{"nhtsa_id":10192373,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2021-05-10","date":"2014-05-22","document_id":"NTB14047","mfr_campaign":null,"replaces":null,"component":"ELECTRICAL SYSTEM; STRUCTURE","mfr_system":null,"summary":"IF YOU CONFIRM: The \"front door power window and door lock/unlock switch (RH) finisher\" (switch finisher) has a loose fit, causting an excessive gap. See Figure 1. ACTION: 1. Remove the passenger front door finisher (door finisher). - Refer to the Electronic Service Manual (ESM), section INT-Interior, for removal procedure. 2. Install a foam block where shown in SERVICE PROCEDURE. - Use the foam block listed in PARTS INFORMATION. 3. Install the door finisher with a new switch finisher listed in PARTS INFORMATION. - Refer to the ESM, section INT-Interior, for installation procedure. See this bulletin for further detail.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2014/MC-10192373-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2014/MC-10192373-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10192373","components":[{"id":"structure-body","name":"Body and frame","parent":null},{"id":"electrical","name":"Electrical system","parent":null}],"codes":[],"topics":[],"vehicles":[{"make":"NISSAN","model":"ROGUE","year_from":2014,"year_to":2014,"match":"exact","vehicle_ids":["2014_nissan_rogue"]}],"as_of":"2026-10-19","note":"A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.","attribution":[]}