{"nhtsa_id":10175612,"type":"service_bulletin","type_name":"Service bulletin","date_added":"2020-05-26","date":"2020-04-01","document_id":"9004166","mfr_campaign":null,"replaces":null,"component":"FUEL SYSTEM, GASOLINE; STEERING","mfr_system":null,"summary":"DAMPER, Steering Additional service procedure steps before replacing the steering damper: Before istalling the steering damper to the vehicle, it is important to prime the new damper by 5 continuous compression ? extension stroke cycles by hand, each cycle consists of a full compression and a full extension stroke, without stops as fast as possible. Use large screwdrivers inserted in the bushings to aid in purging. This will allow you to stand on the lower screwdriver to hold the damper stationary and pump the rod end easier. Perform purge before installing NOTE: Hand purge to be completed in a vertical position with the base cup sticker end down toward the ground and the rod side facing up.See CSN V41 for detail procedure.","document":{"url":"https://static.nhtsa.gov/odi/tsbs/2020/MC-10175612-0001.pdf","alternate_url":"https://static.nhtsa.gov/odi/tsbs/2020/MC-10175612-9999.pdf","confirmed":false},"url":"https://open.wenmarpro.com/bulletins/10175612","components":[{"id":"fuel-system","name":"Fuel system","parent":null},{"id":"steering","name":"Steering","parent":null}],"codes":[],"topics":[],"vehicles":[{"make":"JEEP","model":"WRANGLER","year_from":2018,"year_to":2020,"match":"exact","vehicle_ids":["2018_jeep_wrangler","2019_jeep_wrangler","2020_jeep_wrangler"]}],"as_of":"2026-10-19","note":"A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.","attribution":[]}