{"nhtsa_id":11013683,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2025-02-05","date":"2025-02-05","document_id":"AR881","mfr_campaign":null,"replaces":null,"component":"SUSPENSION; STEERING","mfr_system":null,"summary":"Complaint: Sway bar design (angles) incorrect near sway bar link bolts. Cause: Design. Correction: Redesigned sway bar by changing angles and length of sway bar. Including new, stronger sway bar link assemblies with bar. The sway bar/links are now engineered together with the correct working angles. Step 1- Raise and support vehicle suitably with suspension and wheels in normal driving position. Step 2- Remove sway bar to frame bolts, nuts, clamps and bushings from bar and save for reinstallation. Step 3- Remove sway bar links from bar. Discard sway bar and links. Step 4- Install new sway bar links (2010847) onto new sway bar (2010657) and attach to lower control arms. Assemble both sides loosely at this time. Step 5- Sway bar is not symmetrical. Orient sway bar so ends bend down towards the sway bar link. Shown below. Step 6- Install sway bar bushings and clamps onto new bar and bolt into place. Torque frame bolts and nuts to spec. See below. Step 7- Torque sway bar link bolts to 15 ft lbs.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2025/MC-11013683-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2025/MC-11013683-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/11013683","components":[{"id":"steering","name":"Steering","parent":null},{"id":"suspension","name":"Suspension","parent":null}],"codes":[],"topics":[],"vehicles":[{"make":"ARBOC SPECIALTY VEHICLES","model":"SPIRIT OF MOBILITY","year_from":2018,"year_to":2018,"match":null,"vehicle_ids":[]}],"as_of":"2026-10-19","note":"A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.","attribution":[]}