{"vehicle":{"id":"1988_ford_bronco-ii","year":1988,"make":"Ford","model":"Bronco II"},"may_apply":true,"as_of":{"us":"2026-10-19","ca":"2026-10-19"},"recalls":[{"source":"tc","country":"ca","campaign":"1995212","date":"1995-11-29","manufacturer":null,"component":"Electrical","summary":"A SHORT CIRCUIT COULD DEVELOP IN THE IGNITION SWITCH THAT COULD LEAD TO OVERHEATING, SMOKE, AND POSSIBLY FIRE IN THE STEERING COLUMN OF THE VEHICLE. THIS CONDITION MAY OCCUR WHILE THE VEHICLE IS IN USE OR UNATTENDED.  CORRECTION: IGNITION SWITCH WILL BE REPLACED WITH A REVISED DESIGN SWITCH.","mfr_campaign":"95S28","units":834368,"do_not_drive":null,"park_outside":null,"notification":"Safety TC","match":"exact","models":["BRONCO II"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1995212"},{"source":"tc","country":"ca","campaign":"1994016","date":"1994-02-02","manufacturer":null,"component":"Emissions","summary":"THESE VEHICLES DO NOT COMPLY WITH C.M.V.S.S. 1103 - EXHAUST EMISSIONS.  NITROUS OXIDE LEVELS EXCEED THE STANDARD.  CORRECTION: OWNERS WILL BE PROVIDED WITH REVISED STARTING INSTRUCTIONS FOR THE OWNER GUIDE. CERTAIN VEHICLES WILL HAVE THE ENGINE EMISSIONS CONTROL SYSTEMS MODIFIED AND EXHAUST SYSTEM CATALYSTS REPLACED.","mfr_campaign":"93E37","units":7563,"do_not_drive":null,"park_outside":null,"notification":"Compliance Mfr","match":"exact","models":["BRONCO II"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1994016"},{"source":"tc","country":"ca","campaign":"1991021","date":"1991-02-11","manufacturer":null,"component":"Engine","summary":"THIS RECALL SUPERSEDES RECALL 90-27 FOR VEHICLES IN THE MARITIMES.  THE THROTTLE MAY STICK IN AN OPEN POSITION DUE TO LINKAGE BINDING   CAUSED BY CORROSION. THIS WOULD CAUSE THE ENGINE TO RUN AT HIGHER THAN IDLE SPEED WHEN THE THROTTLE IS RELEASED AND COULD ADVERSELY AFFECT DRIVER CONTROL RESULTING IN A POSSIBLE CRASH.  CORRECTION: A STAINLESS STEEL SLEEVE, WHICH WILL BE PLACED OVER THE HUB    ON THE THROTTLE BODY ASSEMBLY, AND A SECONDARY THROTTLE LEVER TO FIT THE SLEEVE, ALONG WITH OTHER MOUNTING PARTS, WILL BE INSTALLED ON AFFECTED VEHICLES.","mfr_campaign":"91S25","units":113833,"do_not_drive":null,"park_outside":null,"notification":"Safety TC","match":"exact","models":["BRONCO II"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1991021"},{"source":"tc","country":"ca","campaign":"1990027","date":"1990-02-09","manufacturer":null,"component":"Engine","summary":"RANGER/BRONCO II - 2.9 LITRE ENGINES\nTAURUS/SABLE - 3.0 LITRE ENGINES\nNOTE: VEHICLES LOCATED IN NEWFOUNDLAND, NOVA SCOTIA, NEW BRUNSWICK AND  PRINCE EDWARD ISLAND.\nTHE THROTTLE MAY STICK IN AN OPEN POSITION DUE TO LINKAGE BINDING CAUSED  BY CORROSION. THIS WOULD CAUSE THE ENGINE TO RUN AT HIGHER THAN IDLE  SPEED WHEN THE THROTTLE IS RELEASED AND COULD ADVERSELY AFFECT DRIVER  CONTROL RESULTING IN A POSSIBLE CRASH.\nCORRECTION: ON VEHICLES WITH 2.9 LITRE ENGINES, DEALERS WILL CLEAN,  MODIFY AND LUBRICATE THE HUB PIN AND LEVER BUSHINGS WITH A MARINE-TYPE  ANTI-SEIZE GREASE. ADDITIONALLY, ON VEHICLES WITH 3.0 LITRE ENGINES, THE  HUB PIN LEVER ASSEMBLY WILL BE REPLACED.\nNOTE: THIS RECALL HAS BEEN SUPERSEDED BY RECALL NO. 91021.","mfr_campaign":"90S02","units":15909,"do_not_drive":null,"park_outside":null,"notification":"Safety TC","match":"exact","models":["BRONCO II"],"built_from":null,"built_to":null,"url":"https://open.wenmarpro.com/recalls/tc/1990027"}],"lookup":{"nhtsa":"https://www.nhtsa.gov/recalls","tc":"https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/VRDB-BDRV/search-recherche/menu.aspx?lang=eng","maker":null},"attribution":["Contains information licensed under the Open Government Licence – Canada."]}