{"nhtsa_id":10192646,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2021-05-10","date":"2015-09-23","document_id":"NTB15042A","mfr_campaign":null,"replaces":null,"component":"SEATS; EQUIPMENT","mfr_system":null,"summary":"SERVICE INFORMATION If the A/C compressor on an Applied Vehicle is being replaced for any reason, perform the following: 1. Evacuate the system?s refrigerant. 2. Record the amount evacuated (this will determine if step 4 applies). NOTE: Make sure your Robinair/Tech-Mate Air-Conditioning Machine # 48710 is calibrated. 3. Replace the compressor with the one listed in FAST or your electronic parts catalog. - Refer to the applicable Electronic Service Manual (ESM), section HAC-Heater & Air Conditioning System, for compressor removal and installation procedure. 4. If the amount initially evacuated was less than 600 grams (1.32 pounds), check for leaks and repair as needed. 5. Evacuate and charge the A/C system. - Ideal refrigerant charge amount: 700 grams (1.54 pounds) - Acceptable charge amount: 700 grams +/- 50 grams (1.54 pounds +/- 0.11 pounds) NOTE: Do not use the charge capacity value listed in NV200 Taxi ESMs. See this bulletin.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2015/MC-10192646-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2015/MC-10192646-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10192646","components":[{"id":"equipment","name":"Equipment and accessories","parent":null},{"id":"seats","name":"Seats","parent":null}],"codes":[],"topics":[],"vehicles":[{"make":"NISSAN","model":"NV200 TAXI","year_from":2014,"year_to":2015,"match":"base","vehicle_ids":["2014_nissan_nv200","2015_nissan_nv200"]}],"as_of":"2026-10-19","note":"A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.","attribution":[]}