{"nhtsa_id":11033117,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2026-06-02","date":"2026-05-29","document_id":"09-018-26","mfr_campaign":null,"replaces":null,"component":"STRUCTURE:BODY","mfr_system":"Doors","summary":"This bulletin supersedes the previously issued bulletin(s) listed below. The changes are noted in Red. 09-031/25 08/05/25 DESCRIPTION While driving on gravel or dusty roads, dust accumulates at the lower inner edge of the door garnish. When the rear door is opened, the dust may be blown up and enter the cabin, adhering to the seats and the floor. This is caused by a large gap at the lower part of the boundary between the rear door and the front door, and air containing dust and/or sand is sucked up into the gap, accumulating at the lower edge of the rear door garnish while driving. To eliminate this concern, a mass production change is under study. NOTE: In environments where passengers frequently enter and exit the vehicle under dusty conditions (e.g. dirt or gravel roads, off-road driving), a certain amount of dust will enter into the cabin, even in other types of vehicles. Therefore, this phenomenon is not limited to the causes described in this document. Customers having this concern should have their vehicle repaired using the following repair procedure. NOTE: This repair procedure is an interim countermeasure. After a mass production change is implemented, the repair procedure will be updated. Attach the protectors (urethane pads, deflectors and protectors) to both sides of the designated locations according to the following steps.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2026/MC-11033117-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2026/MC-11033117-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/11033117","components":[{"id":"structure-body","name":"Body and frame","parent":null}],"codes":[],"topics":[],"vehicles":[{"make":"MAZDA","model":"CX-70","year_from":2025,"year_to":2026,"match":"exact","vehicle_ids":["2025_mazda_cx-70","2026_mazda_cx-70"]},{"make":"MAZDA","model":"CX-70 PLUG-IN HYBRID","year_from":2025,"year_to":2026,"match":"base","vehicle_ids":["2025_mazda_cx-70","2026_mazda_cx-70"]},{"make":"MAZDA","model":"CX-90","year_from":2024,"year_to":2026,"match":"exact","vehicle_ids":["2024_mazda_cx-90","2025_mazda_cx-90","2026_mazda_cx-90"]},{"make":"MAZDA","model":"CX-90 PLUG-IN HYBRID","year_from":2024,"year_to":2026,"match":"base","vehicle_ids":["2024_mazda_cx-90","2025_mazda_cx-90","2026_mazda_cx-90"]}],"as_of":"2026-10-19","note":"A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.","attribution":[]}