"On certain vehicles, the power seat or recliner wiring harness may become pinched or chafed causing possible short circuits. These short circuits may then cause the circuit breaker to weld closed and the unprotected short circuit could overheat and possibly ignite the seat cushion materials.  Correction: Wiring harness will be inspected and harness rerouted using a wiring harness clip.","mfr_campaign":"2D14/92038","units":57116,"do_not_drive":null,"park_outside":null,"notification":"Safety Mfr","match":"exact","models":["CENTURY"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1992103"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}